Files
asterisk/include/asterisk/tcptls.h
Mark Michelson c7b23cbb0a Do not use a FILE handle when doing SIP TCP reads.
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.

This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.

Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.

Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.

(closes issue ASTERISK-20212)
reported by Phil Ciccone

Review: https://reviewboard.asterisk.org/r/2123
........

Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
........

Merged revisions 374914 from http://svn.asterisk.org/svn/asterisk/branches/11


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-10-12 16:31:01 +00:00

233 lines
8.3 KiB
C

/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 1999 - 2006, Digium, Inc.
*
* Mark Spencer <markster@digium.com>
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*!
* \file tcptls.h
*
* \brief Generic support for tcp/tls servers in Asterisk.
* \note In order to have TLS/SSL support, we need the openssl libraries.
* Still we can decide whether or not to use them by commenting
* in or out the DO_SSL macro.
*
* TLS/SSL support is basically implemented by reading from a config file
* (currently manager.conf, http.conf and sip.conf) the names of the certificate
* files and cipher to use, and then run ssl_setup() to create an appropriate
* data structure named ssl_ctx.
*
* If we support multiple domains, presumably we need to read multiple
* certificates.
*
* When we are requested to open a TLS socket, we run make_file_from_fd()
* on the socket, to do the necessary setup. At the moment the context's name
* is hardwired in the function, but we can certainly make it into an extra
* parameter to the function.
*
* We declare most of ssl support variables unconditionally,
* because their number is small and this simplifies the code.
*
* \note The ssl-support variables (ssl_ctx, do_ssl, certfile, cipher)
* and their setup should be moved to a more central place, e.g. asterisk.conf
* and the source files that processes it. Similarly, ssl_setup() should
* be run earlier in the startup process so modules have it available.
*
* \ref AstTlsOverview
*
* \todo For SIP, the SubjectAltNames should be checked on verification
* of the certificate. (Check RFC 5922)
*
*/
#ifndef _ASTERISK_TCPTLS_H
#define _ASTERISK_TCPTLS_H
#include "asterisk/netsock2.h"
#include "asterisk/utils.h"
#if defined(HAVE_OPENSSL) && (defined(HAVE_FUNOPEN) || defined(HAVE_FOPENCOOKIE))
#define DO_SSL /* comment in/out if you want to support ssl */
#endif
#ifdef DO_SSL
#include <openssl/ssl.h>
#include <openssl/err.h>
#else
/* declare dummy types so we can define a pointer to them */
typedef struct {} SSL;
typedef struct {} SSL_CTX;
#endif /* DO_SSL */
/*! SSL support */
#define AST_CERTFILE "asterisk.pem"
enum ast_ssl_flags {
/*! Verify certificate when acting as server */
AST_SSL_VERIFY_CLIENT = (1 << 0),
/*! Don't verify certificate when connecting to a server */
AST_SSL_DONT_VERIFY_SERVER = (1 << 1),
/*! Don't compare "Common Name" against IP or hostname */
AST_SSL_IGNORE_COMMON_NAME = (1 << 2),
/*! Use SSLv2 for outgoing client connections */
AST_SSL_SSLV2_CLIENT = (1 << 3),
/*! Use SSLv3 for outgoing client connections */
AST_SSL_SSLV3_CLIENT = (1 << 4),
/*! Use TLSv1 for outgoing client connections */
AST_SSL_TLSV1_CLIENT = (1 << 5)
};
struct ast_tls_config {
int enabled;
char *certfile;
char *pvtfile;
char *cipher;
char *cafile;
char *capath;
struct ast_flags flags;
SSL_CTX *ssl_ctx;
};
/*! \page AstTlsOverview TLS Implementation Overview
*
* The following code implements a generic mechanism for starting
* services on a TCP or TLS socket.
* The service is configured in the struct session_args, and
* then started by calling server_start(desc) on the descriptor.
* server_start() first verifies if an instance of the service is active,
* and in case shuts it down. Then, if the service must be started, creates
* a socket and a thread in charge of doing the accept().
*
* The body of the thread is desc->accept_fn(desc), which the user can define
* freely. We supply a sample implementation, server_root(), structured as an
* infinite loop. At the beginning of each iteration it runs periodic_fn()
* if defined (e.g. to perform some cleanup etc.) then issues a poll()
