When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
the comments were missed. These have since beed raised in ASTERISK-25476
and elsewhere.
This patch attempts to collect all of the scheduler issues discovered so
far and address them sensibly.
ASTERISK-25476 #close
Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b
Previously, format-attribute modules relied on an existing fmtp line in SDP
negotiation. However, fmtp is optional for several formats like the Opus Codec.
Now, the format-attribute module is called with an empty fmtp, which allows the
module to initialise itself to RFC defaults. Furthermore now, Asterisk is able
to differentiate between internally and externally created formats.
ASTERISK-25537 #close
Change-Id: I28f680cef7fdf51c0969ff8da71548edad72ec52
Since Asterisk 13, formats are immutable and cached. However while loading a
module like chan_sip, some formats were created instead using cached ones.
ASTERISK-25535 #close
Change-Id: I479cdc220d5617c840a98f3389b3bd91e91fbd9b
CALLERPRES() says that it's deprecated in favor of CALLERID(num-pres)
and CALLERID(name-pres). But for channel driver that don't make a
distinction between the two (e.g. SIP), it makes more sense to get/set
both at once. This change reveals the availability of CALLERID(pres),
CONNECTEDLINE(pres), REDIRECTING(orig-pres), REDIRECTING(to-pres) and
REDIRECTING(from-pres).
ASTERISK-25373 #close
Change-Id: I5614ae4ab7d3bbe9c791c1adf147e10de8698d7a
Previously, the wrapping did both lookahead and lookback, which,
together with color escape sequences, caused some lines to be wrapped
way earlier than other lines. This led to inconsistent output.
This simplifies the wrapping code and makes it more sane: if maxcolumns
is hit, we simply jump back to the last space and wrap there.
ASTERISK-25527 #close
Change-Id: I56d01c6f9a812642b1b05535c98d4db48d17c957
In SIP/SDP, Opus has two channels always (see RFC 7587 section 7). The actual
amount of channels is negotiated in-band. Therefore now, the Opus codec and its
attribute rtpmap are registered with two channels.
ASTERISK-24779 #close
Reported by: PowerPBX
Tested by: Alexander Traud
patches:
asterisk-24779.patch submitted by Sean Bright (license #5060)
Change-Id: Ic7ac13cafa1d3450b4fa4987350924b42cbb657b
If a taskprocessor's queue grows large, this can indicate that there
may be a problem with tasks not leaving the processor or else that
the number of available task processors for a given type of task is
too low. This patch makes it so that if a taskprocessor's task queue
grows above 100 queued tasks that it will emit a warning message.
Warning messages are emitted only once per task processor.
ASTERISK-25518 #close
Reported by: Jonathan Rose
Change-Id: Ib1607c35d18c1d6a0575b3f0e3ff5d932fd6600c
When a dial attempt is made that involves a requesting channel, we previously
were not:
a) Protecting access to the native format capabilities structure on the
requesting channel. That is inherently unsafe.
b) Reference bumping the lifetime of the format capabilities structure.
In both cases, something else could sneak in, blow away the format
capabilities, and we'd be holding onto an invalid format_cap structure. When
the newly created channel attempts to construct its format capabilities, things
go poorly.
This patch:
a) Ensures that we get a reference to the native format capabilities while
the requesting channel is locked
b) Holds a reference to the native format capabilities during the creation
of the new channel.
ASTERISK-25522 #close
Change-Id: I0bfb7ba8b9711f4158cbeaae96edf9626e88a54f
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
The contact_status Sorcery objects are currently not destroyed when a contact
is deleted. This causes the contact's last known RTT/status to be 'sticky'
when the contact itself may no longer exist. This patch causes the
contact_status objects associated with both dynamic and static contacts to
be destroyed if the AoR holding those contacts is also destroyed (or via
other paths where a contact may be deleted.)
Change-Id: I7feec8b9278cac3c5263a4c0483f4a0f3b62426e
When an endpoint is deleted (such as through an API), the persistent endpoint
currently continues to lurk around. While this isn't harmful from a memory
consumption perspective - as all persistent endpoints are reclaimed on
shutdown - it does cause Stasis endpoint related operations to continue
to believe that the endpoint may or may not exist.
This patch causes the persistent endpoint related to a PJSIP endpoint to be
destroyed if the PJSIP endpoint is deleted.
Change-Id: I85ac707b4d5e6aad882ac275b0c2e2154affa5bb
The JSON packing for the ContactStatusChange event forgot to include the
roundtrip_usec field. As a result, the field never showed up in any event,
even when the data was available. This patch corrects that error by properly
packing the JSON blob with the data.
Change-Id: I8df80da659a44010afbd48f645967518ff5daa17
This patch adds a new setting "websockets_enabled" to sip.conf.
Setting this to false allows chan_sip to be used without causing
conflicts with res_pjsip_transport_websocket.
ASTERISK-24106 #close
Reported by: Andrew Nagy
Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7
During a stress test of subscriptions, a huge blast of
subscription-related traffic resulted in the threadpool expanding to a
ridiculous number of threads. The balooning of threads resulted in an
increase of memory, which led to a crash due to being out of memory.
