kenmirrors/asterisk
1
0
Fork 0
mirror of https://github.com/asterisk/asterisk.git synced 2025-10-31 02:37:10 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
39d3580ee405279ca22ab3277c85ea1b5105727d
asterisk/doc/osp.txt
TransNexus OSP Development ebb4674f8b 1. Update osp guide. 
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-01-04 20:27:39 +00:00

805 lines
34 KiB
Plaintext
Raw Blame History

OSP User Guide for Asterisk V1.6
4 January 2007
Table of Contents
1 Introduction
2 OSP Toolkit
2.1 Build OSP Toolkit
2.1.1 Unpacking the Toolkit
2.1.2 Preparing to build the OSP Toolkit
2.1.3 Building the OSP Toolkit
2.1.4 Installing the OSP Toolkit
2.1.5 Building the Enrollment Utility
2.2 Obtain Crypto Files
3 Asterisk
3.1 Configure for OSP Support
3.1.1 Build Asterisk with OSP Toolkit
3.1.2 osp.conf
3.1.3 extensions.conf
3.1.4 zapata/sip/iax/h323/ooh323.conf
3.2 OSP Dial Plan Functions
3.2.1 OSPAuth
3.2.2 OSPLookup
3.2.3 OSPNext
3.2.4 OSPFinish
3.3 extensions.conf Examples
3.3.1 Source Gateway
3.3.2 Destination Gateway
3.3.3 Proxy
Asterisk is a trademark of Digium, Inc.
TransNexus and OSP Secures are trademarks of TransNexus, Inc.
1 Introduction
This document provides instructions on how to build and configure Asterisk
V1.6 with the OSP Toolkit to enable secure, multi-lateral peering. This
document is also available in the Asterisk source package as doc/osp.txt.
The OSP Toolkit is an open source implementation of the OSP peering protocol
and is freely available from www.sipfoundry.org. The OSP standard defined by
the European Telecommunications Standards Institute (ETSI TS 101 321)
www.esti.org. If you have questions or need help, building Asterisk with the
OSP Toolkit, please post your question on the OSP mailing list at
https://list.sipfoundry.org/mailman/listinfo/osp.
2 OSP Toolkit
Please reference the OSP Toolkit document "How to Build and Test the OSP
Toolkit" available from https://www.sipfoundry.org/OSPclient.
2.1 Build OSP Toolkit
The software listed below is required to build and use the OSP Toolkit:
* OpenSSL (required for building) - Open Source SSL protocol and Cryptographic
Algorithms (version 0.9.7g recommended) from www.openssl.org. Pre-compiled
OpenSSL binary packages are not recommended because of the binary
compatibility issue.
* Perl (required for building) - A programming language used by OpenSSL for
compilation. Any version of Perl should work. One version of Perl is
available from www.activestate.com/Products/ActivePer. If pre-compiled
OpenSSL packages are used, Perl package is not required.
* C compiler (required for building) - Any C compiler should work. The GNU
Compiler Collection from www.gnu.org is routinely used for building the OSP
Toolkit for testing.
* OSP Server (required for testing) - Access to any OSP server should work.
Open source OSP servers are available from https://www.sipfoundry.org/OSP,
or go to http://www.transnexus.com/OSP%20Toolkit/Peering_Server/VoIP_Peering_Server.htm
to download a free commercial OSP server.
2.1.1 Unpacking the Toolkit
After downloading the OSP Toolkit (version 3.3.6 or later release) from
www.sipfoundry.org, perform the following steps in order:
1) Copy the OSP Toolkit distribution into the directory where it will reside.
The default directory for the OSP Toolkit is /usr/src.
2) Un-package the distribution file by executing the following command:
gunzip -c OSPToolkit-###.tar.gz | tar xvf -
Where ### is the version number separated by underlines. For example, if
the version is 3.3.6, then the above command would be:
gunzip -c OSPToolkit-3_3_6.tar.gz | tar xvf -
A new directory (TK-3_3_6-20060303) will be created within the same
directory as the tar file.
3) Go to the TK-3_3_6-20060303 directory by running this command:
cd TK-3_3_6-20060303
Within this directory, you will find directories and files similar to what
is listed below if the command "ls -F" is executed):
ls -F
enroll/
RelNotes.txt lib/
README.txt license.txt
bin/ src/
crypto/ test/
include/
2.1.2 Preparing to build the OSP Toolkit
4) Compile OpenSSL according to the instructions provided with the OpenSSL
distribution (You would need to do this only if you don't have openssl
already).
