Asterisk's RADIUS module currently build against libradiusclient-ng, but this
project has been superseeded by libfreeradius-client. The API is 99% compatible
except that the header name has changed, the library name has changed, and
the configuration file location has changed.
(closes issue ASTERISK-22980)
Reported by: Jeremy Lainé
Patches:
freeradius-client.patch uploaded by sharky (license 6561)
........
Merged revisions 406801 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_instance_make_compatible(), after a failure of
channel tech call get_rtp_info() to return peer_instance,
the null pointer would be passed to ao2_ref, producing an
error that looked like a refernce counting problem but is
not. This patch corrects that and adds helpful LOG_ERROR
messages to indicate which failure path occurred.
(issue AST-1276)
Review: https://reviewboard.asterisk.org/r/3156/
........
Merged revisions 406721 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
extconfig.conf was hard-coded to not allow nested includes for some reason.
The code has been this way since a patch was merged for ASTERISK-3333 (revision
4889), which was a significant update to this code ("Merge config updates").
I can't figure out any good reason why this should be limited. This patch just
removes the limit and uses the default nesting depth limit.
Closes issue ASTERISK-17837
Review: https://reviewboard.asterisk.org/r/3159/
........
Merged revisions 406643 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_filestream object gets tacked on to a channel via
chan->timingdata. It's a reference counted object, but the reference
count isn't used when putting it on a channel. It's theoretically
possible for another thread to interfere with the channel while it's
unlocked and cause the filestream to get destroyed.
Use the astobj2 reference count to make sure that as long as this code
path is holding on the ast_filestream and passing it into the file.c
playback code, that it knows it's valid.
Bug reported by Leif Madsen.
Review: https://reviewboard.asterisk.org/r/3135/
........
Merged revisions 406566 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL data structures need to be protected during a configuration reload
and shutdown. Asterisk crashed during a shutdown because CEL events were
still in flight and the CEL data structures were already destroyed.
* Protected the appset and linkedids ao2 containers using the reload_lock.
As a result appset, linkedids, and held objects don't need a lock.
* Added NULL checks before use of the appset and linkedids ao2 containers
in case the CEL module is already shutdown.
* Fixed overloading of the linkedids held objects reference count. During
shutdown any held objects would be leaked.
* Fixed memory leak of linkedids held objects if the LINKEDID_END is not
being tracked. The objects in the linkedids container were not removed if
the LINKEDID_END event is not used.
* Added access protection to the appset container during the CLI "cel show
status" command.
* Made CEL config reload not set defaults if the cel.conf file is invalid.
(closes issue AST-1253)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3127/
........
Merged revisions 406417 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made register atexit shutdown routine only once in __init_manager().
* Fixed some initial load failure conditions in __init_manager().
* Made reset options to defaults on reload when the reload will actually
happen.
* Removed unnecessary container traversals of the white/black filters
during manager_free_user().
* ast_free() does not need a NULL check before calling.
........
Merged revisions 406359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, the manager module would get an "INTERNAL_OBJ: bad magic
number" error on a "core restart gracefully" command if an AMI connection
is established.
* Added ao2_global_obj protection to the sessions global container.
* Fixed the order of unreferencing a session object in session_destroy().
* Removed unnecessary container traversals of the white/black filters
during session_destructor().
(closes issue AST-1242)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3144/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_build_timing, initialize the timezone value to NULL
in order to avoid deferencing an uninitialized value later
when calling ast_destroy_timing. The timezone value could
be uninitialized if ast_build_timing were to fail due to a
zero length time string.
(closes issue ASTERISK-22861)
Reported by: Sebastian Murray-Roberts
Review: https://reviewboard.asterisk.org/r/3134/
Patches:
ast_build_timing-initialize-timezone.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 406241 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge AMI and CLI commands for mute, unmute, and setting the
single video source can accept channel prefixes in lieu of a full
channel name, but documentation states only that it is required and is
a channel name. This corrects the documentation.
(closes issue PQ-1397)
Reported by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to decline individual image streams over
unsupported transports in the SDP of the 200 response. Previously,
an image stream offer with RTP/AVP as the transport would cause
chan_sip to respond with a 488.
(closes issue ASTERISK-22988)
Reported by: adomjan
Original patch by: adomjan
........
Merged revisions 406170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This restricts direct usage of global oseq so that all accesses are
locked and threads are not racing to get oseq values that they did not
claim.
This also fixes a build error in res_pktccops under dev mode.
(closes issue ASTERISK-23100)
Reported by: adomjan
Patch by: adomjan
........
