........
r375519 | rmudgett | 2012-10-30 16:06:15 -0500 (Tue, 30 Oct 2012) | 11 lines
chan_misdn: Timer primitives must be handled first.
The frm->addr is a different "address space" than the stack/instance
address of other Lx primitives. The test for B channel instance address
could fail.
Patches:
patch01_timers.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375520 | rmudgett | 2012-10-30 16:14:58 -0500 (Tue, 30 Oct 2012) | 10 lines
chan_misdn: Free memory in error paths and other memory leaks.
The one line commented with BUG is not easily fixable because there is no
de-init function one can call.
Patches:
patch02_memory.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375521 | rmudgett | 2012-10-30 16:38:41 -0500 (Tue, 30 Oct 2012) | 14 lines
chan_misdn: ISDN NT L2 de-establish/establish
* An NT-PTMP cannot de/establish L2 since it doesn't know the TEIs.
* On NT-PTP L2 is started when L1 is finally active in handle_l1.
* L2 deactivation logging cleanup.
* L2 aggregate link status is unknown for NT-PTMP, show as "UNKN".
* Removed unused functions and code for L2 handling.
Patches:
patch03_L2estab.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
r375522 | rmudgett | 2012-10-30 16:56:14 -0500 (Tue, 30 Oct 2012) | 22 lines
chan_misdn: Fix broken upper_id/lower_id usage.
Sending PH prim via lower_id layer (3 or 1) simply does not work. For TE
(3) it returns an error (len=-6) which is not evaluated by handle_l1(), so
the L1 layer status ends up wrong. Instead PH must be sent via L4, only
then does it reach L1 without an error message.
And NT PH prims only reach L1 when they are sent to layer 2 id.
--> use upper_id to send PH primitives.
* Check for errors in PH_(DE)ACTIVATE | CONFIRM.
* Debug messages are improved.
* The lower_id is now not used for anything, except: Why is lower_id layer
deleted when it wasn't created? I removed this code since it looks very
wrong.
Patches:
patch04_l1activation.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375523 | rmudgett | 2012-10-30 17:29:15 -0500 (Tue, 30 Oct 2012) | 31 lines
chan_misdn: Fix loss of B channels if L1 is down.
If you make 2 calls out an NT PTMP port which is not connected to any
phone, the B channel associated with that call becomes unusable until
Asterisk is restarted.
The problem is the EVENT_SETUP is queued when L1 is not up in
misdn_lib_send_event(). If L1 cannot be activated the event won't be
dequeued. It gets even worse when the call is hung up. The queued
EVENT_SETUP will be overwritten by an EVENT_DISCONNECT. The reserved B
channel then will never be freed. If later someone connects a phone to
the port, L1 will eventually activate and the queued EVENT_DISCONNECT is
sent down the stack. However, it is ignored because it is the wrong call
state.
The real fix would be that activation and queueing for a new SETUP is done
by the NT stack. But since it doesn't, the workaround must be removed
because it doesn't always work.
Fix: The event is no longer queued but immediately sent to the stack. If
L1 cannot be activated, the L3 state machine that was started by the
EVENT_SETUP will do its work, i.e. a timeout will release the B channel
properly. The SETUP possibly cannot be sent the first time but is resent
by T303 in case L1 could be activated.
Patches:
patch05_bchan-loss.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
r375524 | rmudgett | 2012-10-30 18:26:05 -0500 (Tue, 30 Oct 2012) | 13 lines
chan_misdn: Remove some calls to exit().
Try proper cleanup when something goes wrong in misdn_lib_init().
Especially do not call exit()!
* Fix memory leak because stack_destroy() does not free the stack struct.
Patches:
patch06_cleanup-init.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
Merged revisions 375519-375524 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 375625 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375626 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at some debug logs, I noticed that it was being reported that the
SDP origin line was unsupported or failed. Upon looking into this on my local
machine, I found that I too was getting this debug message yet everything seemed
to be getting processed properly. What was discovered is, that, the variable to
determine what is displayed in the debug message for the SDP line that was
processed, was not being set for the origin line when the result was successful.
