Adds a function to check for the existence of a channel by
name or by UNIQUEID.
ASTERISK-29656 #close
Change-Id: Ib464e9eb6e13dc683a846286798fecff4fd943cb
Previously, if custom hints were used with the hint:
format in app_queue, when device state changes occured,
app_queue would only do a literal string comparison of
the context used for the hint in app_queue and the context
of the hint which just changed state. This caused hints
to not update and become stale if the context associated
with the agent included the context which actually changes
state, essentially completely breaking device state for
any such agents defined in this manner.
This fix adds an additional check to ensure that included
contexts are also compared against the context which changed
state, so that the behavior is correct no matter whether the
context is specified to app_queue directly or indirectly.
ASTERISK-29578 #close
Change-Id: I8caf2f8da8157ef3d9ea71a8568c1eec95592b78
Rather than stripping parameters from Content-Type headers before
comparison, first try to compare the whole string. If no match is
found, strip the parameters and try that way.
ASTERISK-29275 #close
Change-Id: I2963c8ecbb3a9605b78b6421c415108d77a66a0f
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Some code has been added referencing symbols defined in a block
protected by #ifdef HAVE_PJPROJECT. Protect those code parts in
ifdef blocks too.
ASTERISK-29660
Change-Id: Ib18d4392d51ac80ca5481dabf6e498a4e3e49e6f
An issue was found where a particular manufacturer's phones add a
trailing space to the end of the rtpmap attribute when specifying
a payload type that has a "param" after the format name and clock
rate. For example:
a=rtpmap:120 opus/48000/2 \r\n
Because pjmedia_sdp_attr_get_rtpmap currently takes everything after
the second '/' up to the line end as the param, the space is
included in future comparisons, which then fail if the param being
compared to doesn't also have the space.
We now use pj_scan_get() to parse the param part of rtpmap so
trailing whitespace is automatically stripped.
ASTERISK-29654
Change-Id: Ibd0a4e243a69cde7ba9312275b13ab62ab86bc1b
In new mpg123 versions (since 1.26) the default output is 32 bits
Asterisk expects the output in 16 bits, so we force the output to be on 16 bits.
It will work wit new and old versions of mpg123.
Thanks Thomas Orgis <thomas-forum@orgis.org> for giving the key!
ASTERISK-29635 #close
Change-Id: I88c7740118b5af4e895bd8b765b68ed5c11fc816
Adds parsing of ANI II digits (Originating
Line Information) to PJSIP, on par with
what currently exists in chan_sip.
ASTERISK-29472
Change-Id: Ifc938a7a7d45ce33999ebf3656a542226f6d3847
Adds a SendMF application and PlayMF manager
event to send arbitrary R1 MF tones on the
current or specified channel.
ASTERISK-29496
Change-Id: I5d89afdbccee3f86cc702ed96d882f3d351327a4
Previously, the error emitted when app_stack tries
to branch to a dialplan location that doesn't exist
has included only the information about the attempted
branch in the error log. This adds the current location
as well so users can see where the branch failed in
the logs.
ASTERISK-29626
Change-Id: Ia23502ab2ad21485a1ac74295063a8f25a6df5ce
Adds the STRBETWEEN function, which can be used to insert a
substring between each character in a string. For instance,
this can be used to insert pauses between DTMF tones in a
string of digits.
ASTERISK-29627
Change-Id: Ice23009d4a8e9bb9718d2b2301d405567087d258
We can't rely on RAII_VAR(...) to properly clean up data that is
allocated within a loop.
ASTERISK-27176 #close
Change-Id: Ib575616101230c4f603519114ec62ebf3936882c
Adds the DIRNAME and BASENAME functions, which are
wrappers around the corresponding C library functions.
These can be used to safely and conveniently work with
file paths and names in the dialplan.
ASTERISK-29628 #close
Change-Id: Id3aeb907f65c0ff96b6e57751ff0cb49d61db7f3
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
With gcc 11, res/res_snmp.c and res/snmp/agent.c need the
-fPIC option added to its _ASTCFLAGS.
ASTERISK-29634
Change-Id: I34649c85e075fd954e578378fabf798c3f038f50
There is an option to silence voicemail instructions but it does not
take into consideration if a recorded greeting exists or not. Add a
new 'S' option that does that.
ASTERISK-29632 #close
Change-Id: I03f2f043a9beb9d99deab302247e2a8686066fb4
ncurses 6.1 introduced an extended number format for terminfo files
which the terminfo parsing in Asterisk is not able to parse. This
results in some TERM values that do support color (screen-256color on
Ubuntu 20.04 for example) to not get a color console.
ASTERISK-29630 #close
Change-Id: I27a4fcfab502219924af2d6b1c46feba92903cb3
When compiled without extended srtp crypto suites also disable parsing
these from received SDP. This prevents using these, as some client
implementations are not stable.
ASTERISK-29625
Change-Id: I7dafb29be1cdaabdc984002573f4bea87520533a
IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.
ASTERISK-28004 #close
Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d
There are conditions under which a failure to change topology
is expected so there's no need to print an ERROR message.
ASTERISK-29618
Reported by: Alexander
Change-Id: Idc168b8588e018bf3a23769f08c4ad646086d481
There are 3 separate changes here but they are all closely related:
* Only try to set matchfield attributes on 'field' nodes
* We need to adjust how we treat the category pointer based on the
value of the category_match, to avoid memory corruption. We now
generate a regex-like string when match types other than
ACO_WHITELIST and ACO_BLACKLIST are used.
