From a642381f257e5463d5874b199b8163762f31e596 Mon Sep 17 00:00:00 2001 From: Anthony Minessale Date: Mon, 2 Jan 2006 18:31:50 +0000 Subject: [PATCH] unix retool git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@255 d0543943-73ff-0310-b7d9-9358b9ac24b2 --- Makefile.am | 23 ++- Makefile.in | 38 +++- aclocal.m4 | 172 ++++++++-------- buildlib.sh | 2 +- configure | 341 ++++++++++++++++++-------------- configure.in | 1 + src/include/switch_resample.h | 1 + src/mod/mod_exosip/Makefile | 10 +- src/mod/mod_iaxchan/Makefile | 2 +- src/mod/mod_portaudio/Makefile | 2 +- src/mod/mod_sndfile/Makefile | 2 +- src/mod/mod_speexcodec/Makefile | 2 +- src/mod/mod_xmpp_event/Makefile | 2 +- src/switch_resample.c | 4 +- 14 files changed, 343 insertions(+), 259 deletions(-) diff --git a/Makefile.am b/Makefile.am index 59bb3774e9..c7be201630 100644 --- a/Makefile.am +++ b/Makefile.am @@ -3,13 +3,14 @@ SUBDIRS = AUTOMAKE_OPTS = gnu MAKE=gmake NAME=freeswitch -PREFIX=$(prefix)/${NAME} +PREFIX=$(prefix) APR_CONFIG=$(prefix)/bin/apr-1-config APU_CONFIG=$(prefix)/bin/apu-1-config AM_CFLAGS = $(shell $(APR_CONFIG) --cflags --cppflags --includes) AM_LDFLAGS = $(shell $(APR_CONFIG) --link-ld --libs ) AM_CFLAGS += $(shell $(APU_CONFIG) --includes) AM_LDFLAGS += $(shell $(APU_CONFIG) --link-ld --libs ) -lsqlite3 +AM_LDFLAGS += -lresample -lm OSARCH=$(shell uname -s) if ISLINUX AM_LDFLAGS += -Wl,-E @@ -57,7 +58,8 @@ src/switch_core.c \ src/switch_loadable_module.c \ src/switch_mutex.c \ src/switch_utils.c \ -src/switch_event.c +src/switch_event.c \ +src/switch_resample.c #bindir = $(PREFIX)/bin @@ -76,7 +78,8 @@ library_include_HEADERS = src/include/switch.h \ src/include/switch_utils.h \ src/include/switch_caller.h \ src/include/switch_buffer.h \ - src/include/switch_event.h + src/include/switch_event.h \ + src/include/switch_resample.h lib_LTLIBRARIES = libfreeswitch.la libfreeswitch_la_CFLAGS = $(AM_CFLAGS) -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g @@ -96,14 +99,18 @@ nodepends: .nodepends yesdepends: rm .nodepends + depends: - ./buildlib.sh . install sqlite-3.2.8.tar.gz --disable-tcl --enable-threadsafe - ./buildlib.sh . install apr-1.2.2.tar.gz - ./buildlib.sh . install apr-util-1.2.2.tar.gz --with-apr=../apr-1.2.2 + ./buildlib.sh . install sqlite-3.2.8.tar.gz --prefix=$(PREFIX) --disable-tcl --enable-threadsafe + ./buildlib.sh . install apr-1.2.2.tar.gz --prefix=$(PREFIX) + ./buildlib.sh . install apr-util-1.2.2.tar.gz --with-apr=../apr-1.2.2 --prefix=$(PREFIX) + ./buildlib.sh . install libresample-0.1.3.tgz --prefix=$(PREFIX) + cp libs/libresample-0.1.3/*.a $(PREFIX)/lib + cp libs/libresample-0.1.3/include/* $(PREFIX)/include modules: $(NAME) @echo making modules - @cd src/mod && for i in $(shell cat modules.conf | grep -v \#) ; do echo making $$i ; BASE="$(PWD)" OSARCH="$(OSARCH)" SOLINK="$(SOLINK)" LDFLAGS="$(AM_LDFLAGS) -lfreeswitch" CFLAGS="$(AM_CFLAGS)" CC="$(CC)" MOD="$$i" $(PWD)/modmake.sh $(PWD) $$i || exit 1; done + @cd src/mod && for i in $(shell cat modules.conf | grep -v \#) ; do echo making $$i ; PREFIX="$(PREFIX)" BASE="$(PWD)" OSARCH="$(OSARCH)" SOLINK="$(SOLINK)" LDFLAGS="$(AM_LDFLAGS) -lfreeswitch" CFLAGS="$(AM_CFLAGS)" CC="$(CC)" MOD="$$i" $(PWD)/modmake.sh $(PWD) $$i || exit 1; done modclean: @cd src/mod && for i in `find . -type d -name mod_\*` ; do echo making clean $$i ; SOLINK="$(SOLINK)" CFLAGS="$(CFLAGS)" CC="$(CC)" MOD="$$i" $(PWD)/modmake.sh $(PWD) $$i clean || exit 1; done @@ -112,7 +119,7 @@ modclean: install_mod: modules @echo Installing $(NAME) - @mkdir -p $(PREFIX) $(PREFIX)/conf $(PREFIX)/mod $(PREFIX)/db + @mkdir -p $(PREFIX) $(PREFIX)/conf $(PREFIX)/mod $(PREFIX)/db $(PREFIX)/bin @/bin/cp -p ./$(NAME) $(PREFIX)/bin @ln -sf $(PREFIX)/bin/$(NAME) /usr/bin @echo Installing Modules diff --git a/Makefile.in b/Makefile.in index 48dba709c7..7424560a7e 100644 --- a/Makefile.in +++ b/Makefile.in @@ -77,7 +77,8 @@ am_libfreeswitch_la_OBJECTS = libfreeswitch_la-switch_buffer.lo \ libfreeswitch_la-switch_loadable_module.lo \ libfreeswitch_la-switch_mutex.lo \ libfreeswitch_la-switch_utils.lo \ - libfreeswitch_la-switch_event.lo + libfreeswitch_la-switch_event.lo \ + libfreeswitch_la-switch_resample.lo libfreeswitch_la_OBJECTS = $(am_libfreeswitch_la_OBJECTS) binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) @@ -224,7 +225,7 @@ SUBDIRS = AUTOMAKE_OPTS = gnu MAKE = gmake NAME = freeswitch -PREFIX = $(prefix)/${NAME} +PREFIX = $(prefix) APR_CONFIG = $(prefix)/bin/apr-1-config APU_CONFIG = $(prefix)/bin/apu-1-config @@ -237,7 +238,8 @@ AM_CFLAGS = $(shell $(APR_CONFIG) --cflags --cppflags --includes) \ -DSWITCH_CONF_DIR=\"$(PREFIX)/conf\" \ -DSWITCH_DB_DIR=\"$(PREFIX)/db\" AM_LDFLAGS = $(shell $(APR_CONFIG) --link-ld --libs ) $(shell \ - $(APU_CONFIG) --link-ld --libs ) -lsqlite3 $(am__append_1) + $(APU_CONFIG) --link-ld --libs ) -lsqlite3 -lresample -lm \ + $(am__append_1) OSARCH = $(shell uname -s) @ISMAC_FALSE@SOLINK = -shared -Xlinker -x @ISMAC_TRUE@SOLINK = -dynamic -bundle -undefined suppress -force_flat_namespace @@ -265,7 +267,8 @@ src/switch_core.c \ src/switch_loadable_module.c \ src/switch_mutex.c \ src/switch_utils.c \ -src/switch_event.c +src/switch_event.c \ +src/switch_resample.c #bindir = $(PREFIX)/bin @@ -284,7 +287,8 @@ library_include_HEADERS = src/include/switch.h \ src/include/switch_utils.h \ src/include/switch_caller.h \ src/include/switch_buffer.h \ - src/include/switch_event.h + src/include/switch_event.h \ + src/include/switch_resample.h lib_LTLIBRARIES = libfreeswitch.la libfreeswitch_la_CFLAGS = $(AM_CFLAGS) -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g @@ -423,6 +427,7 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_event.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_mutex.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_resample.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_utils.Plo@am__quote@ .c.o: @@ -516,6 +521,13 @@ libfreeswitch_la-switch_event.lo: src/switch_event.c @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_event.lo `test -f 'src/switch_event.c' || echo '$(srcdir)/'`src/switch_event.c +libfreeswitch_la-switch_resample.lo: src/switch_resample.c +@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_resample.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo" -c -o libfreeswitch_la-switch_resample.lo `test -f 'src/switch_resample.c' || echo '$(srcdir)/'`src/switch_resample.c; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_resample.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_resample.c' object='libfreeswitch_la-switch_resample.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_resample.lo `test -f 'src/switch_resample.c' || echo '$(srcdir)/'`src/switch_resample.c + freeswitch-switch.o: src/switch.c @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(freeswitch_CFLAGS) $(CFLAGS) -MT freeswitch-switch.o -MD -MP -MF "$(DEPDIR)/freeswitch-switch.Tpo" -c -o freeswitch-switch.o `test -f 'src/switch.c' || echo '$(srcdir)/'`src/switch.c; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/freeswitch-switch.Tpo" "$(DEPDIR)/freeswitch-switch.Po"; else rm -f "$(DEPDIR)/freeswitch-switch.Tpo"; exit 1; fi @@ -952,26 +964,32 @@ yesdepends: rm .nodepends depends: - ./buildlib.sh . install sqlite-3.2.8.tar.gz --disable-tcl --enable-threadsafe - ./buildlib.sh . install apr-1.2.2.tar.gz - ./buildlib.sh . install apr-util-1.2.2.tar.gz --with-apr=../apr-1.2.2 + ./buildlib.sh . install sqlite-3.2.8.tar.gz --prefix=$(PREFIX) --disable-tcl --enable-threadsafe + ./buildlib.sh . install apr-1.2.2.tar.gz --prefix=$(PREFIX) + ./buildlib.sh . install apr-util-1.2.2.tar.gz --with-apr=../apr-1.2.2 --prefix=$(PREFIX) + ./buildlib.sh . install libresample-0.1.3.tgz --prefix=$(PREFIX) + cp libs/libresample-0.1.3/*.a $(PREFIX)/lib + cp libs/libresample-0.1.3/include/* $(PREFIX)/include modules: $(NAME) @echo making modules - @cd src/mod && for i in $(shell cat modules.conf | grep -v \#) ; do echo making $$i ; BASE="$(PWD)" OSARCH="$(OSARCH)" SOLINK="$(SOLINK)" LDFLAGS="$(AM_LDFLAGS) -lfreeswitch" CFLAGS="$(AM_CFLAGS)" CC="$(CC)" MOD="$$i" $(PWD)/modmake.sh $(PWD) $$i || exit 1; done + @cd src/mod && for i in $(shell cat modules.conf | grep -v \#) ; do echo making $$i ; PREFIX="$(PREFIX)" BASE="$(PWD)" OSARCH="$(OSARCH)" SOLINK="$(SOLINK)" LDFLAGS="$(AM_LDFLAGS) -lfreeswitch" CFLAGS="$(AM_CFLAGS)" CC="$(CC)" MOD="$$i" $(PWD)/modmake.sh $(PWD) $$i || exit 1; done modclean: @cd src/mod && for i in `find . -type d -name mod_\*` ; do echo making clean $$i ; SOLINK="$(SOLINK)" CFLAGS="$(CFLAGS)" CC="$(CC)" MOD="$$i" $(PWD)/modmake.sh $(PWD) $$i clean || exit 1; done install_mod: modules @echo Installing $(NAME) - @mkdir -p $(PREFIX) $(PREFIX)/conf $(PREFIX)/mod $(PREFIX)/db + @mkdir -p $(PREFIX) $(PREFIX)/conf $(PREFIX)/mod $(PREFIX)/db $(PREFIX)/bin @/bin/cp -p ./$(NAME) $(PREFIX)/bin @ln -sf $(PREFIX)/bin/$(NAME) /usr/bin @echo Installing Modules @/bin/cp -f src/mod/*/mod_*.so $(PREFIX)/mod >/dev/null 2<&1 || echo No modules to copy. @echo done +dox: + doxygen $(PWD)/docs/Doxygen.conf + eclean: clean rm -f `find . -type f -name \*~` rm -f `find . -type f -name \.