Merged revisions 406037 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
action_originate responds to the remote system with an error when cap==NULL,
but doesn't return (abort the originate). Patched to return.
(closes issue ASTERISK-23034)
Reported by: Corey Farrell
Patches:
ASTERISK-23034.patch uploaded by coreyfarrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to the new standard for V.27 and V.32 they are able to transmit
at a bit rate of 4,800 or 9,600. The check_mode_rate function needed to be
updated to reflect this. Also, because of this change the default 'minrate'
value was updated to be 4800.
(closes issue ASTERISK-22790)
Reported by: Paolo Compagnini
Patches:
res_fax.txt uploaded by looserouting (license 6548)
........
Merged revisions 405656 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-12117, an improvement to insure consistant local from tags
on outbound registrations resulted in an undesirable behavior - caused
by leftover unexpired sip_pvt dialogs (with the previous cseq number),
resulting in many uncessary REGISTER requests. Instead of significant
rework of transmit_register(), this change deletes the dialogs after a
200 OK response indiciating a successful registration, keeping the old
dialogs from interfering with normal operation.
(closes issue ASTERISK-22946)
Reported by: Stephan Eisvogel
Review: https://reviewboard.asterisk.org/r/3109/
........
Merged revisions 405433 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When performing a SIP transfer to a Park extension, if the Park fails, chan_sip
will currently not hang up either the transferer or the transfer target. This
results in the channels being orphaned with no thread to service frames,
resulting in stuck channels.
This patch immediately hangs up the two channels if a Park fails.
(closes issue ASTERISK-22834)
Reported by: rsw686
Tested by: rsw686
(closes issue ASTERISK-23047)
Reported by: Tommy Thompson
Tested by: Tommy Thomspon
Review: https://reviewboard.asterisk.org/r/3107
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A 'make distclean' is equivalent to 'make dist-clean' in the top most Makefile.
This patch updates the res/Makefile to recognize both distclean and dist-clean.
Note that this is needed for removing build.mak, which can run into problems
if the source file of Asterisk or its path is changed after build.mak is
generated.
(issue ASTERISK-22480)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_ice_start if the ice session create check list failed, start check
was never initiated and ice_started was never set to true. Upon re-entering
the function (for instance, [un]hold) it would try to create the check list
again with duplicate remote candidates.
Fixed so that if the create check list fails the necessary data structures
are properly re-initialized for any subsequent retries.
Note, it was decided to not stop ice support (by calling ast_rtp_ice_stop) on a
check list failure because it possible things might still work. However, a
debug message was added to help with any future troubleshooting.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Patches:
works_on_my_machine.patch uploaded by xytis (license 6558)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When waitmarked users join a ConfBridge, the conference state is transitioned
from EMPTY -> INACTIVE. In this state, the users are maintined in a waiting
users list. When a marked user joins, the ConfBridge conference transitions
from INACTIVE -> MULTI_MARKED, and all users are put onto the active list of
users. This process works correctly.
When the marked user leaves, if they are the last marked user, the MULTI_MARKED
state does the following:
(1) It plays back a message to the bridge stating that the leader has left the
conference. This requires an unlocking of the bridge.
(2) It moves waitmarked users back to the waiting list
(3) It transitions to the appropriate state: in this case, INACTIVE
However, because it plays the prompt back to the bridge before moving the users
and before finishing the state transition, this creates a race condition: with
the bridge unlocked, waitmarked users who leave the conference (or are kicked
from it) can cause a state transition of the bridge to another state before
the conference is transitioned to the INACTIVE state. This causes the state
machine to get a bit wonky, often leading to a crash when the MULTI_MARKED state
attempts to conclude its processing.
This patch fixes this problem:
(1) It prevents kicked users from being kicked again. That's just a nicety.
(2) More importantly, it fixes the race condition by only playing the prompt
once the state has transitioned correctly to INACTIVE. If waitmarked users
sneak out during the prompt being played, no harm no foul.
Review: https://reviewboard.asterisk.org/r/3108/
Note that the patch committed here is essentially the same as uploaded by
Simon Moxon on ASTERISK-22740, with the addition of the double kick prevention.
(closes issue AST-1258)
Reported by: Steve Pitts
(closes issue ASTERISK-22740)
Reported by: Simon Moxon
patches:
ASTERISK-22740.diff uploaded by Simon Moxon (license 6546)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405215 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Upon reload the module unconditionally "unloaded" the module (freeing memory
and setting pointers to NULL) and then when attempting a "load" if the config
file had not changed then nothing would be reinitialized.