* or equivalent with a timeout of 'poll_timeout' milliseconds, and if the
* following accept() is successful it creates a thread in charge of
* running the session, whose body is desc->worker_fn(). The argument of
* worker_fn() is a struct ast_tcptls_session_instance, which contains the address
* of the other party, a pointer to desc, the file descriptors (fd) on which
* we can do a select/poll (but NOT I/O), and a FILE *on which we can do I/O.
* We have both because we want to support plain and SSL sockets, and
* going through a FILE * lets us provide the encryption/decryption
* on the stream without using an auxiliary thread.
*/
/*! \brief
* arguments for the accepting thread
*/
struct ast_tcptls_session_args {
struct ast_sockaddr local_address;
struct ast_sockaddr old_address; /*!< copy of the local or remote address depending on if its a client or server session */
struct ast_sockaddr remote_address;
char hostname[MAXHOSTNAMELEN]; /*!< only necessary for SSL clients so we can compare to common name */
struct ast_tls_config *tls_cfg; /*!< points to the SSL configuration if any */
int accept_fd;
int poll_timeout;
/*! Server accept_fn thread ID used for external shutdown requests. */
pthread_t master;
void *(*accept_fn)(void *); /*!< the function in charge of doing the accept */
void (*periodic_fn)(void *);/*!< something we may want to run before after select on the accept socket */
void *(*worker_fn)(void *); /*!< the function in charge of doing the actual work */
const char *name;
};
/*! \brief
* describes a server instance
*/
struct ast_tcptls_session_instance {
FILE *f; /*!< fopen/funopen result */
int fd; /*!< the socket returned by accept() */
SSL *ssl; /*!< ssl state */
/* iint (*ssl_setup)(SSL *); */
int client;
struct ast_sockaddr remote_address;
struct ast_tcptls_session_args *parent;
/* Sometimes, when an entity reads TCP data, multiple
* logical messages might be read at the same time. In such
* a circumstance, there needs to be a place to stash the
* extra data.
*/
struct ast_str *overflow_buf;
};
#if defined(HAVE_FUNOPEN)
#define HOOK_T int
#define LEN_T int
#else
#define HOOK_T ssize_t
#define LEN_T size_t
#endif
/*!
* \brief attempts to connect and start tcptls session, on error the tcptls_session's
* ref count is decremented, fd and file are closed, and NULL is returned.
*/
struct ast_tcptls_session_instance *ast_tcptls_client_start(struct ast_tcptls_session_instance *tcptls_session);
/* \brief Creates a client connection's ast_tcptls_session_instance. */
struct ast_tcptls_session_instance *ast_tcptls_client_create(struct ast_tcptls_session_args *desc);
void *ast_tcptls_server_root(void *);
/*!
* \brief Closes a tcptls session instance's file and/or file descriptor.
* The tcptls_session will be set to NULL and it's file descriptor will be set to -1
* by this function.
*/
void ast_tcptls_close_session_file(struct ast_tcptls_session_instance *tcptls_session);
/*!
* \brief This is a generic (re)start routine for a TCP server,
* which does the socket/bind/listen and starts a thread for handling
* accept().
* \version 1.6.1 changed desc parameter to be of ast_tcptls_session_args type
*/
void ast_tcptls_server_start(struct ast_tcptls_session_args *desc);
/*!
* \brief Shutdown a running server if there is one
* \version 1.6.1 changed desc parameter to be of ast_tcptls_session_args type
*/
void ast_tcptls_server_stop(struct ast_tcptls_session_args *desc);
/*!
* \brief Set up an SSL server
*
* \param cfg Configuration for the SSL server
* \retval 1 Success
* \retval 0 Failure
*/
int ast_ssl_setup(struct ast_tls_config *cfg);
/*!
* \brief free resources used by an SSL server
*
* \note This only needs to be called if ast_ssl_setup() was
* directly called first.
* \param cfg Configuration for the SSL server
*/
void ast_ssl_teardown(struct ast_tls_config *cfg);
/*!
* \brief Used to parse conf files containing tls/ssl options.
*/
int ast_tls_read_conf(struct ast_tls_config *tls_cfg, struct ast_tcptls_session_args *tls_desc, const char *varname, const char *value);
HOOK_T ast_tcptls_server_read(struct ast_tcptls_session_instance *ser, void *buf, size_t count);
HOOK_T ast_tcptls_server_write(struct ast_tcptls_session_instance *ser, const void *buf, size_t count);
#endif /* _ASTERISK_TCPTLS_H */