*~` diff --git a/aclocal.m4 b/aclocal.m4 index 42ac573159..e5da51da21 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -143,7 +143,7 @@ rm="rm -f" default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -359,8 +359,8 @@ if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -529,7 +529,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*linux*) @@ -611,7 +611,7 @@ AC_CACHE_CHECK([$1], [$2], # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -650,7 +650,7 @@ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], LDFLAGS="$LDFLAGS $3" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized + # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. @@ -725,7 +725,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else - lt_cv_sys_max_cmd_len=65536 # usable default for *BSD + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` @@ -737,7 +737,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 - # + # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; @@ -854,7 +854,7 @@ int main () }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; @@ -1003,7 +1003,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) @@ -1021,7 +1021,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi - chmod u+w . + chmod u+w . 2>&AS_MESSAGE_LOG_FD $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -1281,7 +1281,8 @@ cygwin* | mingw* | pw32*) dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -1334,7 +1335,7 @@ darwin* | rhapsody*) soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -1372,7 +1373,14 @@ kfreebsd*-gnu) freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -1417,7 +1425,7 @@ hpux9* | hpux10* | hpux11*) version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -1813,7 +1821,7 @@ AC_DEFUN([AC_LIBTOOL_DLOPEN], # AC_LIBTOOL_WIN32_DLL # -------------------- -# declare package support for building win32 dll's +# declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL @@ -1987,7 +1995,7 @@ dnl not every word. This closes a longstanding sh security hole. if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -2097,7 +2105,7 @@ AC_CACHE_VAL(lt_cv_path_LD, if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 &1 -sh ./configure --prefix=/usr/local $@ +sh ./configure $@ if [ $? == 0 ] ; then make diff --git a/configure b/configure index 6bad46ccf4..53e3def229 100755 --- a/configure +++ b/configure @@ -287,8 +287,8 @@ if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string="`eval $cmd`") 2>/dev/null && - echo_test_string="`eval $cmd`" && + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break @@ -428,6 +428,7 @@ PACKAGE_STRING='FULL-PACKAGE-NAME VERSION' PACKAGE_BUGREPORT='BUG-REPORT-ADDRESS' ac_unique_file="src/switch.c" +ac_default_prefix=/usr/local/freeswitch # Factoring default headers for most tests. ac_includes_default="\ #include @@ -1950,6 +1951,7 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_headers="$ac_config_headers src/include/config.h" + # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3340,7 +3342,7 @@ else if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &6 if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 conftest.$ac_ext + echo '#line 3695 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -3733,7 +3735,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*linux*) @@ -5269,7 +5271,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5272:" \ +echo "$as_me:5274:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5466,7 +5468,7 @@ else elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else - lt_cv_sys_max_cmd_len=65536 # usable default for *BSD + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` @@ -5781,7 +5783,7 @@ rm="rm -f" default_ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except M$VC, +# All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" @@ -6102,7 +6104,7 @@ else if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -6164,7 +6166,7 @@ else if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then @@ -6313,7 +6315,7 @@ else LDFLAGS="$LDFLAGS $lt_prog_compiler_static" printf "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized + # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. @@ -6364,14 +6366,14 @@ else # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6370: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6372: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6374: \$? = $ac_status" >&5 + echo "$as_me:6376: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -6454,7 +6456,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -6501,7 +6503,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -6531,12 +6533,12 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; - pgcc* | pgf77* | pgf90*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-static' + lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' @@ -6626,14 +6628,14 @@ else # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6632: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6634: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6636: \$? = $ac_status" >&5 + echo "$as_me:6638: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -6660,7 +6662,7 @@ else fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= @@ -6688,14 +6690,14 @@ else # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6694: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6696: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6698: \$? = $ac_status" >&5 + echo "$as_me:6700: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -6706,7 +6708,7 @@ else lt_cv_prog_compiler_c_o=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -6906,11 +6908,11 @@ EOF tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* ) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -7218,7 +7220,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec=' ' archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds it's shared libraries. + # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi @@ -7258,7 +7260,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; darwin* | rhapsody*) - case "$host_os" in + case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag='${wl}-undefined ${wl}suppress' ;; @@ -7287,7 +7289,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi output_verbose_link_cmd='echo' archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else @@ -7296,7 +7298,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi output_verbose_link_cmd='echo' archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; @@ -7362,7 +7364,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; @@ -7371,7 +7373,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -7381,7 +7383,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld='+b $libdir' @@ -7840,7 +7842,8 @@ cygwin* | mingw* | pw32*) dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -7893,7 +7896,7 @@ darwin* | rhapsody*) soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -7931,7 +7934,14 @@ kfreebsd*-gnu) freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -7976,7 +7986,7 @@ hpux9* | hpux10* | hpux11*) version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -8931,7 +8941,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; @@ -9029,7 +9039,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; @@ -9145,7 +9155,7 @@ test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -9748,7 +9758,7 @@ postdeps_CXX= compiler_lib_search_path_CXX= # Source file extension for C++ test sources. -ac_ext=cc +ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o @@ -9884,7 +9894,7 @@ else if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. + # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &6 if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. - output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in @@ -10975,6 +10978,20 @@ fi $rm -f confest.$objext +# PORTME: override above test on systems where it is broken +case $host_os in +solaris*) + case $cc_basename in + CC*) + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + postdeps_CXX='-lCstd -lCrun' + ;; + esac +esac + + case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac @@ -11030,7 +11047,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) ;; *) @@ -11099,7 +11116,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -11140,7 +11157,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 # Portland Group C++ compiler. