diff --git a/libs/iksemel/build/texinfo.tex b/libs/iksemel/build/texinfo.tex
index e758cedae7..ff2c40654b 100644
--- a/libs/iksemel/build/texinfo.tex
+++ b/libs/iksemel/build/texinfo.tex
@@ -3,10 +3,10 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2004-09-06.16}
+\def\texinfoversion{2005-07-05.19}
 %
 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
 % Foundation, Inc.
 %
 % This texinfo.tex file is free software; you can redistribute it and/or
@@ -21,8 +21,8 @@
 %
 % You should have received a copy of the GNU General Public License
 % along with this texinfo.tex file; see the file COPYING.  If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
+% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+% Boston, MA 02110-1301, USA.
 %
 % As a special exception, when this file is read by TeX when processing
 % a Texinfo source document, you may use the result without
@@ -89,10 +89,11 @@
 \let\ptexhat=^
 \let\ptexi=\i
 \let\ptexindent=\indent
-\let\ptexnoindent=\noindent
 \let\ptexinsert=\insert
 \let\ptexlbrace=\{
 \let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
 \let\ptexplus=+
 \let\ptexrbrace=\}
 \let\ptexslash=\/
@@ -154,10 +155,12 @@
 
 % In some macros, we cannot use the `\? notation---the left quote is
 % in some cases the escape char.
+\chardef\backChar  = `\\
 \chardef\colonChar = `\:
 \chardef\commaChar = `\,
 \chardef\dotChar   = `\.
 \chardef\exclamChar= `\!
+\chardef\plusChar  = `\+
 \chardef\questChar = `\?
 \chardef\semiChar  = `\;
 \chardef\underChar = `\_
@@ -166,6 +169,12 @@
 \chardef\spacecat = 10
 \def\spaceisspace{\catcode\spaceChar=\spacecat}
 
+{% for help with debugging.
+ % example usage: \expandafter\show\activebackslash
+ \catcode`\! = 0 \catcode`\\ = \active
+ !global!def!activebackslash{\}
+}
+
 % Ignore a token.
 %
 \def\gobble#1{}
@@ -301,10 +310,7 @@
     % take effect in \write's, yet the group defined by the \vbox ends
     % before the \shipout runs.
     %
-    \escapechar = `\\     % use backslash in output files.
     \indexdummies         % don't expand commands in the output.
-    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
-                   % the page break happens to be in the middle of an example.
     \shipout\vbox{%
       % Do this early so pdf references go to the beginning of the page.
       \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
@@ -355,7 +361,7 @@
       \egroup % \vbox from first cropmarks clause
       \fi
     }% end of \shipout\vbox
-  }% end of group with \normalturnoffactive
+  }% end of group with \indexdummies
   \advancepageno
   \ifnum\outputpenalty>-20000 \else\dosupereject\fi
 }
@@ -565,7 +571,7 @@
 \let\}=\myrbrace
 \begingroup
   % Definitions to produce \{ and \} commands for indices,
-  % and @{ and @} for the aux file.
+  % and @{ and @} for the aux/toc files.
   \catcode`\{ = \other \catcode`\} = \other
   \catcode`\[ = 1 \catcode`\] = 2
   \catcode`\! = 0 \catcode`\\ = \other
@@ -646,13 +652,28 @@
 \let\/=\allowbreak
 
 % @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
 
 % @! is an end-of-sentence bang.
-\def\!{!\spacefactor=3000 }
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
 
 % @? is an end-of-sentence query.
-\def\?{?\spacefactor=3000 }
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+% 
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+  \fi\fi
+}
 
 % @w prevents a word break.  Without the \leavevmode, @w at the
 % beginning of a paragraph, when TeX is still in vertical mode, would
@@ -1091,7 +1112,7 @@ where each line of input produces a line of output.}
 %
 \def\enddots{%
   \dots
-  \spacefactor=3000
+  \spacefactor=\endofsentencespacefactor
 }
 