5) Copy the OpenSSL header files (the *.h files) into the crypto/openssl
directory within the osptoolkit directory. The OpenSSL header files are
located under the openssl/include/openssl directory.
6) Copy the OpenSSL library files (libcrypto.a and libssl.a) into the lib
directory within the osptoolkit directory. The OpenSSL library files are
located under the openssl directory.
Note: Since the Asterisk requires the OpenSSL package. If the OpenSSL
package has been installed, steps 4 through 6 are not necessary.
7) Optionally, change the install directory of the OSP Toolkit. Open the
Makefile in the /usr/src/TK-3_3_6-20060303/src directory, look for the
install path variable - INSTALL_PATH, and edit it to be anywhere you want
(defaults /usr/local).
Note: Please change the install path variable only if you are familiar
with both the OSP Toolkit and the Asterisk.
2.1.3 Building the OSP Toolkit
8) From within the OSP Toolkit directory (/usr/src/TK-3_3_6-20060303), start
the compilation script by executing the following commands:
cd src
make clean; make build
2.1.4 Installing the OSP Toolkit
The header files and the library of the OSP Toolkit should be installed.
Otherwise, you must specify the OSP Toolkit path for the Asterisk.
9) Use the make script to install the Toolkit.
make install
The make script is also used to install the OSP Toolkit header files and
the library into the INSTALL_PATH specified in the Makefile.
Note: Please make sure you have the rights to access the INSTALL_PATH
directory. For example, in order to access /usr/local directory,
root privileges are required.
2.1.5 Building the Enrollment Utility
Device enrollment is the process of establishing a trusted cryptographic
relationship between the VoIP device and the OSP Server. The Enroll program is
a utility application for establishing a trusted relationship between an OSP
client and an OSP server. Please see the document "Device Enrollment" at
https://www.sipfoundry.org/OSPclient for more information about the enroll
application.
10) From within the OSP Toolkit directory (example:
/usr/src/TK-3_3_6-20060303), execute the following commands at the command
prompt:
cd enroll
make clean; make linux
Compilation is successful if there are no errors in the compiler output.
The enroll program is now located in the OSP Toolkit/bin directory
(example: /usr/src/ TK-3_3_6-20060303/bin).
2.2 Obtain Crypto Files
The OSP module in Asterisk requires three crypto files containing a local
certificate (localcert.pem), private key (pkey.pem), and CA certificate
(cacert_0.pem). Asterisk will try to load the files from the Asterisk
public/private key directory - /var/lib/asterisk/keys. If the files are not
present, the OSP module will not start and the Asterisk will not support the
OSP protocol. Use the enroll.sh script from the toolkit distribution to
enroll Asterisk with an OSP server and obtain the crypto files. Documentation
explaining how to use the enroll.sh script (Device Enrollment) to enroll with
an OSP server is available at https://www.sipfoundry.org/OSPclient. Copy the
files generated by the enrollment process to the Asterisk
/var/lib/asterisk/keys directory.
Note: The osptestserver.transnexus.com is configured only for sending and
receiving non-SSL messages, and issuing signed tokens. If you need help,
post a message on the OSP mailing list of www.sipfoundry.org or send an
e-mail to support@transnexus.com.
The enroll.sh script takes the domain name or IP addresses of the OSP servers
that the OSP Toolkit needs to enroll with as arguments, and then generates pem
files - cacert_#.pem, certreq.pem, localcert.pem, and pkey.pem. The "#" in the
cacert file name is used to differentiate the ca certificate file names for
the various SP's (OSP servers). If only one address is provided at the command
line, cacert_0.pem will be generated. If 2 addresses are provided at the
command line, 2 files will be generated - cacert_0.pem and cacert_1.pem, one
for each SP (OSP server). The example below shows the usage when the client
is registering with osptestserver.transnexus.com.
