* The high water check in ast_taskprocessor_alert_set_levels() would
trigger immediately if the new high water level is zero and the queue was
empty.
* The high water check in taskprocessor_push() was off by one.
Change-Id: I687729fb4efa6a0ba38ec9c1c133c4d407bc3d5d
The named aor lock was always being locked for writes so a rwlock adds no
benefit and may be slower because rwlocks are biased toward read locking.
Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28
A new identify_by option was added recently, auth_username. However, this
setting was not added as an allowable choice in the database enumeration
value.
This patch updates the current enumeration, adding in the new setting.
ASTERISK-26268 #close
Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8
If both channels which should be masqueraded
are in the same serializer:
1st channel will be locked waiting condition 'complete'
2nd channel will be locked waiting condition 'suspended'
On heavy load system a chance that both channels will be in
the same serializer 'pjsip/distibutor' is very high.
To reproduce compile res_pjsip/pjsip_distributor.c with
DISTRIBUTOR_POOL_SIZE=1
Steps to reproduce:
1. Party A calls Party B (bridged call 'AB')
2. Party B places Party A on hold
3. Party B calls Voicemail app (non-bridged call 'BV')
4. Party B attended transfers Party A to voicemail using REFER.
5. When asterisk masquerades calls 'AB' and 'BV',
a deadlock is happened.
This patch adds a suspension indicator to the taskprocessor.
When a session suspends/unsuspends the serializer
it sets the indicator to the appropriate state.
The session checks the suspension indicator before
suspend the serializer.
ASTERISK-26145 #close
Change-Id: Iaaebee60013a58c942ba47b1b4930a63e686663b
The extensions table defined two columns (id and priority) as primary key
autoincrement columns. However only one is allowed when defining the primary
key.
This patch removes the autoincrement attribute from the priority column since
it does not need to be as such and really should not have been on there in the
first place.
This patch also removes 'context', 'exten', and 'priority' from the primary key
index and creates a new combined unique contraint index on them.
ASTERISK-26183 #close
Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b
This patch adds a new PJSIP specific dialplan function,
PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media
session will be refreshed via either an UPDATE or re-INVITE request.
When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function,
the formats in use on a PJSIP channel can be re-negotiated and changed
dynamically after call setup.
ASTERISK-26277 #close
Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b
When an RTCP packet is sent or received, res_rtp_asterisk generates a
Stasis event that contains the RTCP report as well as the local and
remote addresses that the report pertains to.
The addresses are determined using ast_find_ourip(). For the local
address, this will typically result in a lookup of the hostname of the
server, and then a DNS lookup of that hostname. If you do not have the
host in /etc/hosts, then this results in a full DNS lookup, which can
potentially block for some time.
This is especially problematic when performing RTCP reads, since those
are done on the same thread responsible for reading and writing media.
This patch addresses the issue by performing a lookup of the local
address when RTCP is allocated. We then use this cached local address
for the Stasis events when necessary.
ASTERISK-26280 #close
Reported by Mark Michelson
Change-Id: I3dd61882c2e57036f09f0c390cf38f7c87e9b556
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
This change replaces the custom unload process for the outbound
publish module with the common serializer shutdown group.
ASTERISK-25217 #close
Change-Id: I280a0384d860c486202d87d2d674394cca77ffb6
This ensures startup is canceled due to allocation failures from the
following initializations.
* channel.c: ast_channels_init
* config_options.c: aco_init
ASTERISK-26265 #close
Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611
On heavy loaded system with IMAP or DB storage,
'app_voicemail' taskprocessor queue could reach 500 scheduled tasks.
It could happen when the IMAP or DB server dies or is unreachable.
It could happen on startup when there are many (thousands)
realtime endpoints configured with unsolicited mwi.
If the taskprocessor queue reaches the high water level
then the alert is triggered and pjsip stops processing new requests
until the queue reaches the low water level to clear the alert.
This patch adds 2 new 'general' configuration options
to tune taskprocessor alert levels:
'tps_queue_high' - Taskprocessor high water alert trigger level.
'tps_queue_low' - Taskprocessor low water clear alert level
ASTERISK-26229 #close
Change-Id: I766294fbffedf64053c0d9ac0bedd3109f043ee8
The regular expression would match causing the code that handled
the line if it was merely a comment to never get executed.
Change-Id: I3e4022481037ebcba9905587fe8c764b4ce21819
SILK is a bit of a hog when it comes to using up our limited number of
dynamic payload types in the RTP engine. By freeing up four slots, it
allows for other codecs to potentially take the place.
Now, codec_silk.so will dynamically use the payload slots in the RTP
engine when it loads.
A better fix would be make RTP dynamic payload types actually
dynamic. However, at this stage of Asterisk 14 development, this is a
risky move that would be imprudent.
Change-Id: I5774e09408f9a203db189529eabdc0d3f4c1e612
(cherry picked from commit d50895c7b0)
This changes the use of an empty regex for both res_sorcery_config
and res_sorcery_memory to "." instead. This is a more compatible
regular expression which also works on FreeBSD.
ASTERISK-26206 #close
Change-Id: Ia9166dd176f1597555ba22b6931180d0626c1388
The strdupa function is a GNU extension, and not widely portable. We
have an ast_strdupa function used within Asterisk which is preferred.
I pulled the definition up from menuselect.c into the menuselect.h
header file so it can be shared across menuselect.
Change-Id: I9593c97f78386b47dc1e83201e80cb2f62b36c2e
* Add 'external' as a support level.
* Add ability for module directories to add entries to the menu
by adding members to the <module_prefix>/<module_prefix>.xml file.
* Expand the description field to 3 lines in the ncurses implementation.
* Allow the description field to wrap in the newt implementation.
* Add description field to the gtk implementation.
Change-Id: I7f9600a1984a42ce0696db574c1051bc9ad7c808
(cherry picked from commit 90f445729d)