This patch fixes this and was tested on local machine.
........
Merged revisions 375594 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375601 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On some systems the optional API support uses the GCC compiler attribute "weakref" to provide its
functionality. This code changes the function names and prefixes "__" to the front. The
res_http_websocket exports file did not take this into account, thereby not allowing those functions
to be global and ultimately found.
(closes issue ASTERISK-20631)
Reported by: danjenkins
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unlike all other calendar modules, res_calendar_ews fails to extract the Body
information for a calendar item. This is due, in part, to a quirk in the
schema in the XML - not only does a CalendarItem contain a Body element, but
the CalendarItem exists as a descendant of a different Body element. The neon
parser was erroneously skipping all Body elements.
This patch fixes that by bypassing Body elements that are not a child of
CalendarItem, and parsing the Body element out if it is a child.
Note that the original patch by Terry Wilson only needed slight modifications
to make it properly pull the Body information out; as such, while I've linked
to the patch that I uploaded for Dmitry, I've attributed the patch to Terry.
(closes issue ASTERISK-19738)
Reported by: Dmitry Burilov
Tested by: Dmitry Burilov
patches:
calendar_ews_body_2012_10_29.diff uploaded by Terry Wilson (license 6283)
........
Merged revisions 375528 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375531 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When confbridge was changed to handle conference status with a state machine in
r374658. The function responsible for starting recording for a conference was
refactored with the function actually responsible for launching the recording
thread being split into a function with another name. The old function name was
still used for manually started recordings through AMI or CLI. This patch fixes
that by switching which function is used to start recording the conference.
(closes issue ASTERISK-20601)
Reported by: Vilius
Patches:
confbridge_mixmonitor.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 375470 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a "sip reload" is issued for a SIP peer, then his
IP address will be cleared, thus resulting in forgetting the
public IP address. Asterisk will then attempt to route SIP
traffic to the private IP address.
The fix here is to make "sip reload" ignore realtime peers
when "host = dynamic" is spotted. Realtime peers can now only
have their IP address reset if they have gone from being not
dynamic to being dynamic.
(closes issue ASTERISK-18203)
reported by daren ferreira
(closes issue ASTERISK-20572)
reported by JoshE
Patches:
fix_nat_realtime.diff uploaded by JoshE (license #6075)
........
Merged revisions 375415 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375417 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The tech support customer was using the AMI Redirect action shortly after
a call was placed. While the channel tried to do an ast_read(), the
masquerade resulting from the channel redirect took place. The masquerade
in the middle of the ast_read() resulted in the segfault.
(closes issue AST-1025)
Reported by: Trey Blancher
Patches:
jira_ast_1025_v1.8_v2.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 375361 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375362 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
........
Merged revisions 375189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375190 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Review: https://reviewboard.asterisk.org/r/2161
........
Merged revisions 375025 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375026 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a format name was not found by ast_getformatbyname, a NULL pointer
would be passed into ast_format_rate and immediately dereferenced.
This ensures that a valid pointer is used since the structure is
already allocated on the stack.
(closes issue DPH-523)
Reported-by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
........
Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead of ignoring parts of the message that are not known just ignore the ones
we know may be present and that would cause a problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes the requirement for ufrag and pwd in the transport stanza and also
makes us the controlling agent.
(closes issue ASTERISK-20554)
Reported by: mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to r369351, the billing duration can be skewed when batch mode is
enabled. This happened much more rarely than the duration, as it only
occured when the call was answered (thereby indicating an actual answer
time) and immediately hung up on (indicating a billsec of 0). Since
a billing time of '0' can either mean that the call immediately ended
or that the CDR was improperly answered, we have to use additional information
to know whether or not we can trust the CDR billsec value. Prior to this
patch, we looked to see if we had a valid answer time. If we did, and
billsec was zero, we used the current time to calculate what billsec value
we could from the CDR being written. If batch mode is enabled, this will
incorrectly report a billsec value being much greater than the actual
duration of the call.