./enroll.sh osptestserver.transnexus.com
Generating a 512 bit RSA private key
........................++++++++++++
.........++++++++++++
writing new private key to 'pkey.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]: _______
State or Province Name (full name) [Some-State]: _______
Locality Name (eg, city) []:_______
Organization Name (eg, company) [Internet Widgits Pty Ltd]: _______
Organizational Unit Name (eg, section) []:_______
Common Name (eg, YOUR name) []:_______
Email Address []:_______
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:_______
An optional company name []:_______
Error Code returned from openssl command : 0
CA certificate received
[SP: osptestserver.transnexus.com]Error Code returned from getcacert command : 0
output buffer after operation: operation=request
output buffer after nonce: operation=request&nonce=1655976791184458
X509 CertInfo context is null pointer
Unable to get Local Certificate
depth=0 /CN=osptestserver.transnexus.com/O=OSPServer
verify error:num=18:self signed certificate
verify return:1
depth=0 /CN=osptestserver.transnexus.com/O=OSPServer
verify return:1
The certificate request was successful.
Error Code returned from localcert command : 0
The files generated should be copied to the /var/lib/asterisk/keys directory.
Note: The script enroll.sh requires AT&T korn shell (ksh) or any of its
compatible variants. The /usr/src/TK-3_3_6-20060303/bin directory should
be in the PATH variable. Otherwise, enroll.sh cannot find the enroll
file.
3 Asterisk
In Asterisk, all OSP support is implemented as dial plan functions. In
Asterisk V1.6, all combinations of routing between OSP and non-OSP enabled
networks using any combination of SIP, H.323 and IAX protocols are fully
supported. Section 3.1 describes the three easy steps to add OSP support to
Asterisk:
1. Build Asterisk with OSP Toolkit
2. Configure osp.conf file
3. Cut and paste to extensions.conf
Sections 3.2 and 3.3 provide a detailed explanation of OSP dial plan functions
and configuration examples. The detailed information provided in Sections 3.2
and 3.3 is not required for operating Asterisk with OSP, but may be helpful to
developers who want to customize their Asterisk OSP implementation.
3.1 Configure for OSP Support
3.1.1 Build Asterisk with OSP Toolkit
The first step is to build Asterisk with the OSP Toolkit. If the OSP Toolkit
is installed in the default install directory, /usr/local, no additional
configuration is required. Compile Asterisk according to the instructions
provided with the Asterisk distribution.
If the OSP Toolkit is installed in another directory, such as /myosp, Asterisk
must be configured with the location of the OSP Toolkit. See the example
below.
--with-osptk=/myosp
Note: Please change the install path only if you familiar with both the OSP
Toolkit and the Asterisk. Otherwise, the change may result in Asterisk
not supporting the OSP protocol.
3.1.2 osp.conf
The /etc/asterisk/osp.conf file, shown below, contains configuration
parameters for using OSP. Two parameters, servicepoint and source must be
configured. The default values for all other parameters will work well for
standard OSP implementations.
;
; Open Settlement Protocol Sample Configuration File
;
; This file contains configuration of OSP server providers that
; are used by the Asterisk OSP module. The section "general" is
; reserved for global options. All other sections describe specific
; OSP Providers. The provider "default" is used when no provider is
; otherwise specified.
:
: The "servicepoint" and "source" parameters must be configured. For
; most implementations the other parameters in this file can be left
; unchanged.
;
[general]
;
; Enable cryptographic acceleration hardware.
;
accelerate=no
;
; Defines the status of tokens that Asterisk will validate.
; 0 - signed tokens only
; 1 - unsigned tokens only
; 2 - both signed and unsigned
; The default value is 0, i.e. the Asterisk will only validate signed
; tokens.
;
tokenformat=0
;
[default]
;
; List all service points (OSP servers) for this provider. Use
; either domain name or IP address. Most OSP servers use port 1080.
;
;servicepoint=http://osptestserver.transnexus.com:1080/osp
servicepoint=http://OSP server IP:1080/osp
;
; Define the "source" device for requesting OSP authorization.
: This value is usually the domain name or IP address of the
: the Asterisk server.
;
;source=domain name or [IP address in brackets]
source=[host IP]
;
; Define path and file name of crypto files.
; The default path for crypto file is /var/lib/asterisk/keys. If no
; path is defined, crypto files should be in
; /var/lib/asterisk/keys directory.
;
; Specify the private key file name.
; If this parameter is unspecified or not present, the default name
; will be the osp.conf section name followed by "-privatekey.pem"
; (for example: default-privatekey.pem)
;
privatekey=pkey.pem
;
; Specify the local certificate file.
