https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275773 | jpeeler | 2010-07-12 15:34:51 -0500 (Mon, 12 Jul 2010) | 12 lines
Make user removals and traversals thread safe in meetme.
Race conditions present in meetme involving the user list where a lack of
locking has the potential for a user to be removed during a traversal or as in
the case of the reporter after checking if the list is empty could cause a
crash. Fixing this was done by convering the userlist to an ao2 container.
(closes issue #17390)
Reported by: Vince
Review: https://reviewboard.asterisk.org/r/746/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273474 | jpeeler | 2010-07-01 15:19:16 -0500 (Thu, 01 Jul 2010) | 14 lines
Allow admin user to join conference without using admin mode and no user pin.
Configuring the conference in meetme.conf like the following:
conf => 2345,,6666
did not prompt for pin when used without admin mode. This meant that the
conference could not be joined as an admin even if the user knew the correct
pin. The original bug report was submitted claiming that the blank user pin
should deny entry into the conference. I think a better way to handle this
would be with a feature enhancement that used the following syntax:
conf => 2345,X,6666 - where X denotes no acceptable pin allowed
(closes issue #15704)
Reported by: modelnine
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273354 | jpeeler | 2010-07-01 10:05:43 -0500 (Thu, 01 Jul 2010) | 12 lines
Ensure channel placed in meetme in ringing state is properly hung up.
An outgoing channel placed in meetme while still ringing which was then hung up
would not exit meetme and the channel was not properly destroyed. Specifically
checking for this scenario by looking at the appropriate control frames resolves
the issue.
(closes issue #15871)
Reported by: Ivan
Patches:
meetme_congestion_trunk_v2.patch uploaded by Ivan (license 229)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r272255 | pabelanger | 2010-06-23 16:57:01 -0400 (Wed, 23 Jun 2010) | 12 lines
First caller into a dynamic conference now enter pin once.
If MeetMe is configured to use dynamic conference
numbers, then the first caller (which creates the
conference) had to enter the PIN number twice.
(closes issue #15878)
Reported by: shawkris
Patches:
issue15878.patch uploaded by pabelanger (license 224)
Tested by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Even if there are no stations or trunks defined, we need to start the sla
thread to make sure we get the reload event. Also, when doing a reload we need
to remove the existing trunks and stations or they end up hanging around.
(closes issue #16818)
Reported by: mbonin
Patches:
sla_reload.patch uploaded by twilson (license 396)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r262662 | dvossel | 2010-05-12 12:00:04 -0500 (Wed, 12 May 2010) | 11 lines
fixes app_meetme dsp error
We attempted to detect silence after translating a frame
from signed linear. This caused a flooding of errors. To
resolve this the code to detect silence was moved before the
translation.
(closes issue #17133)
Reported by: jsdyer
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following in-conference admin DTMF features:
*81 - Roll call (or simply user count if INTROUSER isn't enabled)
*82 - Eject all non-admins
*83 - Mute/unmute all non-admins
*84 - Start recording the conference on the fly
FWIW, this code uses newly recorded prompts.
(closes issue #16379)
Reported by: rfinnie
Patches:
meetme-enhancements-232771-v1.patch uploaded by rfinnie (license 940)
modified slightly by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236509 | seanbright | 2009-12-28 07:43:36 -0500 (Mon, 28 Dec 2009) | 12 lines
Avoid a crash with large numbers of MeetMe conferences.
Similar to changes made to Queue(), when we have large numbers of conferences in
meetme.conf (1000s) and we use alloca()/strdupa(), we can blow out the stack and
crash, so instead just use a single fixed buffer.
(closes issue #16509)
Reported by: Kashif Raza
Patches:
20091223_16509.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r234379 | jpeeler | 2009-12-11 16:37:21 -0600 (Fri, 11 Dec 2009) | 11 lines
Fix talking detection status after conference user is muted.
This patch ensures that when a conference user is muted that the accompanying
AMI Meetme talking off event is sent. Also, the meetme list output is updated
to show the muted user as unmonitored.
(closes issue #16247)
Reported by: dimas
Patches:
v3-16247.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As described in the CHANGES file:
* MeetMe has a new option 'G' to play an announcement before joining a
conference.
* Page has a new option 'A(x)' which will playback an announcement
simultaneously to all paged phones (and optionally excluding the caller's one
using the new option 'n') before the call is bridged.
To add the new option to meetme, the conference flag options had to be extended
to 64 bits.
(closes issue #14365)
Reported by: dferrer
Patches:
page_announce.patch uploaded by dferrer (license 525)
modified by me
Review: https://reviewboard.asterisk.org/r/188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r217156 | tilghman | 2009-09-08 15:01:45 -0500 (Tue, 08 Sep 2009) | 7 lines
When MOH is playing on the channel, announcements sent through the conference are not heard.
