hints would reflect the line still on hold, even though it should reflect that
it is back to not in use. (issue #9459, reported by francesco_r, fixed by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@60069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59360 | file | 2007-03-29 13:33:58 -0400 (Thu, 29 Mar 2007) | 2 lines
Keep a global array of variables indicating whether certain conference rooms are in use. This ensures that two people going into a new dynamic conference when the 'e' option is set don't go into the same conference room. (issue #8835 reported by eliel)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@59361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it is known to not work properly in some situations. However, add an option to
enable it for those that would like to use it anyway.
The short story behind this is that to properly handle CallerID with SLA, we
need the ability to change the CallerID on an existing call, and we are not
ready to handle that.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@58894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
avoid a race condition. Also, if the station originated the call that it is
putting on hold, don't hang up the trunk if it was the only station on the call
and it is hanging up due to hold and not a normal hangup.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@58512 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Originally, I put in the documentation that only Zap interfaces would be
supported on the trunk side. However, after a discussion with Qwell, we came
up with a way to make IP trunks work as well, using some things already in
Asterisk. So, here it is, this now officially supports IP trunks.
* Update the SLA documentation to reflect how to setup IP trunks.
* Add a section in sla.txt that describes how to set up an SLA system with
voicemail.
* Simplify the way DTMF passthrough is handled in MeetMe.
* Fix a bug that exposed itself when using a Local channel on the trunk side
in SLA. The station's channel needs to be passed to the dial API when
dialing the trunk.
* Change a WARNING message to DEBUG in channel.h. This message is of no use
to users.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@57364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add support for private hold. By setting "hold=private" for a trunk, only
the station that put the call on hold will be able to retrieve it from hold.
Also, by setting "hold=private" for a station, any call that station puts
on hold can only be retrieved by that station.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@57203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add support for the "barge=no" option for trunks. If this option is set,
then stations will not be able to join in on a call that is on progress
on this trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@57144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add support for station ring delays. Ring delays can be set globally for a
station or for specific trunks on the station.
* Fix a few bugs in existing code.
* Restructure and Reorganize code to improve readability and maintainability.
* Improve formatting of the "sla show (trunks|stations)" CLI commands.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@57089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This batch of changes to the SLA code does a few different things.
* I made the SLA code event driven instead of having to act in a lot of busy
loops while dialing things to wait for state changes. This makes the code
more efficient and readable at the same time.
* I have implemented a couple of new features. The first is inbound trunk
ringing timeouts. This is an option that defines how long to let an incoming
call on a trunk to ring.
* I have also implemented ring timeouts for stations. They may be specified
for the entire station, meaning it is how long to let the station ring before
giving up. You can also specify a ring timeout for a specific trunk on a
station. So, you can say that you only want a specific station to ring 5
seconds if it is line1 ringing, but otherwise, there is no timeout.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@56277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r55005 | russell | 2007-02-16 16:48:22 -0600 (Fri, 16 Feb 2007) | 9 lines
Revert the change I did in revisions 54955, 54969, and 54970, in 1.2, 1.4,
and trunk. I decided that once a conference is created from meetme.conf,
it is acceptable behavior that the pin can not be changed until the
conference goes away. I also added a note in meetme.conf to describe this
behavior.
We still have another issue in 1.4 and trunk where some conferences with no
users don't go away. That is the real bug that needs to be addressed here.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@55006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r54955 | russell | 2007-02-16 14:56:58 -0600 (Fri, 16 Feb 2007) | 5 lines
For conferences that are configured in meetme.conf, check the configuration
file every time someone joins the conference instead of only when the
conference is first created. This is to ensure that changes to the pin
numbers in the config file are always honored. (issue #9073)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@54969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@53810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@44378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r42783 | tilghman | 2006-09-11 16:47:23 -0500 (Mon, 11 Sep 2006) | 4 lines
When paging, only wait 5 seconds for the marked user to enter the conference.
After that, assume the paging already completed by the time the channel entered
the conference and drop back out. (Issue 7275)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@42788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