; If this parameter is unspecified or not present, the default name
; will be the osp.conf section name followed by "- localcert.pem "
; (for example: default-localcert.pem)
;
localcert=localcert.pem
;
; Specify one or more Certificate Authority key file names. If none
; are listed, a single Certificate Authority key file name is added
; with the default name of the osp.conf section name followed by
; "-cacert_0.pem " (for example: default-cacert_0.pem)
;
cacert=cacert_0.pem
;
; Configure parameters for OSP communication between Asterisk OSP
; client and OSP servers.
;
; maxconnections: Max number of simultaneous connections to the
; provider OSP server (default=20)
; retrydelay: Extra delay between retries (default=0)
; retrylimit: Max number of retries before giving up (default=2)
; timeout: Timeout for response in milliseconds (default=500)
;
maxconnections=20
retrydelay=0
retrylimit=2
timeout=500
;
; Set the authentication policy.
; 0 - NO - Accept all calls.
; 1 - YES - Accept calls with valid token or no token.
; Block calls with invalid token.
; 2 - EXCLUSIVE - Accept calls with valid token.
; Block calls with invalid token or no token.
; Default is 1,
;
authpolicy=1
;
; Set the default destination protocol. The OSP module supports
; SIP, H323, and IAX protocols. The default protocol is set to SIP.
;
defaultprotocol=SIP
3.1.3 extensions.conf
OSP functions are implemented as dial plan functions in the extensions.conf
file. To add OSP support to your Asterisk server, simply copy and paste the
text box below to your extensions.conf file. These functions will enable your
Asterisk server to support all OSP call scenarios. Configuration of your
Asterisk server for OSP is now complete.
[globals]
DIALOUT=Zap/1
[SrcGW] ; OSP Source Gateway
exten => _XXXX.,1,NoOp(OSPSrcGW)
; Set calling number if necessary
exten => _XXXX.,n,Set(CALLERID(numner)=1234567890)
; OSP lookup using default provider, if fail/error jump to lookup+101
exten => _XXXX.,n(lookup),OSPLookup(${EXTEN}||j)
; Deal with outbound call according to protocol
exten => _XXXX.,n,Macro(outbound)
; Dial to destination, 60 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},60,oL($[${OSPOUTTIMELIMIT}*1000]))
; Wait 1 second
exten => _XXXX.,n,Wait,1
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPLookup fail/error
exten => _XXXX.,lookup+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
[DstGW] ; OSP Destination Gateway
exten => _XXXX.,1,NoOp(OSPDstGW)
; Deal with inbound call according to protocol
exten => _XXXX.,n,Macro(inbound)
; Validate token using default provider, if fail/error jump to auth+101
exten => _XXXX.,n(auth),OSPAuth(|j)
; Ringing
exten => _XXXX.,n,Ringing
; Wait 1 second
exten => _XXXX.,n,Wait,1
; Check inbound call duration limit
exten => _XXXX.,n,GoToIf($[${OSPINTIMELIMIT}=0]?100:200)
; Without duration limit
exten => _XXXX.,100,Dial(${DIALOUT},15,o)
exten => _XXXX.,n,Goto(1000)
; With duration limit
exten => _XXXX.,200,Dial(${DIALOUT},15,oL($[${OSPINTIMELIMIT}*1000]))
exten => _XXXX.,n,Goto(1000)
; Wait 1 second
exten => _XXXX.,1000,Wait,1
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPAuth fail/error
exten => _XXXX.,auth+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
[GeneralProxy] ; Proxy
exten => _XXXX.,1,NoOp(OSP-GeneralProxy)
; Deal with inbound call according to protocol
exten => _XXXX.,n,Macro(inbound)
; Validate token using default provider, if fail/error jump to auth+101
exten => _XXXX.,n(auth),OSPAuth(|j)
; OSP lookup using default provider, if fail/error jump to lookup+101
exten => _XXXX.,n(lookup),OSPLookup(${EXTEN}||j)
; Deal with outbound call according to protocol
exten => _XXXX.,n,Macro(outbound)
; Dial to destination, 14 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},14,oL($[${OSPOUTTIMELIMIT}*1000]))
; OSP lookup next destination using default provider, if fail/error jump to next1+101
exten => _XXXX.,n(next1),OSPNext(${HANGUPCAUSE}||j)
