The CHANNEL_DEADLOCK_AVOIDANCE() feature of preserving where the channel
lock was originally obtained is overkill where ast_channel_lock_both() was
inlined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Speech API apps return -1 on failure, which will hang up the channel. This
may not be desirable behavior for some, but it isn't something that can be
changed without breaking people's dialplans or writing an option to all of the
Speech apps that does what TryExec already does. This patch documents the
hangup behavior of the apps, and suggests TryExec as the solution.
(closes issue AST-813)
........
Merged revisions 362815 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362816 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362496 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When storing a voicemail message using an ODBC connection to a database, the
voicemail message is first stored on disk. The sound file associated with
the message is read into memory before being transmitted to the database.
When this occurs, a failure in the C library's lseek function would cause a
negative value to be passed to the mmap as the size of the memory map to
create. This would almost certainly cause the creation of the memory map to
fail, resulting in the message being lost.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863
........
Merged revisions 362201 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362202 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, ForkCDR's e option would immediately set the end time of the forked
CDR to that of the CDR that is being terminated. This resulted in the new CDR's end time
being roughly the same as it's beginning time (which is in turn roughly the same as the
original's end time).
(closes issue ASTERISK-19164)
Reported by: Steve Davies
Patches:
cdr_fork_end.v10.patch uploaded by Steve Davies (license 5012)
........
Merged revisions 362082 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362084 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A memory leak/reference counting leak occurs if the MeetMeAdmin 'e' command
(eject last user that joined) is used in conjunction with a specified user.
Regardless of the command being executed, if a user is specified for the
command, MeetMeAdmin will look up that user. Because the 'e' option kicks
the last user that joined, as opposed to the one specified, the reference to
the user specified by the command would be leaked when the user variable
was assigned to the last user that joined.
........
Merged revisions 361558 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 361560 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Echo()'s description states that it echoes audio, video, and DTMF except for #
while it actually echoes any frame that it receives other than DTMF #. This
was causing frame storms in the test suite in some circumstances where Echo()
was attached to both ends of a pair of local channels and control frames
were being periodically generated. Echo()'s behavior and description have
been modifed so that it only echoes media and non-# DTMF frames.
........
Merged revisions 360033 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360034 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Milliwatt is vulnerable to a remotely exploitable stack overrun when using
the 'o' option. This occurs due to the milliwatt_generate function not
accounting for AST_FRIENDLY_OFFSET when calculating the maximum number of
samples it can put in the output buffer.
This patch resolves this issue by taking into account AST_FRIENDLY_OFFSET
when determining the maximum number of samples allowed. Note that at no
point is remote code execution possible. The data that is written into the
buffer is the pre-defined Milliwatt data, and not custom data.
(closes issue ASTERISK-19541)
Reported by: Russell Bryant
Tested by: Matt Jordan
Patches:
milliwatt_stack_overrun.rev1.txt by Russell Bryant (license 6283)
Note that this patch was written by Russell, even though Matt uploaded it
........
Merged revisions 359645 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 359656 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359694 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line support was added, the wait_for_answer() variable
single changed its meaning slightly. Unfortunately, the places where
single was used did not necessarily get updated to reflect that change.
Also audio/video frames were sent to all forked calls when the endpoints
were never made compatible.
* Don't pass audio/video media frames when the channels have not been made
compatible.
* Added handling of AST_CONTROL_SRCCHANGE to app_dial.c.
* Fixed app_dial.c passing on AST_CONTROL_HOLD because that frame can also
pass a requested MOH class.
(closes issue ASTERISK-16901)
Reported by: Chris Gentle
(closes issue ASTERISK-17541)
Reported by: clint
Review: https://reviewboard.asterisk.org/r/1805/
........
Merged revisions 359344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359355 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change restores functionality that was present in 1.4, when AEL macros
were implemented with the Macro dialplan application. Macros are fraught with
functionality issues, because they consume a large portion of the underlying
application stack. This limits the ability of AEL users to call many layers
of subroutines, an issue which Gosub does not have (originally tested to
100,000 levels deep). Therefore, starting in 1.6.0, AEL macros were
implemented with Gosub.
However, there were some implicit behaviors of Macro, which were not replicated
at the same time as with the transition to Gosub, one of which is documented in
the related issue. In particular, the "h" extension is designed to execute not
in the Macro context, but in the topmost calling context. Due to legacy issues
with a misapplied bugfix many years ago, when a macro exited in 1.4, it looks
in all calling contexts, bubbling up from the deepest level until it finds an
"h" extension.
Since AEL hides the complexity of the underlying dialplan logic from the AEL
programmer, it's reasonable to assume that this behavior should not change in
the transition from Asterisk 1.4 LTS to Asterisk 1.8 LTS, lest we break
working AEL configurations in the transition to Asterisk 1.8 LTS. This fix
is the result, which implements a search for the "h" extension in all calling
Gosub contexts.
Fixes ASTERISK-19336
Patch: 20120308__ael_bugfix_for_trunk__2.diff (License #5003) by Tilghman Lesher
(with slight modifications for 1.8)
Tested by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1776/
........
Merged revisions 358810 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358811 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This should (and does in my testing) act just like the Dial option of the same name.
This allows a queue member to be transfered to the next priority (no args), or to
a context/extension/priority similar to goto (with args context^extension^priority)
when a caller hangs up on them.
(closes issue ASTERISK-19283)
Reported by: To
Patches:
queue_f-v3.diff uploaded by To (license 6347)
Review: https://reviewboard.asterisk.org/r/1785/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the stack frame is allocated, we save the address to which we should
return, when the Gosub returns. However, if we just want to restore the
priority, then we need to subtract 1 before setting it. Otherwise, when
a Gosub goes to a nonexistent address, it will skip a priority in the
dialplan. This is because when we return from an application, the PBX
increments the priority for us.
........
Merged revisions 357416 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357421 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
