https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322749 | rmudgett | 2011-06-09 11:31:53 -0500 (Thu, 09 Jun 2011) | 15 lines
Remove potential deadlock in call pickup race.
Deadlock is possible in ast_do_pickup() when holding the target channel
lock and trying to get the chan channel lock. Also, holding the target
lock when calling ast_channel_masquerade() is not a good idea because that
routine does deadlock avoidance.
* Removed the need to hold the target lock after marking the target with a
datastore and getting the connected line data off of the target channel.
* Moved can_pickup() to ast_can_pickup() in features.c. Now all the call
pickup methods use the same basic call pickup availability check.
Review: https://reviewboard.asterisk.org/r/1234/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_string_field_build_va functions were written to take to separate
va_lists to work around FreeBSD 4 not having va_copy defined.
In the end, we don't support anything using gcc < 3 anyway because we use
va_copy all over the place anyway. This patch just simplifies things by
removing the second va_list function arguments in favor of va_copy.
Review: https://reviewboard.asterisk.org/r/1233/
--This line, and those below, will be ignored--
M include/asterisk/stringfields.h
M main/utils.c
M main/channel.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320796 | rmudgett | 2011-05-25 11:23:11 -0500 (Wed, 25 May 2011) | 17 lines
Give zombies a safe channel driver to use.
Recent crashes from zombie channels suggests that they need a safe home to
goto. When a masquerade happens, the physical part of the zombie channel
is hungup. The hangup normally sets the channel private pointer to NULL.
If someone then blindly does a callback to the channel driver, a crash is
likely because the private pointer is NULL.
The masquerade now sets the channel technology of zombie channels to the
kill channel driver.
Related to the following issues:
(issue #19116)
(issue #19310)
Review: https://reviewboard.asterisk.org/r/1224/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318671 | alecdavis | 2011-05-13 10:52:08 +1200 (Fri, 13 May 2011) | 30 lines
Fix directed group pickup feature code *8 with pickupsounds enabled
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315503 | tilghman | 2011-04-26 14:32:50 -0500 (Tue, 26 Apr 2011) | 28 lines
Merged revisions 315502 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315502 | tilghman | 2011-04-26 14:22:52 -0500 (Tue, 26 Apr 2011) | 21 lines
Merged revisions 315501 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315501 | tilghman | 2011-04-26 14:18:46 -0500 (Tue, 26 Apr 2011) | 14 lines
Fix the bounds-checking code.
The code that set the bit within the select bitfield was correct, but the
bounds-checking code was not. The change to that line uses the new _bitsize
macro for clarity. Also, FD_ZERO macro did not zero-out anything but the
first word of the bitfield, so this could have caused problems with modules
using that macro with the expanded bitfield.
(closes issue #18773)
Reported by: jamicque
Patches:
20110423__issue18773.diff.txt uploaded by tilghman (license 14)
Tested by: chris-mac
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309808 | tilghman | 2011-03-06 18:54:42 -0600 (Sun, 06 Mar 2011) | 14 lines
Merged revisions 309251 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding the setvar option with variable substitution on the value allows things
like setting the outbound caller id name to the summary of a calendar event,
etc. Values could be chained together as they are appended in order to do some
scripting if necessary.
Review: https://reviewboard.asterisk.org/r/1134/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309035 | tilghman | 2011-02-28 05:10:28 -0600 (Mon, 28 Feb 2011) | 15 lines
Merged revisions 309033-309034 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309033 | tilghman | 2011-02-28 04:43:12 -0600 (Mon, 28 Feb 2011) | 4 lines
A later version of flex already includes the fwrite workaround code, which if used twice causes a compilation error.
Detect whether Flex will compile without the workaround; if so, suppress our workaround code.
........
r309034 | tilghman | 2011-02-28 05:07:52 -0600 (Mon, 28 Feb 2011) | 2 lines
Clarify meaning, removing double negative (stupid!)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The nativeformats field was being overwritten when it should have been
appended too. This caused some format capabilities to be lost briefly and
some log warnings to be output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r304950 | tilghman | 2011-01-31 00:41:36 -0600 (Mon, 31 Jan 2011) | 18 lines
Change mutex tracking so that it only consumes memory in the core mutex object when it's actually being used.
This reduces the overall size of a mutex which was 3016 bytes before this back
down to 216 bytes (this is on 64-bit Linux with a glibc-implemented mutex).
The exactness of the numbers here may vary slightly based upon how mutexes are
implemented on a platform, but the long and short of it is that prior to this
commit, chan_iax2 held down 98MB of memory on a 64-bit system for nothing more
than a table of 32767 locks. After this commit, the same table occupies a mere
7MB of memory.
(closes issue #18194)
Reported by: job
Patches:
20110124__issue18194.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/1066
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303549 | russell | 2011-01-24 14:51:37 -0600 (Mon, 24 Jan 2011) | 45 lines
Merged revisions 303548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
(closes issue #18585)
Reported by: oej
Tested by: oej, wedhorn, russell
Review: https://reviewboard.asterisk.org/r/1082/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
