When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the "h" extension is present within the context of the queue, all calls
are being reported COMPLETECALLER even when the agent is hanging up the call.
This patch checks to see if the agent hung-up or not instead of only relying on
checking if the queue (caller) channel hung-up or not. It would appear that
having the h extension in the mix, the pbx goes to the h extension,
"hanging-up" the queue channel and triggering the reporting of COMPLETECALLER.
(closes issue ASTERISK-20743)
Reported by: call
Tested by: call, Michael L. Young
Patches:
asterisk-20743-q-cmplt-caller.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2256/
........
Merged revisions 378514 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378515 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the option ringinuse=no set, the patch committed for ASTERISK-16115
causes non-SIP queue members to never be called because the device state
is checked after a channel is created to determine if the member is busy.
These queue members always get the "Member %s is busy, cannot dial"
message.
Most channel drivers other than chan_sip use the default device state
handling. The default device-state state is considered in use or unknown
if the channel exists or not respectively.
(closes issue ASTERISK-20801)
Reported by: rmudgett
Patches:
jira_asterisk_16115_revert_r370418_v1.8.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 378036 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378037 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When two users entered a new conference simultaneously, one of the callers
hears MOH. This happened if two unmarked users entered simultaneously and
also if a waitmarked and a marked user entered simultaneously.
* Created a confbridge internal MOH API to eliminate the inlined MOH
handling code. Note that the conference mixing bridge needs to be locked
when actually starting/stopping MOH because there is a small window
between the conference join unsuspend MOH and actually joining the mixing
bridge.
* Created the concept of suspended MOH so it can be interrupted while
conference join announcements to the user and DTMF features can operate.
* Suspend any MOH until the user is about to actually join the mixing
bridge of the conference. This way any pre-join file playback does not
need to worry about MOH.
* Made post-join actions only play deferred entry announcement files.
Changing the user/conference state during that time is not protected or
controlled by the state machine.
(closes issue ASTERISK-20606)
Reported by: Eugenia Belova
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2232/
........
Merged revisions 377992 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@377993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made destroy_conference_bridge() destroy a missed ast_mutex_t and ast_cond_t.
* Made join_conference_bridge() init the ast_mutex_t's and ast_cond_t so
destroy_conference_bridge() can destroy them unconditionally.
* Made join_conference_bridge() abort if the new conference could not be
added to the conferences container.
* Made leave_conference() discard any post-join actions if
join_conference_bridge() had to abort early.
* Made the join_conference_bridge() diagnostic messages better describe
what happened.
* Renamed leave_conference_bridge() to leave_conference() and made it only
take a conference user pointer. The conference pointer was redundant.
* Made conf_bridge_profile_copy() use struct copy instead of memcpy().
* No need to lock the conference in start_conf_record_thread() since all
of the callers already have it locked.
........
Merged revisions 377354 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@377355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made func_confbridge_helper() allow an empty value when setting options.
You previously could not Set(CONFBRIDGE(user,pin)=) and clear the
configured pin from the dialplan.
* Made func_confbridge_helper() handle its datastore better if multiple
threads attempt to set the first CONFBRIDGE option value on the channel.
* Made the func_confbridge_helper() only output one diagnostic message
concerning the option.
* Made the bridge video_mode able to repeatedly change in the config file
and CONFBRIDGE dialplan function. The video_mode option values are an
enum and not independent of each other.
* Made handle_cli_confbridge_show_bridge_profile() better handle the
video_mode option.
* Simplified datastore handling code in conf_find_user_profile() and
conf_find_bridge_profile().
(closes issue ASTERISK-20655)
Reported by: Birger "WIMPy" Harzenetter
........
Merged revisions 377227 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@377228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removed call to ast_module_user_hangup_all() in res_config_mysql.c since
it is effectively a noop. No channels can attach a reference to that
module.
* Removed call to ast_module_user_hangup_all() in app_celgenuserevent.c.
The caller of unload_module() has already called it.
