Callbacks are invoked from ftdm_span_start/_stop().
I/O is started before SIG and shut down in reverse order.
This is needed for ftmod_misdn, to move the mISDN message handling
into a separate thread (solving the mISDN socket vs. FreeTDM API issues).
With these callbacks, the I/O thread can be started after the span I/O configuration
has been (successfully) completed and stopped before destroying the span.
NOTE: Both SIG and I/O callbacks are called with the span mutex locked,
so threads created or destroyed synchronously in either of the custom
start/stop functions, can not use ftdm_span_*() functions that lock
the span mutex (e.g. ftdm_span_get_channel_count()).
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
The len variable can, in certain situations (large burst of incoming non-SLIN audio),
exceed the size of the on-stack frame buffer, which causes ftdm_buffer_read_loop() to
overwrite the dt_buffer pointer.
Use ftdm_min() to make sure len (after conversion to SLIN units) isn't larger
than the frame buffer size.
Also adds are couple more code comments.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Resolves OPENZAP-189
Fixes:
src/ftmod/ftmod_isdn/ftmod_isdn.c: In function 'ftdm_isdn_931_34':
src/ftmod/ftmod_isdn/ftmod_isdn.c:902:21: error: variable 'status' set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
. added called party number INN variable
ie. <action application="export" data="freetdm_ss7_cld_inn=0"/>
. added multiple variables to set User Service Information IE
variables are :
ss7_iam_usi_trans_cap
ss7_iam_usi_code_standard
ss7_iam_usi_trans_mode
ss7_iam_usi_trans_rate_0
ss7_iam_usi_trans_rate_1
ss7_iam_usi_layer1_ident
ss7_iam_usi_layer1_prot
ss7_iam_usi_layer2_ident
ss7_iam_usi_layer2_prot
ss7_iam_usi_layer3_ident
ss7_iam_usi_layer3_prot
ss7_iam_usi_chan_struct
ss7_iam_usi_config
ss7_iam_usi_establish
ss7_iam_usi_symmetry
ss7_iam_usi_rate_multiplier
. ss7_iam_usi_trans_cap is a string variable, the others are all integers
. ss7_iam_usi_trans_cap has options of :
- SPEECH
- UNRESTRICTED
- RESTRICTED
- 31KHZ
- 7KHZ
- 15KHZ
- VIDEO
default value is SPEECH, if the parameter is wrong, set to SPEECH. If not
set, this field is not present
Fixes:
src/ftmod/ftmod_misdn/ftmod_misdn.c: In function 'misdn_handle_mph_information_ind':
src/ftmod/ftmod_misdn/ftmod_misdn.c:871:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 13 has type 'uint64_t' [-Werror=format]
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Do a "soft" wraparound with modulo, removes the ~0.5s tone glitch.
(Multiply ts.rate (samples) by two to match the offset unit (bytes, 2 per sample).)
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Store the offset in the teletone buffer in the b-channel private data.
An NT-mode setup with ftmod_misdn showed severe (dial-)tone distortions
in a sound editor (330Hz sine wave phase errors), caused by
using a global teletone buffer offset.
Switching to a per-channel offset, that is advanced by the amount
of data actually written to the channel, removes (almost) all
distortions.
There is still a minimal phase error every ~500ms (audible) that
needs more investigating.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Might as well import these too...
ftdm_offset_of() - Get offset of member in structure.
ftdm_container_of() - Get pointer to enclosing structure from pointer to structure member.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
ftdm_min(x,y) - Returns the smaller of the two values x and y.
ftdm_max(x,y) - Returns the larger of the two values x and y.
ftdm_clamp(val, min, max) - Returns value that is in the range [vmin,vmax].
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Remove the 'state' variable of per-channel data, use active flag exclusively to track
open/close state.
Add misdn_activate_channel()/misdn_deactivate_channel() helper functions, rename old
one to _misdn_toggle_channel() (internal).
Add _nowait variant of channel de-/activation function, that just sends the mISDN request message.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Store call CRV in caller_data.call_reference and use call private to hold the
FreeTDM channel object.
Remove isdn_data->channels_{local,remote,outbound}_crv arrays.
Allow (and force) inbound call state transition DIALTONE -> DOWN for
incoming RELEASE COMPLETE messages in NT mode.
Dialtone in NT mode works, everything else needs more testing.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
ftmod_misdn currently returns len == 0 if the incoming message,
that triggered the read() call, does not contain any data.
Users of ftdm_channel_read() need to handle this case, or they
may possibly end up in an endless loop.
This patch reworks the ftdm_channel_read() handling in ftmod_isdn
and prevents it from entering an endless loop. The read error counter
is reset on first sucessful read w/ data.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
cc1: warnings being treated as errors
./src/ftmod/ftmod_libpri/ftmod_libpri.c: In function 'msn_filter_foreach':
./src/ftmod/ftmod_libpri/ftmod_libpri.c:422: warning: dereferencing type-punned pointer will break strict-aliasing rules
make: *** [ftmod_libpri_la-ftmod_libpri.lo] Error 1
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Two fixes:
Use ftdm_set_string() instead of sprintf() (seriously, wtf?).
Drop invalid, needless argument to ftdm_log().
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Neither of them accepts extra arguments and ftmod_sangoma_isdn is calling
ftmod_assert() with a char * msg argument.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
The format string checks already caught a couple crash-worthy bugs and this
commit fixes a couple more.
Also includes __ftdm_check_scanf(), for completeness (currently unused).
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