; Deal with outbound call according to protocol
exten => _XXXX.,n,Macro(outbound)
; Dial to destination, 15 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},15,oL($[${OSPOUTTIMELIMIT}*1000]))
; OSP lookup next destination using default provider, if fail/error jump to next2+101
exten => _XXXX.,n(next2),OSPNext(${HANGUPCAUSE}||j)
; Deal with outbound call according to protocol
exten => _XXXX.,n,Macro(outbound)
; Dial to destination, 16 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},16,oL($[${OSPOUTTIMELIMIT}*1000]))
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPAuth fail/error
exten => _XXXX.,auth+101,Hangup
; Deal with OSPLookup fail/error
exten => _XXXX.,lookup+101,Hangup
; Deal with OSPNext fail/error
exten => _XXXX.,next1+101,Hangup
; Deal with OSPNext fail/error
exten => _XXXX.,next2+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
[macro-inbound]
exten => s,1,NoOp(inbound)
; Get inbound protocol
exten => s,n,Set(CHANTECH=${CUT(CHANNEL,/,1)})
exten => s,n,GoToIf($["${CHANTECH}"="H323"]?100)
exten => s,n,GoToIf($["${CHANTECH}"="IAX2"]?200)
exten => s,n,GoToIf($["${CHANTECH}"="SIP"]?300)
exten => s,n,GoTo(1000)
; H323 --------------------------------------------------------
; Get peer IP
exten => s,100,Set(OSPPEERIP=${H323CHANINFO(peerip)})
; Get OSP token
exten => s,n,Set(OSPINTOKEN=${H323CHANINFO(osptoken)})
exten => s,n,GoTo(1000)
; IAX ----------------------------------------------------------
; Get peer IP
exten => s,200,Set(OSPPEERIP=${IAXPEER(CURRENTCHANNEL)})
; Get OSP token
exten => s,n,Set(OSPINTOKEN=${IAXCHANINFO(osptoken)})
exten => s,n,GoTo(1000)
; SIP ----------------------------------------------------------
; Get peer IP
exten => s,300,Set(OSPPEERIP=${SIPCHANINFO(peerip)})
; Get OSP token
exten => s,n,Set(OSPINTOKEN=${SIP_HEADER(P-OSP-Auth-Token)})
exten => s,n,GoTo(1000)
; --------------------------------------------------------------
exten => s,1000,MacroExit
[macro-outbound]
exten => s,1,NoOp(outbound)
; Set calling number which may be translated
exten => s,n,Set(CALLERID(number)=${OSPCALLING})
; Check destinatio protocol
exten => s,n,GoToIf($["${OSPTECH}"="H323"]?100)
exten => s,n,GoToIf($["${OSPTECH}"="IAX2"]?200)
exten => s,n,GoToIf($["${OSPTECH}"="SIP"]?300)
; Something wrong
exten => s,n,Hangup
exten => s,n,GoTo(1000)
; H323 --------------------------------------------------------
; Set call id
exten => s,100,Set(H323CHANINFO(callid)=${OSPOUTCALLID})
; Set OSP token
exten => s,n,Set(H323CHANINFO(osptoken)=${OSPOUTTOKEN})
exten => s,n,GoTo(1000)
; IAX ----------------------------------------------------------
; Set OSP token
exten => s,200,Set(IAXCHANINFO(osptoken)=${OSPOUTTOKEN})
exten => s,n,GoTo(1000)
; SIP ----------------------------------------------------------
exten => s,300,GoTo(1000)
; --------------------------------------------------------------
exten => s,1000,MacroExit
3.1.4 zapata/sip/iax/h323/ooh323.conf
There is no configuration required for OSP.
3.2 OSP Dial Plan Functions
This section provides a description of each OSP dial plan function.
3.2.1 OSPAuth
OSP token validation function.
Input:
* OSPPEERIP: last hop IP address
* OSPINTOKEN: inbound OSP token
* provider: OSP service provider configured in osp.conf. If it is empty, default provider is used.
* priority jump
Output:
* OSPINHANDLE: inbound OSP transaction handle
* OSPINTIMELIMIT: inbound call duration limit
* OSPAUTHSTATUS: OSPAuth return value. SUCCESS/FAILED/ERROR
3.2.2 OSPLookup
OSP lookup function.
Input:
* OSPPEERIP: last hop IP address
* OSPINHANDLE: inbound OSP transaction handle
* OSPINTIMELIMIT: inbound call duration limit
* exten: called number
* provider: OSP service provider configured in osp.conf. If it is empty, default provider is used.
* priority jump
* callidtypes: Generate call ID for the outbound call. h: H.323; s: SIP; i: IAX. Only h, H.323, has been implemented.