* Removed redundant channel module references in pbx_dundi.c. The
registered dialplan function callback dispatchers for the read/read2/write
callbacks already reference the module before calling.
* pbx_dundi: Moved unregistering CLI commands, DUNDi switch, and dialplan
functions to the first thing the unload_module() does. This will reduce
the chance of new channels using DUNDi services while the module is being
torn down.
........
Merged revisions 376657 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376658 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376659 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a test event to ConfBridge that reports transitions between
states in ConfBridge. This is used by tests in the Asterisk Test Suite
that verify state changes based on the entering/leaving of conference
participants.
........
Merged revisions 376414 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channels would get stuck and MeetMe would repeatedly display an Unable
to write frame to channel error in the conf_run function if hung up
during certain sound prompts such as during user count announcements.
This patch fixes that by reintroducing a hangup check in the meetme's
main loop (also in conf_run).
(closes issue ASTERISK-20486)
Reported by: Michael Cargile
Review: https://reviewboard.asterisk.org/r/2187/
Patches:
meetme_hangup_patch_ASTERISK-20486_v3.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 376307 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376308 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We were attempting to play "vm-urgent-removed", which didn't exist. Now we play "vm-marked-nonurgent" which exists
and is the correct sound file. Previous behavior was silence and a warning on the CLI.
(issue ASTERISK-20280)
(closes issue ASTERISK-20280)
Reported by: Tomo Takebe
Tested by: Rusty Newton
Patches:
asterisk20280.patch uploaded by Rusty Newton (license 5829)
........
Merged revisions 376262 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376263 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When confbridge was changed to handle conference status with a state machine in
r374658. The function responsible for starting recording for a conference was
refactored with the function actually responsible for launching the recording
thread being split into a function with another name. The old function name was
still used for manually started recordings through AMI or CLI. This patch fixes
that by switching which function is used to start recording the conference.
(closes issue ASTERISK-20601)
Reported by: Vilius
Patches:
confbridge_mixmonitor.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 375470 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Review: https://reviewboard.asterisk.org/r/2161
........
Merged revisions 375025 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375026 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a format name was not found by ast_getformatbyname, a NULL pointer
would be passed into ast_format_rate and immediately dereferenced.
This ensures that a valid pointer is used since the structure is
already allocated on the stack.
(closes issue DPH-523)
Reported-by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Party A calls Party B
Party B puts Party A on hold.
Party B calls a queue.
Ringing queue member D sees Party B identification.
Party B transfers Party A to the queue.
Queue member D does not get a connected line update for Party A.
Queue member D answers the call and still sees Party B information.
However, if Party A later transfers the call to Party C then queue member
D gets a connected line update for Party C.
* Made pass connected line updates from the caller to queue members while
the queue members are ringing.
(closes issue AST-1017)
Reported by: Thomas Arimont
(closes issue ABE-2886)
Reported by: Thomas Arimont
Tested by: rmudgett
........
Merged revisions 374801 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 374802 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374803 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thank's to Neil Tallim (flan)'s tireless testing, issue reporting, and patches
it became clear that app_confbridge had some complex logic in how it handled
interactions between marked, waitmarked, and unmarked users. In particular,
there were some areas in which the interactions between the users resulted
in inconsistent behavior, and app_confbridge was missing logic in how to handle
some corner cases. Some areas included:
* Poor handling of mixing unmarked and waitmarked users
* Inconsistencies in how MOH and muting was applied to various users
* Handling of various announcements for different user profile options
flan's patches seem to fix the various issues, but highlighted how hard the
code could be to maintain. In an attempt to make things easier to maintain and
to more fully enumerate the various cases that exist, this patch breaks up the
logic into a state machine-like setup.
Please note that the various state transitioned are documented on the Asterisk
wiki:
https://wiki.asterisk.org/wiki/display/AST/Confbridge+state+changes
Review: //https://reviewboard.asterisk.org/r/2072/
Note that for the following issues, mjordan uploaded the patch, although it
was written by twilson. Any contributor license discrepency is due to that.