 % @comma{} is so commas can be inserted into text without messing up
@@ -1175,7 +1196,62 @@ where each line of input produces a line of output.}
     \fi
   \fi
 \fi
-%
+
+% PDF uses PostScript string constants for the names of xref targets, to
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
+% (and related messages, the final outcome is that it is up to the TeX
+% user to double the backslashes and otherwise make the string valid, so
+% that's we do).
+
+% double active backslashes.
+% 
+{\catcode`\@=0 \catcode`\\=\active
+ @gdef@activebackslash{@catcode`@\=@active @otherbackslash}
+ @gdef@activebackslashdouble{%
+   @catcode@backChar=@active
+   @let\=@doublebackslash}
+}
+
+% To handle parens, we must adopt a different approach, since parens are
+% not active characters.  hyperref.dtx (which has the same problem as
+% us) handles it with this amazing macro to replace tokens.  I've
+% tinkered with it a little for texinfo, but it's definitely from there.
+% 
+% #1 is the tokens to replace.
+% #2 is the replacement.
+% #3 is the control sequence with the string.
+% 
+\def\HyPsdSubst#1#2#3{%
+  \def\HyPsdReplace##1#1##2\END{%
+    ##1%
+    \ifx\\##2\\%
+    \else
+      #2%
+      \HyReturnAfterFi{%
+        \HyPsdReplace##2\END
+      }%
+    \fi
+  }%
+  \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
+}
+\long\def\HyReturnAfterFi#1\fi{\fi#1}
+
+% #1 is a control sequence in which to do the replacements.
+\def\backslashparens#1{%
+  \xdef#1{#1}% redefine it as its expansion; the definition is simply
+             % \lastnode when called from \setref -> \pdfmkdest.
+  \HyPsdSubst{(}{\backslashlparen}{#1}%
+  \HyPsdSubst{)}{\backslashrparen}{#1}%
+}
+
+{\catcode\exclamChar = 0 \catcode\backChar = \other
+ !gdef!backslashlparen{\(}%
+ !gdef!backslashrparen{\)}%
+}
+
 \ifpdf
   \input pdfcolor
   \pdfcatalog{/PageMode /UseOutlines}%
@@ -1200,13 +1276,18 @@ where each line of input produces a line of output.}
       \pdfrefximage \pdflastximage
     \fi}
   \def\pdfmkdest#1{{%
-    % We have to set dummies so commands such as @code in a section title
-    % aren't expanded.
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
     \atdummies
-    \normalturnoffactive
-    \pdfdest name{#1} xyz%
-  }}
-  \def\pdfmkpgn#1{#1}
+    \activebackslashdouble
+    \def\pdfdestname{#1}%
+    \backslashparens\pdfdestname
+    \pdfdest name{\pdfdestname} xyz%
+  }}%
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}%
+  %
   \let\linkcolor = \Blue  % was Cyan, but that seems light?
   \def\endlink{\Black\pdfendlink}
   % Adding outlines to PDF; macros for calculating structure of outlines
@@ -1217,20 +1298,31 @@ where each line of input produces a line of output.}
     \advance\tempnum by 1
     \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
   %
-  % #1 is the section text.  #2 is the pdf expression for the number
-  % of subentries (or empty, for subsubsections).  #3 is the node
-  % text, which might be empty if this toc entry had no
-  % corresponding node.  #4 is the page number.
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
   %
   \def\dopdfoutline#1#2#3#4{%
     % Generate a link to the node text if that exists; else, use the
     % page number.  We could generate a destination for the section
     % text in the case where a section has no node, but it doesn't
-    % seem worthwhile, since most documents are normally structured.
+    % seem worth the trouble, since most documents are normally structured.
     \def\pdfoutlinedest{#3}%
-    \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      % Doubled backslashes in the name.
+      {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
+       \backslashparens\pdfoutlinedest}%
+    \fi
     %
-    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
+    % Also double the backslashes in the display string.
+    {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
+     \backslashparens\pdfoutlinetext}%
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
   }
   %
   \def\pdfmakeoutlines{%
@@ -1242,13 +1334,13 @@ where each line of input produces a line of output.}
       % Read toc silently, to get counts of subentries for \pdfoutline.
       \def\numchapentry##1##2##3##4{%
 	\def\thischapnum{##2}%
-	\let\thissecnum\empty
-	\let\thissubsecnum\empty
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
       }%
       \def\numsecentry##1##2##3##4{%
 	\advancenumber{chap\thischapnum}%
 	\def\thissecnum{##2}%
-	\let\thissubsecnum\empty
+	\def\thissubsecnum{0}%
       }%
       \def\numsubsecentry##1##2##3##4{%
 	\advancenumber{sec\thissecnum}%
@@ -1257,9 +1349,9 @@ where each line of input produces a line of output.}
       \def\numsubsubsecentry##1##2##3##4{%
 	\advancenumber{subsec\thissubsecnum}%
       }%
-      \let\thischapnum\empty
-      \let\thissecnum\empty
-      \let\thissubsecnum\empty
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
       %
       % use \def rather than \let here because we redefine \chapentry et
       % al. a second time, below.
@@ -1271,7 +1363,7 @@ where each line of input produces a line of output.}
       \def\unnsecentry{\numsecentry}%
       \def\unnsubsecentry{\numsubsecentry}%
       \def\unnsubsubsecentry{\numsubsubsecentry}%
-      \input \jobname.toc
+      \readdatafile{toc}%
       %
       % Read toc second time, this time actually producing the outlines.
       % The `-' means take the \expnumber as the absolute number of
@@ -1297,41 +1389,12 @@ where each line of input produces a line of output.}
       % their "best" equivalent, based on the @documentencoding.  Right
       % now, I guess we'll just let the pdf reader have its way.
       \indexnofonts
-      \turnoffactive
+      \setupdatafile
+      \activebackslash
       \input \jobname.toc
     \endgroup
   }
   %
-  \def\makelinks #1,{%
-    \def\params{#1}\def\E{END}%
-    \ifx\params\E
-      \let\nextmakelinks=\relax
-    \else
-      \let\nextmakelinks=\makelinks
-      \ifnum\lnkcount>0,\fi
-      \picknum{#1}%
-      \startlink attr{/Border [0 0 0]}
-        goto name{\pdfmkpgn{\the\pgn}}%
-      \linkcolor #1%
-      \advance\lnkcount by 1%
-      \endlink
-    \fi
-    \nextmakelinks
-  }
-  \def\picknum#1{\expandafter\pn#1}
-  \def\pn#1{%
-    \def\p{#1}%
-    \ifx\p\lbrace
-      \let\nextpn=\ppn
-    \else
-      \let\nextpn=\ppnn
-      \def\first{#1}
-    \fi
-    \nextpn
-  }
-  \def\ppn#1{\pgn=#1\gobble}
-  \def\ppnn{\pgn=\first}
-  \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
@@ -1406,7 +1469,7 @@ where each line of input produces a line of output.}
 \def\rm{\fam=0 \setfontstyle{rm}}
 \def\it{\fam=\itfam \setfontstyle{it}}
 \def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
 \def\tt{\fam=\ttfam \setfontstyle{tt}}
 
 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
@@ -1468,17 +1531,10 @@ where each line of input produces a line of output.}
 \def\scbshape{csc}
 