Output:
* OSPOUTHANDLE: outbound transaction handle
* OSPTECH: outbound protocol
* OSPDEST: outbound destination IP address
* OSPCALLED: outbound called nummber
* OSPCALLING: outbound calling number
* OSPOUTTOKEN: outbound OSP token
* OSPRESULTS: number of remaining destinations
* OSPOUTTIMELIMIT: outbound call duration limit
* OSPOUTCALLIDTYPES: same as input callidtypes
* OSPOUTCALLID: outbound call ID. Only for H.323
* OSPDIALSTR: outbound dial string
* OSPLOOKUPSTATUS: OSPLookup return value. SUCCESS/FAILED/ERROR
3.2.3 OSPNext
OSP lookup next function.
Input:
* OSPINHANDLE: inbound transaction handle
* OSPOUTHANDLE: outbound transaction handle
* OSPINTIMELIMIT: inbound call duration limit
* OSPOUTCALLIDTYPES: types of call ID generated by Asterisk.
* OSPRESULTS: number of remain destinations
* cause: last destination disconnect cause
* priority jump
Output:
* OSPTECH: outbound protocol
* OSPDEST: outbound destination IP address
* OSPCALLED: outbound called number
* OSPCALLING: outbound calling number
* OSPOUTTOKEN: outbound OSP token
* OSPRESULTS: number of remain destinations
* OSPOUTTIMELIMIT: outbound call duration limit
* OSPOUTCALLID: outbound call ID. Only for H.323
* OSPDIALSTR: outbound dial string
* OSPNEXTSTATUS: OSPLookup return value. SUCCESS/FAILED/ERROR
3.2.4 OSPFinish
OSP report usage function.
Input:
* OSPINHANDLE: inbound transaction handle
* OSPOUTHANDLE: outbound transaction handle
* OSPAUTHSTATUS: OSPAuth return value
* OSPLOOKUPTSTATUS: OSPLookup return value
* OSPNEXTSTATUS: OSPNext return value
* cause: last destination disconnect cause
* priority jump
Output:
* OSPFINISHSTATUS: OSPLookup return value. SUCCESS/FAILED/ERROR
3.3 extensions.conf Examples
The extensions.conf file example provided in Section 3.1 is designed to
handle all OSP call scenarios when Asterisk is used as a source or destination
gateway to the PSTN or as a proxy between VoIP networks. The extenstion.conf
examples in this section are designed for specific use cases only.
3.3.1 Source Gateway
The examples in this section apply when the Asterisk server is being used as
a TDM to VoIP gateway. Calls originate on the TDM network and are converted
to VoIP by Asterisk. In these cases, the Asterisk server queries an OSP
server to find a route to a VoIP destination. When the call ends, Asterisk
sends a CDR to the OSP server.
For SIP protocol.
[SIPSrcGW]
exten => _XXXX.,1,NoOp(SIPSrcGW)
; Set calling number if necessary
exten => _XXXX.,n,Set(CALLERID(numner)=CallingNumber)
; OSP lookup using default provider, if fail/error jump to lookup+101
exten => _XXXX.,n(lookup),OSPLookup(${EXTEN}||j)
; Set calling number which may be translated
exten => _XXXX.,n,Set(CALLERID(number)=${OSPCALLING})
; Dial to destination, 60 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},60,oL($[${OSPOUTTIMELIMIT}*1000]))
; Wait 3 seconds
exten => _XXXX.,n,Wait,3
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPLookup fail/error
exten => _XXXX.,lookup+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
For IAX protocol.
[IAXSrcGW]
exten => _XXXX.,1,NoOp(IAXSrcGW)
; Set calling number if necessary
exten => _XXXX.,n,Set(CALLERID(numner)=CallingNumber)
; OSP lookup using default provider, if fail/error jump to lookup+101
exten => _XXXX.,n(lookup),OSPLookup(${EXTEN}||j)
; Set outbound OSP token
exten => _XXXX.,n,Set(IAXCHANINFO(osptoken)=${OSPOUTTOKEN})
; Set calling number which may be translated
exten => _XXXX.,n,Set(CALLERID(number)=${OSPCALLING})
; Dial to destination, 60 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},60,oL($[${OSPOUTTIMELIMIT}*1000]))
; Wait 3 seconds
exten => _XXXX.,n,Wait,3
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPLookup fail/error
exten => _XXXX.,lookup+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
For H.323 protocol.