(closes issue ASTERISK-19562)
Reported by: flan
Tested by: flan, mjordan, jrose
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
(closes issue ASTERISK-19726)
Reported by: flan
Tested by: flan
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
(closes issue ASTERISK-20181)
Reported by: Jonathan White
Tested by: Jonathan White
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
........
Merged revisions 374652 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Review: https://reviewboard.asterisk.org/r/2136/
........
Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Not panicking means that the old config is kept.
(closes issue ASTERISK-20458)
Reported by: Leif Madsen
Patches:
ASTERISK-20458.patch uploaded by Mark Michelson(license #5049)
Tested by Leif Madsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix previously untested senarios;
1). On queue initialisation set queue_avail devstate to INUSE.
Previously was unavailable, which indicated an agent was available.
2). When removing members, if there are no other members available, set queue_avail to INUSE.
Previously, if a member interface had become 'unavailable', they were never going to be removed, particularly when persistant queues is enabled.
3). When adding a member, check that they are available, if they are set queue_avail to NOT_INUSE.
Previously on reloaded, members may have been 'unavailable'.
4). When pausing or unpausing a member, set appropriate queue availability.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2129/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the 'e' or 'E' option to MeetMe the configured conference bridges are loaded and examined to see
if any are empty. If no conference bridges are empty the caller is prompted to enter the number of one.
This operation left around a pointer to the last created conference bridge still containing participants.
When the caller that was not able to find any empty conference bridge hung up this pointer was disposed of
and the reference count of the conference bridge decremented. If there was only a single participant in the
conference bridge it was ultimately destroyed prematurely.
(closes issue AST-994)
Reported by: John Bigelow
........
Merged revisions 373242 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373245 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373246 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
~~~~
Support all ways a member can be available for 'agent available' hints
Alec's patch in r373188 added the ability to subscribe to a hint for when
Queue members are available. This patch modifies the check that determines
when a Queue member is available by refactoring the availability checks in
num_available_members into a shared function is_member_available. This
should now handle the ringinuse option, as well as device state values
other than AST_DEVICE_NOT_INUSE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for hints on a queue. Hints can be added using
the nomenclature 'Queue:name', where name is the name of the queue being
monitored.
This nifty feature was done by Alec Davis.
Review: https://reviewboard.asterisk.org/r/1619
Reported by: Alec Davis
Tested by: alecdavis
patches:
review1619.diff2 by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* ASTERISK-20383
Missing named call pickup group features:
CHANNEL(callgroup) - Need CHANNEL(namedcallgroup)
CHANNEL(pickupgroup) - Need CHANNEL(namedpickupgroup)
Pickup() - Needs to also select from named pickup groups.
* ASTERISK-20384
Using the pickupexten, the pickup channel selection could fail even though
there was a call it could have picked up. In a call pickup race when
there are multiple calls to pickup and two extensions try to pickup a
call, it is conceivable that the loser will not pick up any call even
though it could have picked up the next oldest matching call.
Regression because of the named call pickup group feature.
* See ASTERISK-20386 for the implementation improvements. These are the
changes in channel.c and channel.h.
* Fixed some locking issues in CHANNEL().
(closes issue ASTERISK-20383)
Reported by: rmudgett
(closes issue ASTERISK-20384)
Reported by: rmudgett
(closes issue ASTERISK-20386)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2112/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI action VoicemailUsersList VoicemailUserEntry event headers
ServerEmail and MailCommand did not report the global values if they were
not overridden. The VoicemailUserEntry event header ServerEmail was not
populated with the global value if the voicemail user did not override it.
The VoicemailUserEntry event header MailCommand was never populated with a
value.
* Removed unused struct ast_vm_user member mailcmd[].
(closes issue AST-973)
Reported by: John Bigelow
Tested by: rmudgett
........
Merged revisions 372620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372621 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When MiniVM sends an e-mail and it has the volgain option set, it will spawn
sox in a separate process to handle the manipulation of the sound file. In
doing so, it creates a temporary file. There are two problems here:
1) The file descriptor returned from mkstemp is leaked
2) The finalfilename character pointer points to a buffer that loses scope
once volgain processing is finished.
