The system header strings was included mistakenly with commit 3de0204.
That header is included via asterisk.h and there via the compat.h.
Change-Id: I3dc49060e275295f785670c87cc65fd3c3abd24a
Instead of looking for pass-through formats in the list of transcodable
formats (which is going to find nothing), go through the result which
is going to be the jointcaps of the tech_pvt of the channel. Finally,
only with that list, ast_format_cap_remove(.) is going to succeed.
This restores the behaviour of Asterisk 1.8. However, it does not fix
ASTERISK_29282 because that issue report is about chan_sip and PJSIP.
Here, only chan_sip is fixed because PJSIP does not even call
ast_rtp_instance_available_formats -> ast_translate_available_format.
Change-Id: Icade2366ac2b82935b95a9981678c987da2e8c34
Two previous commits, 620d9f4 and 6d980de, allow to set up a call
without audio, again. That was introduced originally with commit f04d5fb
but changed and broke over time. The original commit missed one
scenario: A [peer] section in sip.conf, which does not allow audio at
all. In that case, chan_sip rejected the call, although even when the
requester offered no audio. Now, chan_sip does not check whether there
is no audio format but checks whether there is no format in general. In
other words, if there is at least one format to offer, the call succeeds.
However, to prevent calls with no-audio, chan_sip still rejects calls
when both call parties (caller = requester of the call *and* callee =
[peer] section in sip.conf) included audio. In such a case, it is
expected that the call should have audio.
ASTERISK-29280
Change-Id: I0fb74faf51ef22a60c10b467df6a4d1c1943b73e
If there's no secret specified for an iax2 peer and there's no secret
specified in the dial string, Asterisk will crash if the auth method
requested by the peer is MD5 or plaintext. You also couldn't specify
a default auth method in the [general] section of iax.conf so if you
don't have static peers defined and just use the dial string, Asterisk
will still crash even if you have a secret specified in the dial string.
* Added logic to iax2_call() and authenticate_reply() to print
a warning and hanhup the call if encryption is requested and
there's no secret or auth method. This prevents the crash.
* Added the ability to specify a default "auth" in the [general]
section of iax.conf.
ASTERISK-29624
Reported by: N A
Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254
The previous commit 6d980de fixed this issue in the core of Asterisk.
With that, each channel technology can be used without audio
theoretically. Practically, the channel-technology driver chan_sip
turned out to have an invalid check preventing that. chan_sip tested
whether there is at least one audio format. However, chan_sip has to
test whether there is at least one format. More cannot be tested while
requesting chan_sip because only the [general] capabilities but not the
[peer] caps are known yet. And the [peer] caps might not be a subset or
show any intersection with the [general] caps. This change here fixes
this.
The original commit f04d5fb, thirteen years ago, contained a software
bug as it passed ANY audio capability to the channel-technology driver.
Instead, it should have passed NO audio format. Therefore, this
addressed issue here was not noticed in Asterisk 1.6.x and Asterisk 1.8.
Then, Asterisk 10 changed that from ANY to NO, but nobody reported since
then.
ASTERISK-29265
Change-Id: Ic16a3bf13cd1b5c4fc4041ed74961177d96b600f
When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is
0 when no protocl specific error
SIP example of failure, 3xx-6xx for the SIP error code received
This allows applications to perform actions based on the failure
reason.
ASTERISK-29252 #close
Reported-by: Dan Cropp
Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4
This completes the fix for ASTERISK_24543. Only when the call is an
outgoing call, consult and append the configured format capabilities
(p->caps). When all audio formats got rejected the negotiated format
capabilities (p->jointcaps) contain no audio formats for incoming
calls. This is required when there are other accepted media streams.
ASTERISK-29258
Change-Id: I8bab31c7f3f3700dce204b429ad238a524efebb9
There are a couple of parameters (datalen and data) that do not get set
in chan_pjsip_indicate which could cause an Invalid message to pop up
for things such as fax. This patch adds them to the frame.
Change-Id: Ia51be086a0708be905e73d1f433572c49c7e38f8
Previously, chan_sip parsed all known media streams in an SDP offer
like video (and text) even when videosupport=no (and textsupport=no).
This wasted processor power. Furthermore, chan_sip accepted SDP offers,
including no audio but just video (or text) streams although
videosupport=no (or textsupport=no). Finally, chan_sip denied the whole
offer instead of individual streams when they had encryption (SDES-sRTP)
unexpectedly enabled.
