It's not clear that we actually require XOPEN_VERSION to be 600 or greater
at this time, so skip the check for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on a post on the gcc-help mailing list and some subsequent reading,
we can increase our portability to various platforms by directly defining
the POSIX and X/OPEN API feature sets we wish to have available. This patch
does that, and also includes a double-check to ensure that the system
we are compiling on can actually provide the requested feature sets.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes some small changes to handle watchdog timeouts in a better way,
and also uses a 'cleaner' method of including the spandsp header files.
(closes issue #14769)
Reported by: andrew
Patches:
app_fax-20090406.diff uploaded by andrew (license 240)
v1-14769.patch uploaded by dimas (license 88)
Tested by: freh, deti, caspy, dimas, sgimeno, Dovid
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The udptl-updates branch that was merged yesterday failed to properly send back
T.38 SDP responses with the correct error correction mode, if the incoming SDP
from the other end caused us to change error correction modes. This patch
corrects that situation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208548 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Recent changes in T.38 negotiation in Asterisk caused these applications to
not respond when the other endpoint initiated a switchover to T.38; this
resulted in the T.38 switchover failing, and the FAX attempt to be made
using an audio connection, instead of T.38 (which would usually cause the
FAX to fail completely).
This patch corrects this problem, and the applications will now correctly
respond to the T.38 switchover request. In addition, the response will include
the appopriate T.38 session parameters based on what the other end offered
and what our end is capable of.
(closes issue #14849)
Reported by: afosorio
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing some reading about OpenSSL, I noticed a couple of things that
needed to be improved with our usage of OpenSSL.
1) We had initialization of the library done in multiple modules. This has now
been moved to a core function that gets executed during Asterisk startup.
We already link OpenSSL into the core for TCP/TLS functionality, so this
was the most logical place to do it.
2) OpenSSL is not thread-safe by default. However, making it thread safe is
very easy. We just have to provide a couple of callbacks. One callback
returns a thread ID. The other handles locking. For more information,
start with the "Is OpenSSL thread-safe?" question on the FAQ page of
openssl.org.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also go back and wrap all of the places that use the specific reverse charge
APIs with preprocessor conditionals.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204681 | dvossel | 2009-07-02 10:05:57 -0500 (Thu, 02 Jul 2009) | 14 lines
Improved mapping of extension states from combined device states.
This fixes a few issues with incorrect extension states and adds
a cli command, core show device2extenstate, to display all possible
state mappings.
(closes issue #15413)
Reported by: legart
Patches:
exten_helper.diff uploaded by dvossel (license 671)
Tested by: dvossel, legart, amilcar
Review: https://reviewboard.asterisk.org/r/301/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204710 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also change the default casing of the string contants to lowercase. This really
just saves us from have to lowercase them later when displaying them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Modules placed in the priority heap for loading were not properly removed from the linked list. This resulted in some modules attempting to load twice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@202410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201261 | kpfleming | 2009-06-17 07:03:25 -0500 (Wed, 17 Jun 2009) | 9 lines
Correct AST_LIST_APPEND_LIST behavior when list to be appended is empty.
When the list to be appended is empty, and the list to be appended to is *not*,
AST_LIST_APPEND_LIST would actually cause the target list to become broken,
and no longer have a pointer to its last entry. This patch fixes the problem.
(reported by Stanislaw Pitucha on the asterisk-dev mailing list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some applications (notably app_fax) do not need digit detection nor FAX tone
detection while they are running, and if Asterisk is using software DSPs to provide
the detection, this consumes extra CPU cycles that could be better spent on the
actual application. This patch allows applications to query and control the state
of digit and tone detection on a channel, and modifies app_fax to disable them
while the FAX operations are occurring (and re-enable digit detection afterwards).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix up modules in the 'apps' directory, and also correct the bad example of
enum definitions in include/asterisk/app.h, which many developers followed
(thanks for reading the documentation!). In addition, add some basic usage
examples of the 'pahole' and 'pglobal' tools to the coding guidelines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199626 | seanbright | 2009-06-08 15:24:32 -0400 (Mon, 08 Jun 2009) | 21 lines
Increase the size of our thread stack on 64 bit processors.