Note that in r316265, Russell fixed some gcc warnings by using the return
value of the mkstemp call. A warning was placed in minivm that the file
descriptor was going to be leaked. This patch reverts that change, as it
handles the leak and 'uses' the file descriptor returned from mkstemp.
(closes issue ASTERISK-17133)
Reported by: Tzafrir Cohen
patches:
minivm_18501_demo.diff uploaded by Tzafrir Cohen (license #5035)
........
Merged revisions 372554 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372555 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Status: header in a QueueMemberStatus event (and other QueueMember* events)
is the numeric value of the device state corresponding to that Queue Member.
As those values are not exactly obvious, listing them in the documentation is
useful.
Matt Riddell reported this indirectly through the wiki page.
(closes issue ASTERISK-20243)
Reported by: Matt Riddell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using tab-completion for the list of queues on "queue reset stats"
or "queue reload {all|members|parameters|rules}", the tab-completion
listing for further queues erroneously listed queues that had already
been added to the list. The tab-completion listing now only displays
queues that are not already in the list.
(closes issue AST-963)
Reported-by: John Bigelow
........
Merged revisions 372517 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372518 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, tabbing at the end of "queue show" produced a list of
available queues about which information could be shown, but did not
include an alternative command, "rules", to access information about
queue rules. The "rules" item should now be shown in the list of
tab-completable items.
(closes issue AST-958)
Reported-by: John Bigelow
........
Merged revisions 372444 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372445 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When parsing a 'number' defined in followme.conf, FollowMe previously parsed
the number in the configuration file into a buffer with a length of 90
characters. This can artificially limit some parallel dial scenarios. This
patch allows for numbers of any length to be defined in the configuration
file.
Note that Clod Patry originally wrote a patch to fix this problem and received
a Ship It! on the JIRA issue. The patch originally expanded the buffer to 256
characters. Instead, the patch being committed duplicates the string in the
config file on the stack before parsing it for consumption by the application.
(closes issue ASTERISK-16879)
Reported by: Clod Patry
Tested by: mjordan
patches:
followme_no_limit.diff uploaded by Clod Patry (license #5138)
Slightly modified for this commit.
........
Merged revisions 372390 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372391 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
1. When find_user is called with NULL as its first parameter, the voicemail
user returned is allocated on the heap. The inboxcount2 function uses
find_user in such a fashion when counting new messages, and fails to free
the resulting voicemail user object.
2. When populate_defaults is called on a voicemail user, it wipes whatever
flags have been set on the object by copying over the global flags object.
If the VM_ALLOCED flag was ste on the voicemail user prior to doing so,
that flag is removed. This leaks the voicemail user when free_user is later
called.
(closes issue ASTERISK-19155)
Reported by: Filip Jenicek
patches:
asterisk.patch2 uploaded by Filip Jenicek (license 6277)
Patch slightly modified for this commit.
Review: https://reviewboard.asterisk.org/r/2096
........
Merged revisions 372268 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372288 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When app_queue is unloaded, the queues container has its refcount
decremented, potentially to 0. Then the taskprocessor responsible
for handling device state changes is unreferenced. If the
taskprocessor happens to be just about to run its task, then it
will create and destroy an iterator on the queues container.
This can cause the refcount on the queues container to increase to
1 and then back to 0. Going back to 0 a second time results in
double frees.
This failure was seen periodically in the testsuite when Asterisk
would shut down.
........
Merged revisions 372089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372090 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Queue member status would not always get updated properly when the member
was called, thus resulting in the member getting multiple calls. With this
change, we update the member's status at the time of calling, and we also
check to make sure the member is still available to take the call before
placing an outbound call.
(closes issue ASTERISK-16115)
reported by nik600
Patches:
app_queue.c-svn-r370418.patch uploaded by Italo Rossi (license #6409)
........
Merged revisions 372048 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372049 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