Instead of relying on the presence of an answer time to know whether or not
we can re-calculate the billsec for the CDR, we now also use the presence
of the CDR's end time to know if we need to re-calculate or whether we can
trust the billsec value that we have. This prevents erroneous jumps in the
billsec value, while still making sure that in the worst case, some billing
time will be calculated.
(closes issue AST-1016)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
........
Merged revisions 374843 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374844 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
(closes issue ASTERISK-20545)
Reported by: kmoore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Party A calls Party B
Party B puts Party A on hold.
Party B calls a queue.
Ringing queue member D sees Party B identification.
Party B transfers Party A to the queue.
Queue member D does not get a connected line update for Party A.
Queue member D answers the call and still sees Party B information.
However, if Party A later transfers the call to Party C then queue member
D gets a connected line update for Party C.
* Made pass connected line updates from the caller to queue members while
the queue members are ringing.
(closes issue AST-1017)
Reported by: Thomas Arimont
(closes issue ABE-2886)
Reported by: Thomas Arimont
Tested by: rmudgett
........
Merged revisions 374801 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 374802 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374803 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to usage of ast_hook_send_action, AMI action handling code should
be able to handle a NULL mansession->session. This would cause a crash
on NULL dereference if action_originate was called from
ast_hook_send_action.
(closes issue ASTERISK-20544)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If scan_service() cannot open the spool file, it logs a message saying
that it will delete the file and calls remove_from_queue() to do it.
However, remove_from_queue() fails to delete the spool file because struct
outgoing has not yet been fully initialized.
* Merged allocating a new struct outgoing and init_outgoing() into
new_outgoing(). Allocation is initialization.
* Made apply_outgoing() not initialize the spool filename in struct
outgoing.
* Made apply_outgoing() call ast_trim_blanks() and ast_skip_blanks()
rather than manually inlining them.
* Reduced indentation levels in apply_outgoing().
* Fixed a garbled comment in remove_from_queue().
* Reworked scan_service() to simplify it.
(closes issue ASTERISK-17231)
Reported by: David Chappell
Patches:
spool_open_failure.diff (license #4997) patch uploaded by David Chappell
Started with this patch.
........
Merged revisions 374686 from http://svn.asterisk.org/svn/asterisk/branches/1.8
* Fixed some memory leaks on off nominal paths in init_outgoing() when
merging into the new_outgoing() function dealing with o->capabilities.
........
Merged revisions 374695 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since there are a number of legacy devices out there that fail to handle ICE
candidates properly (which is a nice way of saying something much uglier),
disable it by default.
Support for ICE candidates can be enabled in rtp.conf using the icesupport
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thank's to Neil Tallim (flan)'s tireless testing, issue reporting, and patches
it became clear that app_confbridge had some complex logic in how it handled
interactions between marked, waitmarked, and unmarked users. In particular,
there were some areas in which the interactions between the users resulted
in inconsistent behavior, and app_confbridge was missing logic in how to handle
some corner cases. Some areas included:
* Poor handling of mixing unmarked and waitmarked users
* Inconsistencies in how MOH and muting was applied to various users
* Handling of various announcements for different user profile options
flan's patches seem to fix the various issues, but highlighted how hard the
code could be to maintain. In an attempt to make things easier to maintain and
to more fully enumerate the various cases that exist, this patch breaks up the
logic into a state machine-like setup.
Please note that the various state transitioned are documented on the Asterisk
wiki:
https://wiki.asterisk.org/wiki/display/AST/Confbridge+state+changes
Review: //https://reviewboard.asterisk.org/r/2072/
Note that for the following issues, mjordan uploaded the patch, although it
was written by twilson. Any contributor license discrepency is due to that.
