options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321528 | may | 2011-06-01 14:40:19 +0400 (Wed, 01 Jun 2011) | 14 lines
Fix double alerting, add forced alerting before answer
Fix double alerting (it wasn't fixed here by issue #18542)
Add forced alerting before connect (if it wasn't before)
Try to send all packets from outgoing queue rather than one only
Call goes into clearing state when disconnect command is received
(closes issue #19361)
Reported by: vmikhelson
Patches:
issue19361-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
IPv6 support for ooh323,
bindaddr, peers and users ip can be IPv4 or IPv6 addr
correction for multi-homed mode (0.0.0.0 or :: bindaddr)
can work in dual 6/4 mode with :: bindaddr
gatekeeper mode isn't supported in v6 mode while
(issue #18278)
Reported by: may213
Patches:
ipv6-ooh323.patch uploaded by may213 (license 454)
Review: https://reviewboard.asterisk.org/r/1004/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
small fixes.
Interpret remote side H.225 version.
Corrections for H.323v2 endpoints:
don't start TCS and MSD before connect,
don't start TCS and MSD by accepting H.245 connection,
start TCS and MSD by StartH245 facility message.
Other fixes:
fix non zeroended remoteDisplayName issue, small fixes in call clearing
by closing H.245 connection, tcp keepalive introduced on TCP
connections (now is hardcoded, will be configurable in the future),
don't force H.245tunneling if FastStart is active, don't send Alerting
singal more than once per call.
(closes issue #18542)
Reported by: vmikhelson
Patches:
issue18542-final-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change order of sending Terminal Capability Set and MasterSlave
Determination packets, MSD send when TCS exchange procedure is done
(we send tcs ack to remote and we have remote tcs ack already
or we receive tcs ack from remote and we have send our tcs ack to
remote already). Some endpoints can work in this sequence only,
i suggest they can't work with both (tcs and msd) exchange procedures
simultaneously.
Also changed StartH245 facility message sending. It send on
incoming calls only due to some endpoints can't proccess properly
this facility messages on their incoming calls.
(closes issue #18433)
Reported by: MrHanMan
Patches:
tcs-msd-h245-3.patch uploaded by may213 (license 454)
Tested by: MrHanMan, may213
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now that these files are in the tree, they should prefer the tree's local
copy of all Asterisk headers over any that may be installed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
added response to roundtrip delay requests from opposite side
added roundtrip delay request sending to opposite side after answer,
added options for sending request (interval between request and
count of unreplied requests before forced call hangup)
(closes issue #16976)
Reported by: vmikhelson
Patches:
rtdr-1.6.0-2.patch uploaded by may213 (license 454)
Tested by: vmikhelson, may213
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some reason, the code compiles just fine with later versions
of GCC, but this one requires some weird double casting in order
to get rid of all warnings. Whatever.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Many architectural and functional changes.
Main changes are threading model chanes (many thread in ooh323 stack
instead of one), modifications and improvements in signalling part,
additional codecs support (726, speex), t38 mode support.
This module tested and used in production environment.
(closes issue #15285)
Reported by: may213
Tested by: sles, c0w, OrNix
Review: https://reviewboard.asterisk.org/r/324/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