 % Text fonts (11.2pt, magstep1).
-\newcount\mainmagstep
-\ifx\bigger\relax
-  % not really supported.
-  \mainmagstep=\magstep1
-  \setfont\textrm\rmshape{12}{1000}
-  \setfont\texttt\ttshape{12}{1000}
-\else
-  \mainmagstep=\magstephalf
-  \setfont\textrm\rmshape{10}{\mainmagstep}
-  \setfont\texttt\ttshape{10}{\mainmagstep}
-\fi
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
 \setfont\textbf\bfshape{10}{\mainmagstep}
 \setfont\textit\itshape{10}{\mainmagstep}
 \setfont\textsl\slshape{10}{\mainmagstep}
@@ -1495,6 +1551,7 @@ where each line of input produces a line of output.}
 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
 
 % Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
 \setfont\smallrm\rmshape{9}{1000}
 \setfont\smalltt\ttshape{9}{1000}
 \setfont\smallbf\bfshape{10}{900}
@@ -1507,6 +1564,7 @@ where each line of input produces a line of output.}
 \font\smallsy=cmsy9
 
 % Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
 \setfont\smallerrm\rmshape{8}{1000}
 \setfont\smallertt\ttshape{8}{1000}
 \setfont\smallerbf\bfshape{10}{800}
@@ -1519,6 +1577,7 @@ where each line of input produces a line of output.}
 \font\smallersy=cmsy8
 
 % Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
 \setfont\titlerm\rmbshape{12}{\magstep3}
 \setfont\titleit\itbshape{10}{\magstep4}
 \setfont\titlesl\slbshape{10}{\magstep4}
@@ -1533,6 +1592,7 @@ where each line of input produces a line of output.}
 \def\authortt{\sectt}
 
 % Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
 \setfont\chaprm\rmbshape{12}{\magstep2}
 \setfont\chapit\itbshape{10}{\magstep3}
 \setfont\chapsl\slbshape{10}{\magstep3}
@@ -1545,6 +1605,7 @@ where each line of input produces a line of output.}
 \font\chapsy=cmsy10 scaled \magstep3
 
 % Section fonts (14.4pt).
+\def\secnominalsize{14pt}
 \setfont\secrm\rmbshape{12}{\magstep1}
 \setfont\secit\itbshape{10}{\magstep2}
 \setfont\secsl\slbshape{10}{\magstep2}
@@ -1557,6 +1618,7 @@ where each line of input produces a line of output.}
 \font\secsy=cmsy10 scaled \magstep2
 
 % Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
 \setfont\ssecrm\rmbshape{12}{\magstephalf}
 \setfont\ssecit\itbshape{10}{1315}
 \setfont\ssecsl\slbshape{10}{1315}
@@ -1569,6 +1631,7 @@ where each line of input produces a line of output.}
 \font\ssecsy=cmsy10 scaled 1315
 
 % Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
 \setfont\reducedrm\rmshape{10}{1000}
 \setfont\reducedtt\ttshape{10}{1000}
 \setfont\reducedbf\bfshape{10}{1000}
@@ -1608,6 +1671,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
   \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
   \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
   \def\lsize{reduced}\def\lllsize{smaller}%
   \resetmathfonts \setleading{\textleading}}
 \def\titlefonts{%
@@ -1615,13 +1679,16 @@ where each line of input produces a line of output.}
   \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
   \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
   \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
   \def\lsize{chap}\def\lllsize{subsec}%
   \resetmathfonts \setleading{25pt}}
 \def\titlefont#1{{\titlefonts\rm #1}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
-  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
   \def\lsize{sec}\def\lllsize{text}%
   \resetmathfonts \setleading{19pt}}
 \def\secfonts{%
@@ -1629,6 +1696,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
   \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
   \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
   \def\lsize{subsec}\def\lllsize{reduced}%
   \resetmathfonts \setleading{16pt}}
 \def\subsecfonts{%
@@ -1636,6 +1704,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
   \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
   \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
   \def\lsize{text}\def\lllsize{small}%
   \resetmathfonts \setleading{15pt}}
 \let\subsubsecfonts = \subsecfonts
@@ -1644,6 +1713,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
   \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
   \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
   \def\lsize{small}\def\lllsize{smaller}%
   \resetmathfonts \setleading{10.5pt}}
 \def\smallfonts{%
@@ -1651,6 +1721,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
   \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
   \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
   \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{10.5pt}}
 \def\smallerfonts{%
@@ -1658,6 +1729,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
   \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
   \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
   \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{9.5pt}}
 
@@ -1720,9 +1792,13 @@ where each line of input produces a line of output.}
 \let\dfn=\smartslanted
 \let\emph=\smartitalic
 
+% @b, explicit bold.
 \def\b#1{{\bf #1}}
 \let\strong=\b
 
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
 % We can't just use \exhyphenpenalty, because that only has effect at
 % the end of a paragraph.  Restore normal hyphenation at the end of the
 % group within which \nohyphenation is presumably called.
@@ -1735,14 +1811,21 @@ where each line of input produces a line of output.}
 % sometimes \x has an active definition that messes things up.
 %
 \catcode`@=11
-  \def\frenchspacing{%
+  \def\plainfrenchspacing{%
     \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
     \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
   }
 \catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
 
 \def\t#1{%
-  {\tt \rawbackslash \frenchspacing #1}%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
   \null
 }
 \def\samp#1{`\tclose{#1}'\null}
@@ -1779,7 +1862,7 @@ where each line of input produces a line of output.}
     \nohyphenation
     %
     \rawbackslash
-    \frenchspacing
+    \plainfrenchspacing
     #1%
   }%
   \null
@@ -1799,8 +1882,14 @@ where each line of input produces a line of output.}
   \catcode`\_=\active
   %
   \global\def\code{\begingroup
-    \catcode`\-=\active \let-\codedash
-    \catcode`\_=\active \let_\codeunder
+    \catcode`\-=\active  \catcode`\_=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\realdash
+     \let_\realunder
+    \fi
     \codex
   }
 }
@@ -1820,6 +1909,28 @@ where each line of input produces a line of output.}
 }
 \def\codex #1{\tclose{#1}\endgroup}
 
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is undesirable in
+% some manuals, especially if they don't have long identifiers in
+% general.  @allowcodebreaks provides a way to control this.
+% 
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+  \fi\fi
+}
+
 % @kbd is like @code, except that if the argument is just one @key command,
 % then @kbd has no effect.
 