[H323SrcGW]
exten => _XXXX.,1,NoOp(H323SrcGW)
; Set calling number if necessary
exten => _XXXX.,n,Set(CALLERID(numner)=CallingNumber)
; OSP lookup using default provider, if fail/error jump to lookup+101
; "h" parameter is used to generate a call id
; Cisco OSP gateways use this call id to validate OSP token
exten => _XXXX.,n(lookup),OSPLookup(${EXTEN}||jh)
; Set outbound call id
exten => _XXXX.,n,Set(OH323CHANINFO(callid)=${OSPOUTCALLID})
; Set outbound OSP token
exten => _XXXX.,n,Set(OH323CHANINFO(osptoken)=${OSPOUTTOKEN})
; Set calling number which may be translated
exten => _XXXX.,n,Set(CALLERID(number)=${OSPCALLING})
; Dial to destination, 60 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},60,oL($[${OSPOUTTIMELIMIT}*1000]))
; Wait 3 seconds
exten => _XXXX.,n,Wait,3
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPLookup fail/error
exten => _XXXX.,lookup+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
3.3.2 Destination Gateway
The examples in this section apply when Asterisk is being used as a VoIP to
TDM gateway. VoIP calls are received by Asterisk which validates the OSP
peering token and completes to the TDM network. After the call ends,
Asterisk sends a CDR to the OSP server.
For SIP protocol
[SIPDstGW]
exten => _XXXX.,1,NoOp(SIPDstGW)
; Get peer IP
exten => _XXXX.,n,Set(OSPPEERIP=${SIPCHANINFO(peerip)})
; Get OSP token
exten => _XXXX.,n,Set(OSPINTOKEN=${SIP_HEADER(P-OSP-Auth-Token)})
; Validate token using default provider, if fail/error jump to auth+101
exten => _XXXX.,n(auth),OSPAuth(|j)
; Ringing
exten => _XXXX.,n,Ringing
; Wait 1 second
exten => _XXXX.,n,Wait,1
; Dial phone, timeout 15 seconds, with call duration limit
exten => _XXXX.,n,Dial(${DIALOUTANALOG}/${EXTEN:1},15,oL($[${OSPINTIMELIMIT}*1000]))
; Wait 3 seconds
exten => _XXXX.,n,Wait,3
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPAuth fail/error
exten => _XXXX.,auth+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
For IAX protocol
[IAXDstGW]
exten => _XXXX.,1,NoOp(IAXDstGW)
; Get peer IP
exten => _XXXX.,n,Set(OSPPEERIP=${IAXPEER(CURRENTCHANNEL)})
; Get OSP token
exten => _XXXX.,n,Set(OSPINTOKEN=${IAXCHANINFO(osptoken)})
; Validate token using default provider, if fail/error jump to auth+101
exten => _XXXX.,n(auth),OSPAuth(|j)
; Ringing
exten => _XXXX.,n,Ringing
; Wait 1 second
exten => _XXXX.,n,Wait,1
; Dial phone, timeout 15 seconds, with call duration limit
exten => _XXXX.,n,Dial(${DIALOUTANALOG}/${EXTEN:1},15,oL($[${OSPINTIMELIMIT}*1000]))
; Wait 3 seconds
exten => _XXXX.,n,Wait,3
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPAuth fail/error
exten => _XXXX.,auth+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
For H.323 protocol
[H323DstGW]
exten => _XXXX.,1,NoOp(H323DstGW)
; Get peer IP
exten => _XXXX.,n,Set(OSPPEERIP=${H323CHANINFO(peerip)})
; Get OSP token
exten => _XXXX.,n,Set(OSPINTOKEN=${H323CHANINFO(osptoken)})
; Validate token using default provider, if fail/error jump to auth+101
exten => _XXXX.,n(auth),OSPAuth(|j)
; Ringing
exten => _XXXX.,n,Ringing
; Wait 1 second
exten => _XXXX.,n,Wait,1
; Dial phone, timeout 15 seconds, with call duration limit
exten => _XXXX.,n,Dial(${DIALOUTANALOG}/${EXTEN:1},15,oL($[${OSPINTIMELIMIT}*1000]))
; Wait 3 seconds
exten => _XXXX.,n,Wait,3
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPAuth fail/error
exten => _XXXX.,auth+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
3.3.3 Proxy
The example in this section applies when Asterisk is a proxy between two VoIP networks.
[GeneralProxy]
exten => _XXXX.,1,NoOp(GeneralProxy)
; Get peer IP and inbound OSP token
; SIP, un-comment the following two lines.