* Switch app_agent_pool from ACO_BLACKLIST_ARRAY to
ACO_BLACKLIST_EXACT since we only have one category we need to
ignore, not two.
ASTERISK-29614 #close
Change-Id: I7be7bdb1bb9814f942bc6bb4fdd0a55a7b7efe1e
Adds an information element for ANI2 so that
Originating Line Information can be transmitted
over IAX2 channels.
ASTERISK-29605 #close
Change-Id: Iaeacdf6ccde18eaff7f776a0f49fee87dcb549d2
Currently pbx_ael does not check if a reload is currently pending
before proceeding with a reload. This can cause multiple threads to
operate at the same time on what should be mutex protected data. This
change adds protection to reloading to ensure only one ael reload is
executing at a time.
ASTERISK-29609 #close
Change-Id: I5ed392ad226f6e4e7696ad742076d3e45c57af35
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
The attended transfer feature will emit a warning if the user
cancels the transfer or the attended transfer doesn't complete
for any reason. Changes the warning to a verbose message,
since nothing is actually wrong here.
ASTERISK-29612 #close
Change-Id: I64c93cdb21360a0a8d45e9cb6db3af8168f66e6d
Prevents reloads of app_queue from also resetting
queue statistics.
Also preserves individual queue agent statistics
if we're just reloading members.
ASTERISK-28701
Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1
This changeset is intended to address compatibility issues encountered
when interfacing Asterisk to electromechanical telephone switches that
implement ANI-B, ANI-C, or ANI-D.
In particular the behaviours that this impacts include:
- FGC-CAMA did not work at all when using MF signaling. Modified the
switch case block to send calls to the correct part of the
signaling-handling state machine.
- For FGC-CAMA operation, the delay between called number ST and
second wink for ANI spill has been made configurable; previously
all calls were made to wait for one full second.
- After the ANI spill, previous behavior was to require a 'ST' tone
to advance the call. This has been changed to allow 'STP' 'ST2P'
or 'ST3P' as well, for compatibility with ANI-D.
- Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable.
- For calls with an ANI failure, No. 1 Crossbar switches will send
forward a single-digit failure code, with no calling number digits
and no ST pulse to terminate the spill. I've made the ANI timeout
configurable so to reduce dead air time on calls with ANI fail.
- ANI info digits configurable. Modern digital switches will send 2
digits, but ANI-B sends only a single info digit. This caused the
ANI reported by Asterisk to be misaligned.
- Changed a confusing log message to be more informative.
ASTERISK-29518
Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256
When playing a remote sound file, which is not in cache, first we need
to download it with ast_bucket_file_retrieve.
This can take a while if the remote host is slow. The current CURL
timeout is 180secs, so in extreme situations, it can take 3 minutes to
return.
Because ast_media_cache_retrieve has a lock on all function, while we
are waiting for the delayed download, Asterisk is not able to play any
more files, even the files already cached locally.
ASTERISK-29544 #close
Change-Id: I8d4142b463ae4a1d4c41bff2bf63324821567408
Allow mapping pjproject log messages to the Asterisk TRACE
log level. The defaults were also changes to log pjproject
levels 3,4 to DEBUG and 5,6 to TRACE. Previously 3,4,5,6
all went to DEBUG.
ASTERISK-29582
Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d
The Milliwatt application uses incorrect tone timings
that cause it to play the 1004 Hz tone constantly.
This adds an option to enable the correct timing
behavior, so that the Milliwatt application can
be used for milliwatt test lines. The default behavior
remains unchanged for compatability reasons, even
though it is incorrect.
ASTERISK-29575 #close
Change-Id: I73ccc6c6fcaa31931c6fff3b85ad1805b2ce9d8c
The MIN, MAX, and ABS functions all support float
arguments, but currently return floats even if the
arguments are all integers and the response is
a whole number, in which case the user is likely
expecting an integer. This casts the float to an integer
before printing into the response buffer if possible.
ASTERISK-29495
Change-Id: I902d29eacf3ecd0f8a6a5e433c97f0421d205488
Previously, the Morsecode application only supported international
Morse code. This adds support for American Morse code and adds an
option to configure the frequency used in off intervals.
Additionally, the application checks for hangup between tones
to prevent application execution from continuing after hangup.
ASTERISK-29541
Change-Id: I172431a2e18e6527d577e74adfb05b154cba7bd4
Adds a function to scramble audio on a channel using
whole spectrum frequency inversion. This can be used
as a privacy enhancement with applications like
ChanSpy or other potentially sensitive audio.
ASTERISK-29542
Change-Id: I01020769d91060a1f56a708eb405f87648d1a67e
A list of codecs to use for dialplan-originated calls can
now be specified in Originate, similar to the ability
in call files and the manager action.
Additionally, we now default to just using the slin codec
for originated calls, rather than all the slin* codecs up
through slin192, which has been known to cause issues
and inconsistencies from AMI and call file behavior.
ASTERISK-29543
Change-Id: I96a1aeb83d54b635b7a51e1b4680f03791622883
Commit 305ce3d added -Wno-parentheses-equality to Makefile.rules,
turning the previous two warning suppressions from commit e9520db
redundant. Let us remove the latter.
Change-Id: I0b471254b31e6e05902062761dded4b3e626c7ac