@@ -1827,16 +1938,16 @@ where each line of input produces a line of output.}
 %   `example' (@kbd uses ttsl only inside of @example and friends),
 %   or `code' (@kbd uses normal tty font always).
 \parseargdef\kbdinputstyle{%
-  \def\arg{#1}%
-  \ifx\arg\worddistinct
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
     \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
-  \else\ifx\arg\wordexample
+  \else\ifx\txiarg\wordexample
     \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
-  \else\ifx\arg\wordcode
+  \else\ifx\txiarg\wordcode
     \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
   \else
     \errhelp = \EMsimple
-    \errmessage{Unknown @kbdinputstyle option `\arg'}%
+    \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
   \fi\fi\fi
 }
 \def\worddistinct{distinct}
@@ -1948,7 +2059,7 @@ where each line of input produces a line of output.}
 % 
 \def\abbr#1{\doabbr #1,,\finish}
 \def\doabbr#1,#2,#3\finish{%
-  {\frenchspacing #1}%
+  {\plainfrenchspacing #1}%
   \def\temp{#2}%
   \ifx\temp\empty \else
     \space ({\unsepspaces \ignorespaces \temp \unskip})%
@@ -1959,6 +2070,54 @@ where each line of input produces a line of output.}
 %
 \def\pounds{{\it\$}}
 
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+% 
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+% 
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+% 
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+% 
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+% 
+% 
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  % 
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  % 
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  % 
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename 
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else 
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
 % @registeredsymbol - R in a circle.  The font for the R should really
 % be smaller yet, but lllsize is the best we can do for now.
 % Adapted from the plain.tex definition of \copyright.
@@ -2314,15 +2473,26 @@ where each line of input produces a line of output.}
 % @table, @ftable, @vtable.
 \envdef\table{%
   \let\itemindex\gobble
-  \tablex
+  \tablecheck{table}%
 }
 \envdef\ftable{%
   \def\itemindex ##1{\doind {fn}{\code{##1}}}%
-  \tablex
+  \tablecheck{ftable}%
 }
 \envdef\vtable{%
   \def\itemindex ##1{\doind {vr}{\code{##1}}}%
-  \tablex
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
 }
 \def\tablex#1{%
   \def\itemindicate{#1}%
@@ -2721,19 +2891,17 @@ where each line of input produces a line of output.}
   \global\setpercentfalse
 }
 
-\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
-% If so, do nothing. If not, give it an appropriate dimension based on
-% current baselineskip.
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
 \ifdim\multitablelinespace=0pt
 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
 \global\advance\multitablelinespace by-\ht0
-%% strut to put in table in case some entry doesn't have descenders,
-%% to keep lines equally spaced
-\let\multistrut = \strut
-\else
-%% FIXME: what is \box0 supposed to be?
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
+\fi
 %% Test to see if parskip is larger than space between lines of
 %% table. If not, do nothing.
 %%        If so, set to same dimension as multitablelinespace.
@@ -2963,9 +3131,8 @@ width0pt\relax} \fi
 % Index generation facilities
 
 % Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
 
 % \newindex {foo} defines an index named foo.
 % It automatically defines \fooindex such that
@@ -3051,6 +3218,7 @@ width0pt\relax} \fi
 % we have to laboriously prevent expansion for those that we don't.
 %
 \def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
   \def\@{@}% change to @@ when we switch to @ as escape char in index files.
   \def\ {\realbackslash\space }%
   % Need these in case \tex is in effect and \{ is a \delimiter again.
@@ -3059,10 +3227,33 @@ width0pt\relax} \fi
   \let\{ = \mylbrace
   \let\} = \myrbrace
   %
-  % \definedummyword defines \#1 as \realbackslash #1\space, thus
-  % effectively preventing its expansion.  This is used only for control
-  % words, not control letters, because the \space would be incorrect
-  % for control characters, but is needed to separate the control word
+  % Do the redefinitions.
+  \commondummies
+}
+
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+  \def\@{@@}%
+  \def\ {@ }%
+  \let\{ = \lbraceatcmd
+  \let\} = \rbraceatcmd
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+  %
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control% words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
   % from whatever follows.
   %
   % For control letters, we have \definedummyletter, which omits the
@@ -3072,107 +3263,69 @@ width0pt\relax} \fi
   % those that do not.  If it is followed by {arg} in the input, then
   % that will dutifully get written to the index (or wherever).
   %
-  \def\definedummyword##1{%
-    \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
-  }%
-  \def\definedummyletter##1{%
-    \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
-  }%
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
   \let\definedummyaccent\definedummyletter
   %
-  % Do the redefinitions.
-  \commondummies
-}
-
-% For the aux file, @ is the escape character.  So we want to redefine
-% everything using @ instead of \realbackslash.  When everything uses
-% @, this will be simpler.
-%
-\def\atdummies{%
-  \def\@{@@}%
-  \def\ {@ }%
-  \let\{ = \lbraceatcmd
-  \let\} = \rbraceatcmd
-  %
-  % (See comments in \indexdummies.)
-  \def\definedummyword##1{%
-    \expandafter\def\csname ##1\endcsname{@##1\space}%
-  }%
-  \def\definedummyletter##1{%
-    \expandafter\def\csname ##1\endcsname{@##1}%
-  }%
-  \let\definedummyaccent\definedummyletter
-  %
-  % Do the redefinitions.
-  \commondummies
-}
-
-% Called from \indexdummies and \atdummies.  \definedummyword and
-% \definedummyletter must be defined first.
-%
-\def\commondummies{%
-  %
-  \normalturnoffactive
-  %
   \commondummiesnofonts
   %
-  \definedummyletter{_}%
+  \definedummyletter\_%
   %
   % Non-English letters.
-  \definedummyword{AA}%
-  \definedummyword{AE}%
-  \definedummyword{L}%
-  \definedummyword{OE}%
-  \definedummyword{O}%
-  \definedummyword{aa}%
-  \definedummyword{ae}%
-  \definedummyword{l}%
-  \definedummyword{oe}%
-  \definedummyword{o}%
-  \definedummyword{ss}%
-  \definedummyword{exclamdown}%
-  \definedummyword{questiondown}%
-  \definedummyword{ordf}%
-  \definedummyword{ordm}%
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\L
+  \definedummyword\OE
+  \definedummyword\O
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\l
+  \definedummyword\oe
+  \definedummyword\o
+  \definedummyword\ss
+  \definedummyword\exclamdown
+  \definedummyword\questiondown
+  \definedummyword\ordf
+  \definedummyword\ordm
   %
   % Although these internal commands shouldn't show up, sometimes they do.
-  \definedummyword{bf}%
-  \definedummyword{gtr}%
-  \definedummyword{hat}%
-  \definedummyword{less}%
-  \definedummyword{sf}%
-  \definedummyword{sl}%
-  \definedummyword{tclose}%
-  \definedummyword{tt}%
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
   %
-  \definedummyword{LaTeX}%
-  \definedummyword{TeX}%
+  \definedummyword\LaTeX
+  \definedummyword\TeX
   %
   % Assorted special characters.
-  \definedummyword{bullet}%
-  \definedummyword{comma}%
-  \definedummyword{copyright}%
-  \definedummyword{registeredsymbol}%
-  \definedummyword{dots}%
-  \definedummyword{enddots}%
-  \definedummyword{equiv}%
-  \definedummyword{error}%
-  \definedummyword{expansion}%
-  \definedummyword{minus}%
-  \definedummyword{pounds}%
-  \definedummyword{point}%
-  \definedummyword{print}%
-  \definedummyword{result}%
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\minus
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\result
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
   %
   % Handle some cases of @value -- where it does not contain any
   % (non-fully-expandable) commands.
   \makevalueexpandable
-  %
-  % Normal spaces, not active ones.
-  \unsepspaces
-  %
-  % No macro expansion.
-  \turnoffmacros
 }
 
 % \commondummiesnofonts: common to \commondummies and \indexnofonts.
@@ -3182,57 +3335,57 @@ width0pt\relax} \fi
   \catcode`\~=\other
   \gdef\commondummiesnofonts{%
     % Control letters and accents.
-    \definedummyletter{!}%
-    \definedummyaccent{"}%
-    \definedummyaccent{'}%
-    \definedummyletter{*}%
-    \definedummyaccent{,}%
-    \definedummyletter{.}%
-    \definedummyletter{/}%
-    \definedummyletter{:}%
-    \definedummyaccent{=}%
-    \definedummyletter{?}%
-    \definedummyaccent{^}%
-    \definedummyaccent{`}%
-    \definedummyaccent{~}%
-    \definedummyword{u}%
-    \definedummyword{v}%
-    \definedummyword{H}%
-    \definedummyword{dotaccent}%
-    \definedummyword{ringaccent}%
-    \definedummyword{tieaccent}%
-    \definedummyword{ubaraccent}%
-    \definedummyword{udotaccent}%
-    \definedummyword{dotless}%
+    \definedummyletter\!%
+    \definedummyaccent\"%
+    \definedummyaccent\'%
+    \definedummyletter\*%
+    \definedummyaccent\,%
+    \definedummyletter\.%
+    \definedummyletter\/%
+    \definedummyletter\:%
+    \definedummyaccent\=%
+    \definedummyletter\?%
+    \definedummyaccent\^%
+    \definedummyaccent\`%
+    \definedummyaccent\~%
+    \definedummyword\u
+    \definedummyword\v
+    \definedummyword\H
+    \definedummyword\dotaccent
+    \definedummyword\ringaccent
+    \definedummyword\tieaccent
+    \definedummyword\ubaraccent
+    \definedummyword\udotaccent
+    \definedummyword\dotless
     %
     % Texinfo font commands.
-    \definedummyword{b}%
-    \definedummyword{i}%
-    \definedummyword{r}%
-    \definedummyword{sc}%
-    \definedummyword{t}%
+    \definedummyword\b
+    \definedummyword\i
+    \definedummyword\r
+    \definedummyword\sc
+    \definedummyword\t
     %
     % Commands that take arguments.
-    \definedummyword{acronym}%
-    \definedummyword{cite}%
-    \definedummyword{code}%
-    \definedummyword{command}%
-    \definedummyword{dfn}%
-    \definedummyword{emph}%
-    \definedummyword{env}%
-    \definedummyword{file}%
-    \definedummyword{kbd}%
-    \definedummyword{key}%
-    \definedummyword{math}%
-    \definedummyword{option}%
-    \definedummyword{samp}%
-    \definedummyword{strong}%
-    \definedummyword{tie}%
-    \definedummyword{uref}%
-    \definedummyword{url}%
-    \definedummyword{var}%
-    \definedummyword{verb}%
-    \definedummyword{w}%
+    \definedummyword\acronym
+    \definedummyword\cite
+    \definedummyword\code
+    \definedummyword\command
+    \definedummyword\dfn
+    \definedummyword\emph
+    \definedummyword\env
+    \definedummyword\file
+    \definedummyword\kbd
+    \definedummyword\key
+    \definedummyword\math
+    \definedummyword\option
+    \definedummyword\samp
+    \definedummyword\strong
+    \definedummyword\tie
+    \definedummyword\uref
+    \definedummyword\url
+    \definedummyword\var
+    \definedummyword\verb
+    \definedummyword\w
   }
 }
 