ASTERISK-29238
ASTERISK-29237
ASTERISK-29222
Change-Id: Ie49e4e2a11f0265f914b684738348ba8c0f89755
session->channel doesn't exist until chan_pjsip creates it, so intead of
setting a channel variable every new incoming call sets one and the same
global variable.
This patch moves the code to chan_pjsip so that SIPDOMAIN is set on
a newly created channel, it also removes a misleading reference to
channel->session used to fetch call pickup configuraion.
ASTERISK-29240
Change-Id: I90c9bbbed01f5d8863585631a29322ae4e046755
The fix for ASTERISK-27902 made chan_pjsip process SIP responses twice.
This resulted in extra noise in logs (for example, "is making progress"
and "is ringing" get logged twice by app_dial), as well as in noise in
signalling: one incoming 183 Session Progress results in 2 outgoing 183-s.
This change splits the response handler into 2 functions:
- one for updating HANGUPCAUSE, which is still called twice,
- another that does the rest, which is called only once as before.
ASTERISK-28016
Reported-by: Alex Hermann
ASTERISK-28549
Reported-by: Gant Liu
ASTERISK-28185
Reported-by: Julien
Change-Id: I0a1874be5bb5ed12d572d17c7f80de6e5e542940
Add channel reference count for PJSIP REFER. The call could be terminated
prior to the result of the transfer. In that scenario, when the SUBSCRIBE/NOTIFY
occurred several minutes later, it would attempt to access a session which was
no longer valid. Terminate event subscription if pjsip_xfer_initiate() or
pjsip_xfer_send_request() fails in transfer_refer().
ASTERISK-29201 #close
Reported-by: Dan Cropp
Change-Id: I3fd92fd14b4e3844d3d7b0f60fe417a4df5f2435
In some circumstances it was possible for an INVITE
session to be destroyed while we were still using it.
This occurred due to the reference on the INVITE session
being released internally as a result of its state
changing to DISCONNECTED.
This change adds a reference to the INVITE session
which is released when our own session is destroyed,
ensuring that the INVITE session remains valid for
the lifetime of our session.
ASTERISK-29022
Change-Id: I300c6d9005ff0e6efbe1132daefc7e47ca6228c9
12 years ago, with ASTERISK_12115 the last four get/uses of socket.port
vanished. However, the struct member itself and all seven set/uses
remained as dead code.
ASTERISK-28798
Change-Id: Ib90516a49eca3d724a70191278aaf2144fb58c59
RFC 8760 added new digest-access-authentication schemes. Testing
revealed that chan_sip does not pick MD5 if several schemes are offered
by the User Agent Server (UAS). This change does not implement any of
the new schemes like SHA-256. This change makes sure, MD5 is picked so
UAS with SHA-2 enabled, like the service www.linphone.org/freesip, can
still be used. This should have worked since day one because SIP/2.0
already envisioned several schemes (see RFC 3261 and its augmented BNF
for 'algorithm' which includes 'token' as third alternative; note: if
'algorithm' was not present, MD5 is still assumed even in RFC 7616).
Change-Id: I61ca0b1f74b5ec2b5f3062c2d661cafeaf597fcd
Added to:
* bridges/bridge_softmix.c
* channels/chan_pjsip.c
* include/asterisk/res_pjsip_session.h
* main/channel.c
* res/res_pjsip_session.c
There NO functional changes in this commit.
Change-Id: I06af034d1ff3ea1feb56596fd7bd6d7939dfdcc3
This patch makes it so if the PJSIP_SEND_SESSION_REFRESH dialplan function
is called on a channel prior to answering a warning is issued and the
function returns unsuccessful.
ASTERISK-28878 #close
Change-Id: I053f767d10cf3b2b898fa9e3e7c35ff07e23c9bb
The ToHost parameter was not cleared when a peer's host value was
changed to dynamic. This causes invites to be sent to the original host.
ASTERISK-29011 #close
Change-Id: I9678d512741f71baca8f131a65b7523020b07d5c
When using the PSJIP_MEDIA_OFFER dialplan function it was not
overriding an endpoint's configured codecs on refresh unless
they had a shared codec between the two.
This patch makes it so whatever is set using PJSIP_MEDIA_OFFER
is used when creating the SDP for a refresh no matter what.
ASTERISK-28878 #close
Change-Id: I0f7dc86fd0fb607c308e6f98ede303c54d1eacb6
A patch made a reference to the PJSIP_SC_NULL enumeration value, which
was added to pjproject 2.8 and above thus making it so Asterisk would
fail to compile with prior versions of pjproject.
