........
r76891 | tilghman | 2007-07-24 15:42:05 -0500 (Tue, 24 Jul 2007) | 2 lines
Found another place where we should be using the umask (thanks jcmoore)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r76801 | mmichelson | 2007-07-24 11:26:58 -0500 (Tue, 24 Jul 2007) | 13 lines
Added a membercount variable to call_queue struct which keeps track of the number of logged in members in a particular queue.
This makes it so that the 'n' option for Queue() can act properly depending on which strategy is used. If the strategy is
roundrobin, rrmemory, or ringall, we want to ring each phone once before moving on in the dialplan. However, if any other strategy is
used, we will only ring one phone since it cannot be guaranteed that a different phone will ring on subsequent attempts to ring a phone.
As a side effect of this, the QUEUE_MEMBER_COUNT dialplan function now just reads the membercount variable instead of traversing through
the member list to figure out how many members there are.
Special thanks to blitzrage for helping to test this out.
(closes issue #10127, reported by bcnit, patched by me, tested by blitzrage)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows you to just Dial(Skinny/line), as long as line isn't ambiguous.
Note that this does not remove or deprecate the "old" syntax, as it's still
quite useful - even moreso if shared lines get implemented.
Initial patch by me, with some changes and suggestions from wedhorn.
(closes issue #10263)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r76708 | tilghman | 2007-07-23 17:38:06 -0500 (Mon, 23 Jul 2007) | 4 lines
It was our stated intention for 1.4 that files created in app_voicemail should
depend upon the umask. Unfortunately, mkstemp() creates files with mode 0600,
regardless of the umask. This corrects that deficiency.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Makes the structures handling external AGI commands a bit more thread-safe
- Makes AGI transparently work with both live and hungup channels
- DeadAGI is hence no longer necessary and is deprecated
- CLI bug fixes
- Commands will refuse to run if the channel is dead and the command is nonsensical
for dead channels.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r76654 | file | 2007-07-23 15:29:48 -0300 (Mon, 23 Jul 2007) | 12 lines
Merged revisions 76653 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r76653 | file | 2007-07-23 15:28:13 -0300 (Mon, 23 Jul 2007) | 4 lines
(closes issue #5866)
Reported by: tyler
Do not force channel format changes when a generator is present. The generator may have changed the formats itself and changing them back would cause issues.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
does not use DTMF BEGIN frames.
1.4 seems correct (it does not have the two fields).
However, as this bug shows, the current way of creating the sip_tech
replica is too error-prone, one can easily forget to update one of
the two entries. Perhaps it would be better to create sip_tech_info
expliclty at module load, by doing
sip_tech_info = sip_tech;
sip_tech_info.send_digit_begin = NULL
(in this case, this is something applicable to 1.4 as well).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snuffy
Patches:
doxygen-updates.diff uploaded by snuffy (license 35)
Another big batch of doxygen documentation updates
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bbryant
Patches:
20070720__core_debug_by_file.patch uploaded by bbryant (license 36)
(with some modifications by me)
Tested by: russell, bbryant
This set of changes introduces the ability to set the core debug or verbose
levels on a per-file basis. Interestingly enough, in 1.4, you have the ability
to set core debug for a single file, but that functionality was accidentally
lost in the conversion of the CLI commands to the new format.
This patch improves upon what was in 1.4 by letting you set it for more than 1
file, and by also supporting verbose.
*** Janitor Project ***
This patch also introduces a new macro, ast_verb(), which is similar
to ast_debug(). Setting the per file verbose value only works for messages that
use this macro. Converting existing uses of ast_verbose() can be done like:
if (option_debug > 2)
ast_verbose(VERBOSE_PREFIX_3 "Something useful\n");
...
ast_verb(3, "Something useful\n");
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
between integers and strings using a single translation table,
and use them in a few places instead of ad-hoc routines
that duplicate the table.
On passing, note that REFER_CONFIRMED is never used, and add a
few comments.
Nothing to backport here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r76485 | russell | 2007-07-23 07:25:01 -0500 (Mon, 23 Jul 2007) | 6 lines
Use a signed integer for storing the number of bytes in the packet read from
the network. Using an unsigned value here made it impossible to handle an
error returned from recvfrom(). Furthermore, in the case that recvfrom()
did return an error, this would cause a crash due to a heap overflow.
(closes issue #10265, reported by and fix suggested by timrobbins)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
foo = sip_destroy(foo);
and reduce the chance of bugs due to dangling pointers.
Also remove a duplicate prototype for the function.
nothing to backport.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
responses, so that there is a common exit point.
Mark two places where probably we could return -1 instead of 0 to report
an error to the caller.
(change triggered by investigations on how the 'SIP_PKT_IGNORE' field was used).
nothing to backport from this commit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
individual variables. Apart from SIP_PKT_IGNORE which was used
a zillion times, the other two are used seldom.
On passing:
- move the arrays to the end of struct sip_request, so a (small)
buffer overflow is less likely to overwrite the other fields;
- note that the 'ignore' argument to handle_invite_replaces() is not
used and should be removed (will be done in a separate commit).
Nothing to backport in this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