@@ -3243,13 +3396,9 @@ width0pt\relax} \fi
 %
 \def\indexnofonts{%
   % Accent commands should become @asis.
-  \def\definedummyaccent##1{%
-    \expandafter\let\csname ##1\endcsname\asis
-  }%
+  \def\definedummyaccent##1{\let##1\asis}%
   % We can just ignore other control letters.
-  \def\definedummyletter##1{%
-    \expandafter\def\csname ##1\endcsname{}%
-  }%
+  \def\definedummyletter##1{\let##1\empty}%
   % Hopefully, all control words can become @asis.
   \let\definedummyword\definedummyaccent
   %
@@ -3295,6 +3444,7 @@ width0pt\relax} \fi
   \def\enddots{...}%
   \def\equiv{==}%
   \def\error{error}%
+  \def\euro{euro}%
   \def\expansion{==>}%
   \def\minus{-}%
   \def\pounds{pounds}%
@@ -3302,8 +3452,17 @@ width0pt\relax} \fi
   \def\print{-|}%
   \def\result{=>}%
   %
-  % Don't write macro names.
-  \emptyusermacros
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  % 
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  % 
+  \macrolist
 }
 
 \let\indexbackslash=0  %overridden during \printindex.
@@ -3350,7 +3509,6 @@ width0pt\relax} \fi
   %
   % Remember, we are within a group.
   \indexdummies % Must do this here, since \bf, etc expand at this stage
-  \escapechar=`\\
   \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
       % so it will be output as is; and it will print as backslash.
   %
@@ -4217,11 +4375,11 @@ width0pt\relax} \fi
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unnchap}%
-      \def\thischapter{#1}%
+      \gdef\thischapter{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
       \def\toctype{omit}%
-      \xdef\thischapter{}%
+      \gdef\thischapter{}%
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
       \def\toctype{app}%
@@ -4410,11 +4568,11 @@ width0pt\relax} \fi
     \fi
     %
     \iflinks
-      \toks0 = {#2}%
-      \toks2 = \expandafter{\lastnode}%
-      \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
-                               {\the\toks2}{\noexpand\folio}}}%
-      \temp
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }
     \fi
   \fi
   %
@@ -4427,6 +4585,31 @@ width0pt\relax} \fi
   \ifpdf \global\pdfmakepagedesttrue \fi
 }
 
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+% 
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \jobname.toc
+}
+
 \newskip\contentsrightmargin \contentsrightmargin=1in
 \newcount\savepageno
 \newcount\lastnegativepageno \lastnegativepageno = -1
@@ -4448,11 +4631,7 @@ width0pt\relax} \fi
   %
   \savepageno = \pageno
   \begingroup                  % Set up to handle contents files properly.
-    \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
-    % We can't do this, because then an actual ^ in a section
-    % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
-    %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
-    \raggedbottom             % Worry more about breakpoints than the bottom.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
     \advance\hsize by -\contentsrightmargin % Don't use the full line length.
     %
     % Roman numerals for page numbers.
@@ -4465,7 +4644,7 @@ width0pt\relax} \fi
   \startcontents{\putwordTOC}%
     \openin 1 \jobname.toc
     \ifeof 1 \else
-      \input \jobname.toc
+      \readtocfile
     \fi
     \vfill \eject
     \contentsalignmacro % in case @setchapternewpage odd is in effect
@@ -4503,7 +4682,7 @@ width0pt\relax} \fi
     \let\unnsubsubsecentry = \numsecentry
     \openin 1 \jobname.toc
     \ifeof 1 \else
-      \input \jobname.toc
+      \readtocfile
     \fi
     \closein 1
     \vfill \eject
@@ -4693,6 +4872,7 @@ width0pt\relax} \fi
   \let\/=\ptexslash
   \let\*=\ptexstar
   \let\t=\ptext
+  \let\frenchspacing=\plainfrenchspacing
   %
   \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
   \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
@@ -4738,7 +4918,8 @@ width0pt\relax} \fi
 
 \let\afterenvbreak = \aboveenvbreak
 
-% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins.
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
 \let\nonarrowing=\relax
 
 % @cartouche ... @end cartouche: draw rectangle w/rounded corners around
@@ -4775,7 +4956,7 @@ width0pt\relax} \fi
 				% each corner char, and rule thickness
   \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
   % Flag to tell @lisp, etc., not to narrow margin.
-  \let\nonarrowing=\comment
+  \let\nonarrowing = t%
   \vbox\bgroup
       \baselineskip=0pt\parskip=0pt\lineskip=0pt
       \carttop
@@ -4815,11 +4996,11 @@ width0pt\relax} \fi
   \parskip = 0pt
   \parindent = 0pt
   \emergencystretch = 0pt % don't try to avoid overfull boxes
-  % @cartouche defines \nonarrowing to inhibit narrowing
-  % at next level down.
   \ifx\nonarrowing\relax
     \advance \leftskip by \lispnarrowing
     \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
   \fi
   \let\exdent=\nofillexdent
 }
@@ -4919,6 +5100,7 @@ width0pt\relax} \fi
     \advance\leftskip by \lispnarrowing
     \advance\rightskip by \lispnarrowing
     \exdentamount = \lispnarrowing
+  \else
     \let\nonarrowing = \relax
   \fi
   \parsearg\quotationlabel
@@ -5011,8 +5193,8 @@ width0pt\relax} \fi
   }
 \endgroup
 \def\setupverbatim{%
+  \let\nonarrowing = t%
   \nonfillstart
-  \advance\leftskip by -\defbodyindent
   % Easiest (and conventionally used) font for verbatim
   \tt
   \def\par{\leavevmode\egroup\box0\endgraf}%
@@ -5482,8 +5664,19 @@ width0pt\relax} \fi
 \newcount\paramno   % Count of parameters
 \newtoks\macname    % Macro name
 \newif\ifrecursive  % Is it recursive?
-\def\macrolist{}    % List of all defined macros in the form
-                    % \do\macro1\do\macro2...
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
 