;exten => _XXXX.,n,Set(OSPPEERIP=${SIPCHANINFO(peerip)})
;exten => _XXXX.,n,Set(OSPINTOKEN=${SIP_HEADER(P-OSP-Auth-Token)})
; IAX, un-comment the following 2 lines
;exten => _XXXX.,n,Set(OSPPEERIP=${IAXPEER(CURRENTCHANNEL)})
;exten => _XXXX.,n,Set(OSPINTOKEN=${IAXCHANINFO(osptoken)})
; H323, un-comment the following two lines.
;exten => _XXXX.,n,Set(OSPPEERIP=${OH323CHANINFO(peerip)})
;exten => _XXXX.,n,Set(OSPINTOKEN=${OH323CHANINFO(osptoken)})
;---------------------------------------------------------------
; Validate token using default provider, if fail/error jump to auth+101
exten => _XXXX.,n(auth),OSPAuth(|j)
; OSP lookup using default provider, if fail/error jump to lookup+101
; "h" parameter is used to generate a call id for H.323 destinations
; Cisco OSP gateways use this call id to validate OSP token
exten => _XXXX.,n(lookup),OSPLookup(${EXTEN}||jh)
; Set outbound call id and OSP token
; IAX, un-comment the following line.
;exten => _XXXX.,n,Set(IAXCHANINFO(osptoken)=${OSPOUTTOKEN})
; H323, un-comment the following two lines.
;exten => _XXXX.,n,Set(OH323CHANINFO(callid)=${OSPOUTCALLID})
;exten => _XXXX.,n,Set(OH323CHANINFO(osptoken)=${OSPOUTTOKEN})
;---------------------------------------------------------------
; Set calling number which may be translated
exten => _XXXX.,n,Set(CALLERID(number)=${OSPCALLING})
; Dial to destination, 14 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},14,oL($[${OSPOUTTIMELIMIT}*1000]))
; OSP lookup next destination using default provider, if fail/error jump to next1+101
exten => _XXXX.,n(next1),OSPNext(${HANGUPCAUSE}||j)
; Set outbound call id and OSP token
; IAX, un-comment the following line.
;exten => _XXXX.,n,Set(IAXCHANINFO(osptoken)=${OSPOUTTOKEN})
; H323, un-comment the following two lines.
;exten => _XXXX.,n,Set(OH323CHANINFO(callid)=${OSPOUTCALLID})
;exten => _XXXX.,n,Set(OH323CHANINFO(osptoken)=${OSPOUTTOKEN})
;---------------------------------------------------------------
; Set calling number which may be translated
exten => _XXXX.,n,Set(CALLERID(number)=${OSPCALLING})
; Dial to destination, 15 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},15,oL($[${OSPOUTTIMELIMIT}*1000]))
; OSP lookup next destination using default provider, if fail/error jump to next2+101
exten => _XXXX.,n(next2),OSPNext(${HANGUPCAUSE}||j)
; Set outbound call id and OSP token
; IAX, un-comment the following line.
;exten => _XXXX.,n,Set(IAXCHANINFO(osptoken)=${OSPOUTTOKEN})
; H323, un-comment the following two lines.
;exten => _XXXX.,n,Set(OH323CHANINFO(callid)=${OSPOUTCALLID})
;exten => _XXXX.,n,Set(OH323CHANINFO(osptoken)=${OSPOUTTOKEN})
;---------------------------------------------------------------
; Set calling number which may be translated
exten => _XXXX.,n,Set(CALLERID(number)=${OSPCALLING})
; Dial to destination, 16 timeout, with call duration limit
exten => _XXXX.,n,Dial(${OSPDIALSTR},16,oL($[${OSPOUTTIMELIMIT}*1000]))
; Hangup
exten => _XXXX.,n,Hangup
; Deal with OSPAuth fail/error
exten => _XXXX.,auth+101,Hangup
; Deal with OSPLookup fail/error
exten => _XXXX.,lookup+101,Hangup
; Deal with 1st OSPNext fail/error
exten => _XXXX.,next1+101,Hangup
; Deal with 2nd OSPNext fail/error
exten => _XXXX.,next2+101,Hangup
exten => h,1,NoOp()
; OSP report usage
exten => h,n,OSPFinish(${HANGUPCAUSE})
Reference in New Issue View Git Blame Copy Permalink