(closes issue #14588)
Reported by: voipas
Patches:
20090716__issue14588__2.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen, twisted, tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move function MEETME_INFO static documentation to the new AstXML form.
(issue #15245)
Reported by: eliel
Patches:
app_meetme_static_conversion.txt uploaded by lmadsen (license 10)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A new xml element was created to manage the AMI actions documentation,
using AstXML.
To register a manager action using XML documentation it is now possible
using ast_manager_register_xml().
The CLI command 'manager show command' can be used to show the parsed
documentation.
Example manager xml documentation:
<manager name="ami action name" language="en_US">
<synopsis>
AMI action synopsis.
</synopsis>
<syntax>
<xi:include xpointer="xpointer(...)" /> <-- for ActionID
<parameter name="header1" required="true">
<para>Description</para>
</parameter>
...
</syntax>
<description>
<para>AMI action description</para>
</description>
<see-also>
...
</see-also>
</manager>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When app_meetme finds a realtime conference, it doesn't get the filename and fileformat correctly when 'r' is set. Now app_meetme first checks to see if fileformat and filename are declared in the db, if they're not it checks the .conf file, if its not declared there either it then uses defaults.
(closes issue #14545)
Reported by: dalbaech
Patches:
app_meetme-realtime5.patch uploaded by dvossel (license 671)
Realtime_Conference_Record_workaround.txt uploaded by dalbaech (license 705)
Tested by: dvossel, dalbaech
Review: http://reviewboard.digium.com/r/180/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179972 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179532 | russell | 2009-03-02 17:34:13 -0600 (Mon, 02 Mar 2009) | 40 lines
Move ast_waitfor() down to avoid the results of the API call becoming stale.
This call to ast_waitfor() was being done way too soon in this section of code.
Specifically, there was code in between the call to waitfor and the code that
uses the result that puts the channel in autoservice. By putting the channel
in autoservice, the previous results of ast_waitfor() become meaningless,
as the autoservice thread will do it's own ast_waitfor() and ast_read()
on the channel.
So, when we came back out of autoservice and eventually hit the block of code
that calls ast_read() on the channel, there may not actually be any input on
the channel available. Even though the previous call to ast_waitfor() in
app_meetme said there was input, the autoservice thread has since serviced
the channel for some period of time.
This bug manifested itself while dvossel was doing some testing of MeetMe in
Asterisk trunk. He was using the timerfd timing module. When the code hit
ast_read() erroneously, it determined that it must have been called because of
input on the timer fd, as chan->fdno was set to AST_TIMING_FD, since that was
the cause of the last legitimate call to ast_read() done by autoservice.
In this test, an IAX2 channel was calling into the MeetMe conference. It was
_much_ more likely to be seen with an IAX2 channel because of the way audio
is handled. Every audio frame that comes in results in a call to
ast_queue_frame(), which then uses ast_timer_enable_continuous() to notify
the channel thread that a frame is waiting to be handled. So, the chances
of ast_waitfor() indicating that a channel needs servicing due to a timer
event on an IAX2 event is very high.
Finally, it is interesting to note that if a different timing interface was
being used, this bug would probably not be noticed. When ast_read() is called
and erroneously thinks that there is a timer event to handle, it calls the
ast_timer_ack() function. The pthread and dahdi timing modules handle the
ack() function being called when there is no event by simply ignoring it.
In the case of the timerfd module, it results in a read() on the timer fd
that will block forever, as there is no data to read. This caused Asterisk
to lock up very quickly.
Thanks to dvossel and mmichelson for the fun debugging session. :-)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179533 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Enabling this option by default proved to be a bad idea, as the talker detection
is not very reliable. So, make it optional again, and off by default.
(issue #13801)
Reported by: justdave
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176249 | mmichelson | 2009-02-16 15:34:27 -0600 (Mon, 16 Feb 2009) | 14 lines
Open the DAHDI pseudo device and set it to be nonblocking atomically
Apparently on FreeBSD, attempting to set the O_NONBLOCKING flag separately
from opening the file was causing an "inappropriate ioctl for device" error.
While I cannot fathom why this would be happening, I certainly am not opposed
to making the code a bit more compact/efficient if it also fixes a bug.
(closes issue #14482)
Reported by: ys
Patches:
meetme.patch uploaded by ys (license 281)
Tested by: ys
........
r176252 | mmichelson | 2009-02-16 15:39:21 -0600 (Mon, 16 Feb 2009) | 3 lines
Remove unused variable and make dev-mode compilation happy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r170147 | file | 2009-01-22 12:50:54 -0400 (Thu, 22 Jan 2009) | 4 lines
If we are unable to request a DAHDI pseudo channel and we are using the user introduction without review option make sure it gets unset so other code does not blindly assume a DAHDI pseudo channel exists.
(closes issue #14282)
Reported by: cheesegrits
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@170148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