 % Utility routines.
 % This does \let #1 = #2, with \csnames; that is,
@@ -5581,10 +5774,7 @@ width0pt\relax} \fi
      \else \errmessage{Macro name \the\macname\space already defined}\fi
      \global\cslet{macsave.\the\macname}{\the\macname}%
      \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
-     % Add the macroname to \macrolist
-     \toks0 = \expandafter{\macrolist\do}%
-     \xdef\macrolist{\the\toks0
-       \expandafter\noexpand\csname\the\macname\endcsname}%
+     \addtomacrolist{\the\macname}%
   \fi
   \begingroup \macrobodyctxt
   \ifrecursive \expandafter\parsermacbody
@@ -5598,7 +5788,7 @@ width0pt\relax} \fi
     % Remove the macro name from \macrolist:
     \begingroup
       \expandafter\let\csname#1\endcsname \relax
-      \let\do\unmacrodo
+      \let\definedummyword\unmacrodo
       \xdef\macrolist{\macrolist}%
     \endgroup
   \else
@@ -5610,10 +5800,10 @@ width0pt\relax} \fi
 % macro definitions that have been changed to \relax.
 %
 \def\unmacrodo#1{%
-  \ifx#1\relax
+  \ifx #1\relax
     % remove this
   \else
-    \noexpand\do \noexpand #1%
+    \noexpand\definedummyword \noexpand#1%
   \fi
 }
 
@@ -5732,25 +5922,6 @@ width0pt\relax} \fi
     \expandafter\parsearg
   \fi \next}
 
-% We want to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
-  \edef\next{\macrolist}\expandafter\endgroup\next}
-
-% For \indexnofonts, we need to get rid of all macros, leaving only the
-% arguments (if present).  Of course this is not nearly correct, but it
-% is the best we can do for now.  makeinfo does not expand macros in the
-% argument to @deffn, which ends up writing an index entry, and texindex
-% isn't prepared for an index sort entry that starts with \.
-% 
-% Since macro invocations are followed by braces, we can just redefine them
-% to take a single TeX argument.  The case of a macro invocation that
-% goes to end-of-line is not handled.
-% 
-\def\emptyusermacros{\begingroup
-  \def\do##1{\let\noexpand##1=\noexpand\asis}%
-  \edef\next{\macrolist}\expandafter\endgroup\next}
-
 
 % @alias.
 % We need some trickery to remove the optional spaces around the equal
@@ -5760,6 +5931,7 @@ width0pt\relax} \fi
 \def\aliasyyy #1=#2\relax{%
   {%
     \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
     \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
   }%
   \next
@@ -5829,8 +6001,6 @@ width0pt\relax} \fi
   \iflinks
     {%
       \atdummies  % preserve commands, but don't expand them
-      \turnoffactive
-      \otherbackslash
       \edef\writexrdef##1##2{%
 	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
 	  ##1}{##2}}% these are parameters of \writexrdef
@@ -5884,13 +6054,17 @@ width0pt\relax} \fi
   \ifpdf
     \leavevmode
     \getfilename{#4}%
-    {\turnoffactive \otherbackslash
+    {\turnoffactive
+     % See comments at \activebackslashdouble.
+     {\activebackslashdouble \xdef\pdfxrefdest{#1}%
+      \backslashparens\pdfxrefdest}%
+     %
      \ifnum\filenamelength>0
        \startlink attr{/Border [0 0 0]}%
-         goto file{\the\filename.pdf} name{#1}%
+         goto file{\the\filename.pdf} name{\pdfxrefdest}%
      \else
        \startlink attr{/Border [0 0 0]}%
-         goto name{\pdfmkpgn{#1}}%
+         goto name{\pdfmkpgn{\pdfxrefdest}}%
      \fi
     }%
     \linkcolor
@@ -5904,7 +6078,6 @@ width0pt\relax} \fi
     % include an _ in the xref name, etc.
     \indexnofonts
     \turnoffactive
-    \otherbackslash
     \expandafter\global\expandafter\let\expandafter\Xthisreftitle
       \csname XR#1-title\endcsname
   }%
@@ -5939,7 +6112,7 @@ width0pt\relax} \fi
       % into the usual \leavevmode...\vrule stuff for purposes of
       % printing. So we \turnoffactive for the \refx-snt, back on for the
       % printing, back off for the \refx-pg.
-      {\turnoffactive \otherbackslash
+      {\turnoffactive
        % Only output a following space if the -snt ref is nonempty; for
        % @unnumbered and @anchor, it won't be.
        \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
@@ -5952,7 +6125,7 @@ width0pt\relax} \fi
       ,\space
       %
       % output the `page 3'.
-      \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
     \fi
   \fi
   \endlink
@@ -6055,13 +6228,13 @@ width0pt\relax} \fi
 \def\tryauxfile{%
   \openin 1 \jobname.aux
   \ifeof 1 \else
-    \readauxfile
+    \readdatafile{aux}%
     \global\havexrefstrue
   \fi
   \closein 1
 }
 
