Parking typically occurs when a channel is transferred to a parking extension.
When this occurs, the channel never actually hits the dialplan if the extension
it was transferred to was a "parking extension", that is, the extension in
the first priority calls the Park application. Instead, the channel is
immediately sent into the holding bridge acting as the parking bridge.
This is problematic.
Because we never go out to the dialplan, the CDRs won't transition properly
and the application field will not be set to "Park". CDRs typically swallow
holding bridges, so the CDR itself won't even be generated.
This patch handles this by pulling out the holding bridge handling into its
own CDR state. CDRs now have an explicit parking state that accounts for this
specific subclass of the holding bridge. In addition, we handle the parking
stasis message to set application specific data on the CDR such that the
last known application for the CDR properly reflects "Park".
This is a bit sad since we're working around the odd internal implementation
of parking that exists in Asterisk (and that we had to maintain in order to
continue to meet some odd use cases of parking), but at least the code to
handle that is where it belongs: in CDRs as opposed to sprinkled liberally
throughout the codebase.
This patch also properly clears the OUTBOUND channel flag from a channel when
it leaves a bridge, and tweaks up dialing handling to properly compare the
correct CDR with the channel calling/being dialed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix locking problems. ast_bridge_move() locks two bridges. To do that,
deadlock avoidance must be done. Called bridge_move_locked() instead.
* Fix inconsistency in the bridge dissolve check callers. The original
caller has already removed the channel from the bridge. The new caller
has not removed the channel from the bridge. Reverted
bridge_dissolve_check() and added bridge_dissolve_check_stolen() to be
used by the new caller on the original bridge after the channel is moved
to the new bridge.
* Fix memory leak of features if the added channel was already in a
bridge.
* Fix incorrect call to ast_bridge_impart().
* Renamed bridge_chan to yanked_chan.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Extract a useful routine from the softmix bridge technology for other
technologies. Make other technologies use it if they can.
* Made native and 1-1 bridges write to all parties if the bridge channel
writing the frame into the bridge is NULL. Softmix will also do the same
for frame types that make sense.
* Tweak the bridge write routine return value meaning and adjust the
bridge technologies to match.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridge snapshot events were missing some important transitions that
were noticed in subsequent snapshots. Snapshots will now be published
on all bridge reconfigurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added a start technology callback that technologies can use to start
bridging operations. It is expected that native bridges will find this
useful.
* Factored out bridge_channel_complete_join().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A three party bridge uses the softmix bridging technology. This
technology has a dedicated thread used to perform the analog mixing. When
one of these parties leaves the bridge, the bridge technology is changed
from the softmix technology to a two-party mixing technology. Changing
technologies is done by removing channels from the old technology and
adding them to the new technology. Since the remaining channels do not
leave the bridge, the softmix mixing thread could continue to process all
channels in the bridge. If the bridge code is not able to start
destruction of the softmix technology before the softmix mixing thread
wakes up, a crash happens.
* Added a stop technology callback that technologies can use to request
any helper threads to stop in preparation for being destroyed.
(closes issue AST-1156)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis cache clear message payloads now consist of a stasis_message
representative of the message to be cleared from the cache. This allows
multiple parallel caches to coexist and be cleared properly by the same
cache clear message even when keyed on different fields.
This change fixes a bug where multiple cache clears could be posted for
channels. The cache clear is now produced in the destructor instead of
ast_hangup.
Additionally, dummy channels are no longer capable of producing channel
snapshots.
Review: https://reviewboard.asterisk.org/r/2596
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix external attended transfer bridge move/swap method. One of the
transferrer channels was not kicked out of the bridge.
* Fix several off-nominal extended attended transfer paths. Mainly the
channels involved needed to be hung up or kicked out of the bridge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is used to make bridge hook removal more generic. This way,
depending on the circumstance, the appropriate bridge hooks may be
removed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* DTMF attended and blind transfers have hold/unhold behavior restored.
* External attended and blind transfers unhold the transfered party when
the transfer is initiated.
* Made prohibit blind transferring a bridge marked as masquerade only.
(ConfBridge bridges)
* Made running an application or playing a file inside a bridge post the
hold/unhold messages if MOH is requested.
Review: https://reviewboard.asterisk.org/r/2574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Review: https://reviewboard.asterisk.org/r/2562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made multiplexed_bridge_destroy() check if anything to destroy and
cleared bridge_pvt pointer after destruction.
* Made multiplexed_add_or_remove() handling of the chans array simpler.
* Extracted bridge_channel_poke().
* Simplified bridge_array_remove() handling of the bridge->array[]. The
array does not have a NULL sentinel pointer.
* Made ast_bridge_new() not create a temporary bridge just to see if it
can be done. Only need to check if there is an appropriate bridge tech
available.
* Made ast_bridge_new() clean up on allocation failures.
* Made destroy_bridge() free resources in the opposite order of creation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds call ID logging changes to specific channel drivers that weren't handled
handled in phase II of Call ID Logging. Also covers logging for threads for
threads created by systems that may be involved with many different calls.
Extra special thanks to Richard for rigorous review of chan_dahdi and its
various signalling modules.
review: https://reviewboard.asterisk.org/r/1927/
review: https://reviewboard.asterisk.org/r/1950/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses two issues in ConfBridge and the channel bridge layer:
1. It fixes a race condition wherein the bridge channel could be hung up
2. It removes the deadlock avoidance from the bridging layer and makes the
bridge_pvt an ao2 ref counted object
Patch by David Vossel (mjordan was merely the commit monkey)
(issue ASTERISK-18988)
(closes issue ASTERISK-18885)
Reported by: Dmitry Melekhov
Tested by: Matt Jordan
Patches: chan_bridge_cleanup_v.diff uploaded by David Vossel (license 5628)
(closes issue ASTERISK-19100)
Reported by: Matt Jordan
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1654/
........
Merged revisions 350550 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