This patch removes the reference, and instead initializes the value
to '0'.
ASTERISK-28886 #close
Change-Id: I68491c80da1a0154b2286c9458440141c98db9d7
chan_sip handle_response() function, for a 400 response to an INVITE,
calls handle_response_invite() and does not generate ACK.
handle_response_invite() does not recognize 400 response and has no
default response processing for unexpected responses, thus it does not
generate ACK either.
The ACK on response repetition comes from handle_response() mechanism
"We must re-send ACKs to re-transmitted final responses".
According to code history, 400 response specific processing was
introduced with commit
"channels/chan_sip: Add improved support for 4xx error codes"
This commit added support for :
- 400/414/493 in handle_response_subscribe() handle_response_register()
and handle_response().
- 414/493 only in handle_response_invite().
This fix adds 400 response support in handle_response_invite().
ASTERISK-28957
Change-Id: Ic71a087e5398dfc7273946b9ec6f9a36960218ad
The change to how setvar works for various channels performed in
ASTERISK~23756 missed some required change in the dahdi channel,
where the variables are actually set while reading configuration.
This change should fix the issue.
ASTERISK-28955
Change-Id: Ibfeb7f8cbdd735346dc4028de6a265f24f9df274
When fax_gateway_framehook is called and a gateway hasn't already
been started, the framehook gets the t38 state for both the current
channel and the peer. That call trickles down to the channel
driver which determines the state. If either channel is hung up
(or in the process of being hung up), the channel driver's tech_pvt
is going to be NULL which, in the case of chan_pjsip, will cause a
segfault.
* Added a hangup check for both the channel and peer channel
before starting a fax gateway.
* Added a check for NULL tech_pvt to chan_pjsip_queryoption
so we don't attempt to reference a tech_pvt that's already
gone.
ASTERISK-28923
Reported by: Yury Kirsanov
Change-Id: I4e10e63b667bbb68c1c8623f977488f5d807897c
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
It is possible to configure a TCP/TLS client without having a TCP/TLS
server. In that case, no error or warning was printed but the headers
Contact and Via in SIP REGISTER were "(null)".
ASTERISK-28798
Change-Id: I387ca5cb6a65f1eb675a29c5e41df8ec6c242ab2
If chan_pjsip is configured for DTMF_RFC_4733, and the core triggers a
digit begin before media, or rtp has been setup then it's possible the
outgoing channel will hear a constant DTMF tone upon answering.
This happens because when there is no media, or rtp chan_pjsip notifies
the core to initiate inband DTMF. However, upon digit end if media, and
rtp become available then chan_pjsip does not notify the core to stop
inband DTMF. Thus the tone continues playing.
This patch makes it so chan_pjsip only notifies the core to start
inband DTMF in only the required cases. Now if there is no media, or
rtp availabe upon digit begin chan_pjsip does nothing, but tells the
core it handled it.
ASTERISK-28817 #close
Change-Id: I0dbea9fff444a2595fb18c64b89653e90d2f6eb5
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774
Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
Fixes the following compile error:
chan_vpb.cc:2688:26: error: catching polymorphic type
‘class std::exception’ by value
Change-Id: Ic87bc357d72427d77626735c83200fd278a7a649
If the SSRC of a received RTP packet differed from the previous SSRC
an SSRC change control frame would be queued ahead of the media
frame. In the case of audio this would result in the format of the
audio frame not being checked, and if it differed or was not allowed
then it could cause the call to drop due to failure to set up a
translation path.
The chan_pjsip module will now no longer assume the first frame
will be the audio frame and instead goes through the complete list
to find it.
ASTERISK-28759
Change-Id: I6d854cc523f343e299a615636fc65bdbd5f809ec
If you're for some reason out of RTP ports, chan_sip would previously
responde to an INVITE with a 403, which will fail the call.
Now, it returns a 503, allowing the device/proxy to retry the call on a
different machine.
ASTERISK-28718
Change-Id: I968dcf6c1e30ecddcce397dcda36db727c83ca90
Fixes no-audio issues when the media source is changed and
strictrtp is enabled (default).
If the peer media source changes, the SDP session version also changes.
If it is lower than the one we had stored, chan_sip would ignore it.
This changeset keeps track of the remote media origin identifier,
comparing that as well. If it changes, the session version needn't be
higher for us to accept the SDP.