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' - lt_prog_compiler_static_CXX='-static' + lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ @@ -11274,14 +11291,14 @@ else # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11280: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11297: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11284: \$? = $ac_status" >&5 + echo "$as_me:11301: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -11308,7 +11325,7 @@ else fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= @@ -11336,14 +11353,14 @@ else # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11342: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11359: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11346: \$? = $ac_status" >&5 + echo "$as_me:11363: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -11354,7 +11371,7 @@ else lt_cv_prog_compiler_c_o_CXX=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -11617,7 +11634,8 @@ cygwin* | mingw* | pw32*) dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -11670,7 +11688,7 @@ darwin* | rhapsody*) soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -11708,7 +11726,14 @@ kfreebsd*-gnu) freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -11753,7 +11778,7 @@ hpux9* | hpux10* | hpux11*) version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -12708,7 +12733,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; @@ -12806,7 +12831,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; @@ -13428,7 +13453,7 @@ test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. -case "$host_os" in +case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then @@ -13516,7 +13541,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -13563,7 +13588,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 lt_prog_compiler_wl_F77='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -13593,12 +13618,12 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-static' ;; - pgcc* | pgf77* | pgf90*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-fpic' - lt_prog_compiler_static_F77='-static' + lt_prog_compiler_static_F77='-Bstatic' ;; ccc*) lt_prog_compiler_wl_F77='-Wl,' @@ -13688,14 +13713,14 @@ else # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13694: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13719: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13698: \$? = $ac_status" >&5 + echo "$as_me:13723: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -13722,7 +13747,7 @@ else fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_F77= @@ -13750,14 +13775,14 @@ else # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13756: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13781: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13760: \$? = $ac_status" >&5 + echo "$as_me:13785: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -13768,7 +13793,7 @@ else lt_cv_prog_compiler_c_o_F77=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -13968,11 +13993,11 @@ EOF tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec_F77='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* ) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_F77='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -14260,7 +14285,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_F77=' ' archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds it's shared libraries. + # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi @@ -14300,7 +14325,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; darwin* | rhapsody*) - case "$host_os" in + case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' ;; @@ -14329,7 +14354,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi output_verbose_link_cmd='echo' archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else @@ -14338,7 +14363,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi output_verbose_link_cmd='echo' archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; @@ -14404,7 +14429,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; @@ -14413,7 +14438,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -14423,7 +14448,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld_F77='+b $libdir' @@ -14882,7 +14907,8 @@ cygwin* | mingw* | pw32*) dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -14935,7 +14961,7 @@ darwin* | rhapsody*) soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -14973,7 +14999,14 @@ kfreebsd*-gnu) freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -15018,7 +15051,7 @@ hpux9* | hpux10* | hpux11*) version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -15872,14 +15905,14 @@ else # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15878: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15911: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15882: \$? = $ac_status" >&5 + echo "$as_me:15915: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -15962,7 +15995,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -16009,7 +16042,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 lt_prog_compiler_wl_GCJ='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) # +Z the default ;; @@ -16039,12 +16072,12 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-static' ;; - pgcc* | pgf77* | pgf90*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-fpic' - lt_prog_compiler_static_GCJ='-static' + lt_prog_compiler_static_GCJ='-Bstatic' ;; ccc*) lt_prog_compiler_wl_GCJ='-Wl,' @@ -16134,14 +16167,14 @@ else # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16140: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16173: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16144: \$? = $ac_status" >&5 + echo "$as_me:16177: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -16168,7 +16201,7 @@ else fi fi -case "$host_os" in +case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_GCJ= @@ -16196,14 +16229,14 @@ else # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16202: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16235: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16206: \$? = $ac_status" >&5 + echo "$as_me:16239: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -16214,7 +16247,7 @@ else lt_cv_prog_compiler_c_o_GCJ=yes fi fi - chmod u+w . + chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation @@ -16414,11 +16447,11 @@ EOF tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec_GCJ='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* ) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_GCJ='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -16726,7 +16759,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_GCJ=' ' archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds it's shared libraries. + # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi @@ -16766,7 +16799,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; darwin* | rhapsody*) - case "$host_os" in + case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' ;; @@ -16795,7 +16828,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi output_verbose_link_cmd='echo' archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else @@ -16804,7 +16837,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi output_verbose_link_cmd='echo' archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; @@ -16870,7 +16903,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hpux10* | hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; @@ -16879,7 +16912,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; esac else - case "$host_cpu" in + case $host_cpu in hppa*64*|ia64*) archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ;; @@ -16889,7 +16922,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi esac fi if test "$with_gnu_ld" = no; then - case "$host_cpu" in + case $host_cpu in hppa*64*) hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' @@ -17348,7 +17381,8 @@ cygwin* | mingw* | pw32*) dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' @@ -17401,7 +17435,7 @@ darwin* | rhapsody*) soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. if test "$GCC" = yes; then sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` @@ -17439,7 +17473,14 @@ kfreebsd*-gnu) freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) @@ -17484,7 +17525,7 @@ hpux9* | hpux10* | hpux11*) version_type=sunos need_lib_prefix=no need_version=no - case "$host_cpu" in + case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes @@ -18439,7 +18480,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; @@ -18537,7 +18578,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null + (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; diff --git a/configure.in b/configure.in index e99c5703aa..e77b1991ab 100644 --- a/configure.in +++ b/configure.in @@ -7,6 +7,7 @@ AM_INIT_AUTOMAKE(libfreeswitch,0.1) AC_CONFIG_SRCDIR([src/switch.c]) AC_CONFIG_HEADER([src/include/config.h]) +AC_PREFIX_DEFAULT(/usr/local/freeswitch) # Checks for programs. AC_PROG_CC AC_PROG_MAKE_SET diff --git a/src/include/switch_resample.h b/src/include/switch_resample.h index 6fb09b3a0c..1a365a9e63 100644 --- a/src/include/switch_resample.h +++ b/src/include/switch_resample.h @@ -39,6 +39,7 @@ #ifdef __cplusplus extern "C" { #endif +#include struct switch_audio_resampler { void *resampler; diff --git a/src/mod/mod_exosip/Makefile b/src/mod/mod_exosip/Makefile index a0d0a1478b..5e8906382f 100644 --- a/src/mod/mod_exosip/Makefile +++ b/src/mod/mod_exosip/Makefile @@ -10,11 +10,11 @@ endif all: depends $(MOD).so depends: - $(BASE)/buildlib.sh $(BASE) install jthread-1.1.2.tar.gz - $(BASE)/buildlib.sh $(BASE) install jrtplib-3.3.0.tar.gz - $(BASE)/buildlib.sh $(BASE) install jrtp4c - $(BASE)/buildlib.sh $(BASE) install libosip2-2.2.2.tar.gz - $(BASE)/buildlib.sh $(BASE) install libeXosip2-2.2.2.tar.gz --disable-josua + $(BASE)/buildlib.sh $(BASE) install jthread-1.1.2.tar.gz --prefix=$(PREFIX) + $(BASE)/buildlib.sh $(BASE) install jrtplib-3.3.0.tar.gz --prefix=$(PREFIX) + $(BASE)/buildlib.sh $(BASE) install jrtp4c --prefix=$(PREFIX) + $(BASE)/buildlib.sh $(BASE) install libosip2-2.2.2.tar.gz --prefix=$(PREFIX) + $(BASE)/buildlib.sh $(BASE) install libeXosip2-2.2.2.tar.gz --disable-josua --prefix=$(PREFIX) $(MOD).so: $(MOD).c diff --git a/src/mod/mod_iaxchan/Makefile b/src/mod/mod_iaxchan/Makefile index be09c93a2d..6e4f38205a 100644 --- a/src/mod/mod_iaxchan/Makefile +++ b/src/mod/mod_iaxchan/Makefile @@ -3,7 +3,7 @@ LDFLAGS += -liax -L/usr/local/lib all: depends $(MOD).so depends: - $(BASE)/buildlib.sh $(BASE) install iax --enable-newjb + $(BASE)/buildlib.sh $(BASE) install iax --enable-newjb --prefix=$(PREFIX) $(MOD).so: $(MOD).c $(CC) $(CFLAGS) -fPIC -c $(MOD).c -o $(MOD).o diff --git a/src/mod/mod_portaudio/Makefile b/src/mod/mod_portaudio/Makefile index dea5a236db..0d78e0b06a 100644 --- a/src/mod/mod_portaudio/Makefile +++ b/src/mod/mod_portaudio/Makefile @@ -4,7 +4,7 @@ MYOBJS = pablio.o ringbuffer.o all: depends $(MOD).so depends: - $(BASE)/buildlib.sh $(BASE) install portaudio.tar.gz + $(BASE)/buildlib.sh $(BASE) install portaudio.tar.gz --prefix=$(PREFIX) %.o: %.c $(CC) -fPIC $(CFLAGS) -c -o $@ $< diff --git a/src/mod/mod_sndfile/Makefile b/src/mod/mod_sndfile/Makefile index ae41dd8b6a..1056e8fdd8 100644 --- a/src/mod/mod_sndfile/Makefile +++ b/src/mod/mod_sndfile/Makefile @@ -3,7 +3,7 @@ LDFLAGS += -lsndfile -L/usr/local/lib all: depends $(MOD).so depends: - $(BASE)/buildlib.sh $(BASE) install libsndfile-1.0.12.tar.gz + $(BASE)/buildlib.sh $(BASE) install libsndfile-1.0.12.tar.gz --prefix=$(PREFIX) $(MOD).so: $(MOD).c $(CC) $(CFLAGS) -fPIC -c $(MOD).c -o $(MOD).o diff --git a/src/mod/mod_speexcodec/Makefile b/src/mod/mod_speexcodec/Makefile index 44afd19f1b..396db30128 100644 --- a/src/mod/mod_speexcodec/Makefile +++ b/src/mod/mod_speexcodec/Makefile @@ -1,7 +1,7 @@ all: depends $(MOD).so depends: - $(BASE)/buildlib.sh $(BASE) install speex-1.1.11.1.tar.gz + $(BASE)/buildlib.sh $(BASE) install speex-1.1.11.1.tar.gz --prefix=$(PREFIX) $(MOD).so: $(MOD).c $(CC) $(CFLAGS) -fPIC -c $(MOD).c -o $(MOD).o diff --git a/src/mod/mod_xmpp_event/Makefile b/src/mod/mod_xmpp_event/Makefile index 21bc939aa1..e99f9650eb 100644 --- a/src/mod/mod_xmpp_event/Makefile +++ b/src/mod/mod_xmpp_event/Makefile @@ -3,7 +3,7 @@ LDFLAGS += -liksemel -L/usr/local/lib all: depends $(MOD).so depends: - $(BASE)/buildlib.sh $(BASE) install iksemel-1.2.tar.gz + $(BASE)/buildlib.sh $(BASE) install iksemel-1.2.tar.gz --prefix=$(PREFIX) $(MOD).so: $(MOD).c $(CC) $(CFLAGS) -fPIC -c $(MOD).c -o $(MOD).o diff --git a/src/switch_resample.c b/src/switch_resample.c index 412c16f168..ace26a4f47 100644 --- a/src/switch_resample.c +++ b/src/switch_resample.c @@ -113,7 +113,7 @@ SWITCH_DECLARE(size_t) switch_float_to_short(float *f, short *s, size_t len) } else { s[i] = (short)(ft-0.5); } - if (s[i] > (short)MAXSAMPLE) s[i] = (short)MAXSAMPLE; + if ((float)s[i] > MAXSAMPLE) s[i] = (short)MAXSAMPLE; if (s[i] < (short)-MAXSAMPLE) s[i] = (short)-MAXSAMPLE; } return len; @@ -188,4 +188,4 @@ SWITCH_DECLARE(void) switch_swap_linear(int16_t *buf, int len) for (i = 0; i < len; i++) { buf[i] = ((buf[i] >> 8) & 0x00ff) | ((buf[i] << 8) & 0xff00); } -} \ No newline at end of file +}