We were setting the stack size for each thread to 240KB regardless of
architecture, which meant that in some scenarios we actually had less available
stack space on 64 bit processors (pointers use 8 bytes instead of 4). So now we
calculate the stack size we reserve based on the platform's __WORDSIZE, which
gives us:
32 bit -> 240KB
64 bit -> 496KB
128 bit -> 1008KB (that's right, we're ready for 128 bit processors)
Patch typed by me but written by several members of #asterisk-dev, including
Kevin, Tilghman, and Qwell.
(closes issue #14932)
Reported by: jpiszcz
Patches:
06052009_issue14932.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
r199628 | seanbright | 2009-06-08 15:28:33 -0400 (Mon, 08 Jun 2009) | 2 lines
Fix a typo in the stack size calculation just introduced.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199297 | dvossel | 2009-06-05 16:19:56 -0500 (Fri, 05 Jun 2009) | 14 lines
Fixes issue with hints giving unexpected results.
Hints with two or more devices that include ONHOLD gave unexpected results.
(closes issue #15057)
Reported by: p_lindheimer
Patches:
onhold_trunk.diff uploaded by dvossel (license 671)
pbx.c.1.4.patch uploaded by p (license 558)
devicestate.c.trunk.patch uploaded by p (license 671)
Tested by: p_lindheimer, dvossel
Review: https://reviewboard.asterisk.org/r/254/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199022 | seanbright | 2009-06-04 10:14:57 -0400 (Thu, 04 Jun 2009) | 40 lines
Safely handle AMI connections/reload requests that occur during startup.
During asterisk startup, a lock on the list of modules is obtained by the
primary thread while each module is initialized. Issue 13778 pointed out a
problem with this approach, however. Because the AMI is loaded before other
modules, it is possible for a module reload to be issued by a connected client
(via Action: Command), causing a deadlock.
The resolution for 13778 was to move initialization of the manager to happen
after the other modules had already been lodaded. While this fixed this
particular issue, it caused a problem for users (like FreePBX) who call AMI
scripts via an #exec in a configuration file (See issue 15189).
The solution I have come up with is to defer any reload requests that come in
until after the server is fully booted. When a call comes in to
ast_module_reload (from wherever) before we are fully booted, the request is
added to a queue of pending requests. Once we are done booting up, we then
execute these deferred requests in turn.
Note that I have tried to make this a bit more intelligent in that it will not
queue up more than 1 request for the same module to be reloaded, and if a
general reload request comes in ('module reload') the queue is flushed and we
only issue a single deferred reload for the entire system.
As for how this will impact existing installations - Before 13778, a reload
issued before module initialization was completed would result in a deadlock.
After 13778, you simply couldn't connect to the manager during startup (which
causes problems with #exec-that-calls-AMI configuration files). I believe this
is a good general purpose solution that won't negatively impact existing
installations.
(closes issue #15189)
(closes issue #13778)
Reported by: p_lindheimer
Patches:
06032009_15189_deferred_reloads.diff uploaded by seanbright (license 71)
Tested by: p_lindheimer, seanbright
Review: https://reviewboard.asterisk.org/r/272/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The function ast_call_forward() forwards a call to an extension specified in an ast_channel's call_forward string. After an ast_channel is called, if the channel's call_forward string is set this function can be used to forward the call to a new channel and terminate the original one. I have included this api call in both channel.c's ast_request_and_dial() and feature.c's feature_request_and_dial(). App_dial and app_queue already contain call forward logic specific for their application and options.
(closes issue #13630)
Reported by: festr
Review: https://reviewboard.asterisk.org/r/271/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