Common scenario where this would've caused problems: a separate media
gateway that informs the caller about premium rates before handing off
the call to the final destination.
(An alternative fix would be to set ignoresdpversion=yes on the peer.)
ASTERISK-28686
Change-Id: I88fdbc5aeb777b583e7738c084254c482a7776ee
If chan_pjsip receives an RTP packet whose payload differs from the
channel's native format, and asymmetric_rtp_codec is disabled (the
default), Asterisk will switch the channel's native format to match
that of the incoming packet without regard to the negotiated payloads.
We now check that the received frame is in a format we have negotiated
before switching payloads which results in these packets being dropped
instead of causing the session to terminate.
ASTERISK-28139 #close
Reported by: Paul Brooks
Change-Id: Icc3b85cee1772026cee5dc1b68459bf9431c14a3
The no-entry timeout set to 999999 == 16⅔ minutes, change to INT_MAX
to match behavior of "no timeout" defined in comment.
ASTERISK-28702 #close
Change-Id: I4ea015986e061374385dba247b272f7aac60bf11
lws2sws() does not stop trying to handle header continuation lines
even after all headers have been found. This is problematic if the
first character of a SIP message body is a space or tab character, so
we update to recognize the end of the message header.
ASTERISK-28693 #close
Reported by: Frank Matano
Change-Id: Idec8fa58545cd3fd898cbe0075d76c223f8d33df
The change to add setting hangupsource to sig_pri_queue_hangup()
made in https://gerrit.asterisk.org/c/asterisk/+/12857 casued
deadlocks when a hangup request was received from the core at the
same time a hanguprequest was received from the remote end via the
D channel.
Although the PRI's channel private structure was being unlocked
before setting the hangupsource, the PRI's own lock was still being
held during the process. If channel actions were also coming from
the core, a deadlock on the PRI could result. This deadlock could
then escalate to the entire DAHDI subsystem via DAHDI's global
interface list lock, especially if someone used the PRI CLI commands.
Fix:
* We now unlock the PRI as well as the PRI's channel private
structure before setting the hangupsource, then relock both
afterwards.
ASTERISK-28605
Reported by: Dirk Wendland
Change-Id: Id74aaa5d4e3746063dbe9deed188eb65193cb9c9
The SIP transaction state was reset when emitting an UPDATE or a re-INVITE
related to a COLP, preventing RTP packets to be emitted.
ASTERISK-28647
Change-Id: Ie7a30fa7a97f711e7ba6cc17f221a0993d48bd8b
chan_sip.c:3782 __sip_xmit: sip_xmit of 0x7f1478069230 (len 600) to
213.150.203.60:1492 returned -2: Interrupted system call
returned -2 implies this wasn't actually an OS error, so errno makes no
sense either. Internal error was already logged higher up, and -2
generally means that either there isn't a valid connection available, or
the pipe notification failed, and that is already correctly logged.
ASTERISK-28651 #close
Change-Id: I46eb82924beeff9dfd86fa6c7eb87d2651b950f2
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
During capabilities selection (joint capabilities of us and peer,
configured capability for this peer, or general configured
capabilities), if sip_new() does not keep framing information,
then directmedia activation will fail for any framing different
from default framing.
ASTERISK-28637
Change-Id: I99257502788653c2816fc991cac7946453082466
If the name of a peer is known and a SIP request is sent using that
peer's name, the address of the peer will change even if the request
fails the authentication challenge. This means that an endpoint can
be altered and even rendered unusuable, even if it was in a working
state previously. This can only occur when the nat option is set to the
default, or auto_force_rport.
This change checks the result of authentication first to ensure it is
successful before setting the address and the nat option.
ASTERISK-28589 #close
Change-Id: I581c5ed1da60ca89f590bd70872de2b660de02df
Upon a short PRI disconnection, libpri may maintain Q.921 layer 'up' and
may thus not send PRI_EVENT_DCHAN_DOWN / PRI_EVENT_DCHAN_UP events.
If pri_event_alarm() clears DCHAN_UP status bit upon alarm detection
and no Q.921 reconnection sequence occurs, chan_dahdi will keep
seeing span status "Down" at the end of alarm.
This patch modifies pri_event_alarm() in order to keep DCHAN_UP bit
unchanged. libpri will send a PRI_EVENT_DCHAN_DOWN event if it detects
a disconnection of Q.921 layer and this will clear DCHAN_UP if required.
ASTERISK-28615
Change-Id: Ibe27df4971fd4c82cc6850020bce4a8b2692c996