-\def\readauxfile{\begingroup
+\def\setupdatafile{%
   \catcode`\^^@=\other
   \catcode`\^^A=\other
   \catcode`\^^B=\other
@@ -6130,11 +6303,11 @@ width0pt\relax} \fi
   %
   % Make the characters 128-255 be printing characters.
   {%
-    \count 1=128
+    \count1=128
     \def\loop{%
-      \catcode\count 1=\other
-      \advance\count 1 by 1
-      \ifnum \count 1<256 \loop \fi
+      \catcode\count1=\other
+      \advance\count1 by 1
+      \ifnum \count1<256 \loop \fi
     }%
   }%
   %
@@ -6142,10 +6315,13 @@ width0pt\relax} \fi
   \catcode`\{=1
   \catcode`\}=2
   \catcode`\@=0
-  %
-  \input \jobname.aux
-\endgroup}
+}
 
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
 
 \message{insertions,}
 % including footnotes.
@@ -6492,7 +6668,7 @@ width0pt\relax} \fi
       % \floatlabel-lof.  Besides \floatident, we include the short
       % caption if specified, else the full caption if specified, else nothing.
       {%
-        \atdummies \turnoffactive \otherbackslash
+        \atdummies
         % since we read the caption text in the macro world, where ^^M
         % is turned into a normal character, we have to scan it back, so
         % we don't write the literal three characters "^^M" into the aux file.
@@ -6682,9 +6858,9 @@ should work if nowhere else does.}
   \fi
 }
 
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
-% physical page width.
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
 %
 % We also call \setleading{\textleading}, so the caller should define
 % \textleading.  The caller should also set \parskip.
@@ -6731,7 +6907,7 @@ should work if nowhere else does.}
                     {11in}{8.5in}%
 }}
 
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
+% Use @smallbook to reset parameters for 7x9.25 trim size.
 \def\smallbook{{\globaldefs = 1
   \parskip = 2pt plus 1pt
   \textleading = 12pt
@@ -6748,6 +6924,24 @@ should work if nowhere else does.}
   \defbodyindent = .5cm
 }}
 
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
 % Use @afourpaper to print on European A4 paper.
 \def\afourpaper{{\globaldefs = 1
   \parskip = 3pt plus 2pt minus 1pt
@@ -6900,6 +7094,7 @@ should work if nowhere else does.}
 
 \catcode`\_=\active
 \def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
 % Subroutine for the previous macro.
 \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
 
@@ -6937,8 +7132,9 @@ should work if nowhere else does.}
  @gdef@otherbackslash{@let\=@realbackslash}
 }
 
-% \realbackslash is an actual character `\' with catcode other.
-{\catcode`\\=\other @gdef@realbackslash{\}}
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
 
 % \normalbackslash outputs one backslash in fixed width font.
 \def\normalbackslash{{\tt\backslashcurfont}}
@@ -6981,7 +7177,7 @@ should work if nowhere else does.}
 % On the other hand, perhaps the file did not have a `\input texinfo'. Then
 % the first `\{ in the file would cause an error. This macro tries to fix
 % that, assuming it is called before the first `\' could plausibly occur.
-% Also back turn on active characters that might appear in the input
+% Also turn back on active characters that might appear in the input
 % file name, in case not using a pre-dumped format.
 %
 @gdef@fixbackslash{%
diff --git a/libs/iksemel/configure.ac b/libs/iksemel/configure.ac
index 065ad16d01..ca4bb9d438 100644
--- a/libs/iksemel/configure.ac
+++ b/libs/iksemel/configure.ac
@@ -1,9 +1,10 @@
 dnl Process this file with autoconf to produce a configure script.
 AC_INIT
 AC_PREREQ(2.50)
+AC_CONFIG_AUX_DIR(build)
 AC_CONFIG_SRCDIR([configure.ac])
-AM_INIT_AUTOMAKE(iksemel,1.2)
-AM_CONFIG_HEADER(include/config.h)
+AM_INIT_AUTOMAKE(iksemel,1.3)
+AC_CONFIG_HEADERS(include/config.h)
 
 AC_CANONICAL_HOST
 
@@ -54,6 +55,35 @@ if test "x$GCC" = "xyes"; then
   fi
 fi
 
+AC_DEFUN([AX_COMPILER_VENDOR],
+[
+AC_CACHE_CHECK([for _AC_LANG compiler vendor], ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor,
+ [ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor=unknown
+  # note: don't check for gcc first since some other compilers define __GNUC__
+  for ventest in intel:__ICC,__ECC,__INTEL_COMPILER ibm:__xlc__,__xlC__,__IBMC__,__IBMCPP__ gnu:__GNUC__ sun:__SUNPRO_C,__SUNPRO_CC hp:__HP_cc,__HP_aCC dec:__DECC,__DECCXX,__DECC_VER,__DECCXX_VER borland:__BORLANDC__,__TURBOC__ comeau:__COMO__ cray:_CRAYC kai:__KCC lcc:__LCC__ metrowerks:__MWERKS__ sgi:__sgi,sgi microsoft:_MSC_VER watcom:__WATCOMC__ portland:__PGI; do
+    vencpp="defined("`echo $ventest | cut -d: -f2 | sed 's/,/) || defined(/g'`")"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM(,[
+#if !($vencpp)
+      thisisanerror;
+#endif
+])], [ax_cv_]_AC_LANG_ABBREV[_compiler_vendor=`echo $ventest | cut -d: -f1`; break])
+  done
+ ])
+])
+
+AX_COMPILER_VENDOR
+
+#  Enable 64 bit build
+AC_ARG_ENABLE(64,
+[AC_HELP_STRING([--enable-64],[build with 64 bit support])],[enable_64="$enable_64"],[enable_64="no"])
+
+if test "x${ax_cv_c_compiler_vendor}"  =  "xsun" ; then
+    if test "${enable_64}" = "yes"; then
+        CFLAGS="$CFLAGS -m64"
+        CXXFLAGS="$CXXFLAGS -m64"
+    fi
+fi
+
 dnl Generating makefiles
 AC_CONFIG_FILES([
 Makefile