By moving the "unload" to occur conditionally (reload only) after an attempted
configuration load, but before module "loading" alleviates the issue. The module
now loads/unloads/reloads correctly.
(closes issue ASTERISK-22871)
Reported by: Matteo
........
Merged revisions 404857 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dahdi show channels output slices the callerid (which is dnid copied over on
PRI channels). If the channel naming structures look like:
'DAHDI/i1/1408409XXXX-6'
then the output slices 1408409XXXX down to 1408409XXX. This patch just opens
it up to 15 chars so you can see the whole thing.
(closes issue ASTERISK-22918)
Reported by: outtolunc
Patches:
svn_chan_dahdi.c.format12_15.diff.txt uploaded by outtolunc (license 5198)
........
Merged revisions 404784 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When calling REPLACE() with an empty replace-char argument, strcpy
is used to overwrite the the matching <find-char>. However as the
src and dest arguments to strcpy must not overlap, it causes other
parts of the string to be overwritten with adjacent characters and
the result is mangled. Patch replaces call to strcpy with memmove
and adds a test suite case for REPLACE.
(closes issue ASTERISK-22910)
Reported by: Gareth Palmer
Review: https://reviewboard.asterisk.org/r/3083/
Patches:
func_strings.patch uploaded by Gareth Palmer (license 5169)
........
Merged revisions 404674 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A deadlock can happen between a thread unloading or reloading the cel_pgsql
module and the core_event_dispatcher taskprocessor thread. Description of
what is happening:
Thread 1 (for example, a netconsole thread):
a "module reload cel_pgsql" is launched
the thread enter the "my_unload_module" function (cel_pgsql.c)
the thread acquire the write lock on psql_columns
the thread enter the "ast_event_unsubscribe" function (event.c)
the thread try to acquire the write lock on ast_event_subs[sub->type]
Thread 2 (core_event_dispatcher taskprocessor thread):
the taskprocessor pop a CEL event
the thread enter the "handle_event" function (event.c)
the thread acquire the read lock on ast_event_subs[sub->type]
the thread callback the "pgsql_log" function (cel_pgsql.c), since it's a subscriber of CEL events
the thread try to acquire a read lock on psql_columns
(closes issue ASTERISK-22854)
Reported by: Etienne Lessard
Patches:
cel_pgsql_fix_deadlock_event.patch uploaded by hexanol (license 6394)
........
Merged revisions 404603 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
'core show channeltypes' type column is being sliced, resulting in incomplete
type names.
(closes issue ASTERISK-22919)
Reported by: outtolunc
Patches:
svn_channel.c.format_15.diff.txt uploaded by outtolunc (license 5198)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In fax_detect_framehook() a null pointer reference can occur where a
voice frame is processed but no dsp is attached to the fax detection
structure. The code block that rejects frames that detection cannot
be processed on is checking for dsp but falls through when it should
instead return, as this change implements.
(closes issue ASTERISK-22942)
Reported by: adomjan
Review: https://reviewboard.asterisk.org/r/3076/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is shut down, the astdb_atexit() function releases
(finalize) the previously initiated (prepared) SQL statements in
sqlite3. Another thread making a subsequent request can cause a
crash in sqlite3. This patch eliminates that issue by resetting
the statement pointer after it is released/cleared. The sqlite3
code detects the null pointer, and aborts the operation cleanly.
(closes issue AST-1265)
Reported by: Alexander Hömig
(closes issue ASTERISK-22350)
Reported by: Birger "WIMPy" Harzenetter
Review: https://reviewboard.asterisk.org/r/3078/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Introduce new 'stopped' state for gk client and restart gk client
on failures
Remove ooh323 stack command lock as it is not need now.
(closes issue ASTERISK-21960)
Reported by: Dmitry Melekhov
Patches:
ASTERISK-21960.patch
ASTERISK-21960-stacklockup-2.patch
Tested by: Dmitry Melekhov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@403917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During dialplan execution in pbx_extension_helper(), the contexts global
read lock prevents link list corruption, but was released with a pointer
to the ast_exten and data later used in variable substitution. Instead,
this patch removes pbx_substitute_variables() and locates a copy of the
ast_exten data on the stack before releasing the lock, where ast_exten
could get free'd by another thread performing a module reload.
(issue AST-1179)
Reported by: Thomas Arimont
(issue AST-1246)
Reported by: Alexander Hömig
Review: https://reviewboard.asterisk.org/r/3055/
........
Merged revisions 403862 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@403863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