(closes issue ASTERISK-19562)
Reported by: flan
Tested by: flan, mjordan, jrose
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
(closes issue ASTERISK-19726)
Reported by: flan
Tested by: flan
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
(closes issue ASTERISK-20181)
Reported by: Jonathan White
Tested by: Jonathan White
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
........
Merged revisions 374652 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pjproject, in order to solve build problems on Windows [1], undefines s_addr in
one of it's headers that is included in res_rtp_asterisk.c. On Solaris s_addr
is not a structure member, but defined to map to the real strucuture member,
therefore when building on Solaris it's possible to get build errors like:
[CC] res_rtp_asterisk.c -> res_rtp_asterisk.o
In file included from /export/home/admin/asterisk-11-svn/include/asterisk/stun.h:29,
from res_rtp_asterisk.c:51:
/export/home/admin/asterisk-11-svn/include/asterisk/network.h: In function `inaddrcmp':
/export/home/admin/asterisk-11-svn/include/asterisk/network.h:92: error: structure has no member named `s_addr'
/export/home/admin/asterisk-11-svn/include/asterisk/network.h:92: error: structure has no member named `s_addr'
res_rtp_asterisk.c: In function `ast_rtp_on_ice_tx_pkt':
res_rtp_asterisk.c:706: warning: dereferencing type-punned pointer will break strict-aliasing rules
res_rtp_asterisk.c:710: warning: dereferencing type-punned pointer will break strict-aliasing rules
res_rtp_asterisk.c: In function `rtp_add_candidates_to_ice':
res_rtp_asterisk.c:1085: error: structure has no member named `s_addr'
make[2]: *** [res_rtp_asterisk.o] Error 1
make[1]: *** [res] Error 2
make[1]: Leaving directory `/export/home/admin/asterisk-11-svn'
gmake: *** [_cleantest_all] Error 2
Unfortunately, in order to make this work, I also had to make sure pjproject
only used the typdef pj_in_addr and not the struct pj_in_addr so that when
building Asterisk I could "typedef struct in_addr pj_in_addr". It's possible
then that the library and users of those interfaces in Asterisk have a different
idea about the type of the argument, while on the surface it looks like they are
all 32 bit big endian values.
[1] http://trac.pjsip.org/repos/changeset/484
(issues ASTERISK-20366)
Reported by: Ben Klang
Tested by: Ben Klang, mjordan
patches:
0001-pjproject-Fix-for-Solaris-builds.-Do-not-undef-s.patch uploaded by Shaun Ruffell (license 5417)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374642 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes trivial build error on Solaris:
acl.c: In function `get_local_address':
acl.c:196: error: `best_score' undeclared (first use in this function)
acl.c:196: error: (Each undeclared identifier is reported only once
acl.c:196: error: for each function it appears in.)
make[2]: *** [acl.o] Error 1
(issue ASTERISK-20366)
Reported by: Ben Klang
Tested by: Ben Klang
patches:
0002-main-acl.c-Trivial.-best_score-should-be-defined-for.patch by Shaun Ruffell (license 5417)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While XEP-0115 states that the node and ver attributes are both required, some
devices fail to provide either field. Prior to this patch, failure to provide
the node or ver attribute would cause a crash in res_xmpp. While failing to
provide the node or ver attribute is technically invalid, since this
information is not utilized by Asterisk except for reporting purposes, for
interoperability reasons, we continue to process the capability stanza anyways.
(closes issue ASTERISK-20495)
Reported by: Martin W
Tested by: Martin W
patches:
20495.patch uploaded by Martin W (license #6434)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the channel technology agnostic application/AMI command MessageSend,
the "From" field is technically optional for the SIP channel driver. However,
if being sent by the XMPP resource module (either res_xmpp or res_jabber), the
"From" field is necessary, and must correspond to a defined account. This
patch updates the documentation for this application/AMI command to reflect
this.
(closes issue ASTERISK-20405)
Reported by: Leif Madsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