An easy fix for the particular test was to limit the size of the
threadpool, thus reining in the amount of memory that would be used. It
was decided that there really is no downside to having a non-infinite
default value for the maximum size of the threadpool, so this change
introduces 50 threads as the maximum threadpool size for the SIP
threadpool.
ASTERISK-25513 #close
Reported by John Bigelow
Change-Id: If0b9514f1d9b172540ce1a6e2f2ffa1f2b6119be
When an AoR is created or destroyed dynamically, the scheduled OPTIONS
requests that qualify the contacts on the AoR are not necessarily started
or destroyed, particularly for persistent contacts created for that AoR.
This patch adds create/update/delete sorcery observers for an AoR, which
schedule/unschedule the qualifies as expected.
Change-Id: Ic287ed2e2952a7808ee068776fe966f9554bdf7d
This patch adds a rule for installing the Super Awesome Company based 'Basic
PBX' configuration files. As part of adding this rule, a bit of the content
that makes up installing the configuration files under the 'samples' target
was refactored into a make subroutine for usage by additional later config
make targets.
Change-Id: I6c2e27906f73e2919a2b691da0be20ae70302404
When compiled with assertions enabled one will occur when destroying
the subscription tree when UAS dialog creation fails. This is because
the code assumes that a dialog will always exist on a subscription
tree when in reality during this specific scenario it won't.
This change makes it so a dialog is not removed from the subscription
tree if it is not present.
ASTERISK-25505 #close
Change-Id: Id5c182b055aacc5e66c80546c64804ce19218dee
Since version 13, Asterisk sent all allowed codecs as callee, even when the
caller did not request/support them. In case of dynamic RTP payloads, this led
to the same ID for different codecs, which is not allowed by SIP/SDP. Now, the
intersection between the requested and the supported codecs is send again.
ASTERISK-24543 #close
Change-Id: Ie90cb8bf893b0895f8d505e77343de3ba152a287
Fixed 1 issue in each of the affected files.
ASTERISK-25494 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I818f149cd66a93b062df421e1c73c7942f5a4a77
Add the ability to filter output from pjsip list and show commands
using the "like" predicate like chan_sip.
For endpoints, aors, auths, registrations, identifyies and transports,
the modification was a simple change of an ast_sorcery_retrieve_by_fields
call to ast_sorcery_retrieve_by_regex. For channels and contacts a
little more work had to be done because neither of those objects are
true sorcery objects. That was just removing the non-matching object
from the final container. Of course, a little extra plumbing in the
common pjsip_cli code was needed to parse the "like" and pass the regex
to the get_container callbacks.
Some of the get_container code in res_pjsip_endpoint_identifier was also
refactored for simplicity.
ASTERISK-25477 #close
Reported by: Bryant Zimmerman
Tested by: George Joseph
Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1
During outbound registration it is possible to receive a fatal (any permanent/
non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due
to a problem with the registrar itself. Upon receiving the failure response
Asterisk terminates outbound registration for the given endpoint.
This patch adds an option, 'fatal_retry_interval', that when set continues
outbound registration at the given interval up to 'max_retries' upon receiving
a fatal response.
ASTERISK-25485 #close
Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2
A crash was seen on a system that ran out of memory due to Asterisk not
checking for vector allocation failures in format_cap.c. With this
change, if either of the AST_VECTOR_INIT calls fail, we will return a
value indicating failure.
Change-Id: Ieb9c59f39dfde6d11797a92b45e0cf8ac5722bc8
A certain situation can result in our attempting to send a NOTIFY on a
destroyed dialog. Say we attempt to send a NOTIFY to a subscriber, but
that subscriber has dropped off the network. We end up retransmitting
that NOTIFY until the appropriate SIP timer says to destroy the NOTIFY
transaction. When the pjsip evsub code is told that the transaction has
been terminated, it responds in kind by alerting us that the
subscription has been terminated, destroying the subscription, and then
removing its reference to the dialog, thus destroying the dialog.
The problem is that when we get told that the subscription is being
terminated, we detect that we have not sent a terminating NOTIFY
request, so we queue up such a NOTIFY to be sent out. By the time that
queued NOTIFY gets sent, the dialog has been destroyed, so attempting to
send that NOTIFY can result in a crash.
The fix being introduced here is actually a reintroduction of something
the pubsub code used to employ. We hold a reference to the dialog and
wait to decrement our reference to the dialog until our subscription
tree object is destroyed. This way, we can send messages on the dialog
even if the PJSIP evsub code wants to terminate earlier than we would
like.
In doing this, some NULL checks for subscription tree dialogs have been
removed since NULL dialogs are no longer actually possible.
Change-Id: I013f43cddd9408bb2a31b77f5db87a7972bfe1e5
When sending a NOTIFY, we lock the dialog and then unlock the dialog
when finished. A recent change made it so that the subscription tree's
dialog pointer will be set NULL when sending the final NOTIFY request
out. This means that when we attempt to unlock the dialog, we pass a
NULL pointer to pjsip_dlg_dec_lock(). The result is that the dialog
remains locked after we think we have unlocked it. When a response to
the NOTIFY arrives, the monitor thread attempts to lock the dialog, but
it cannot because we never released the dialog lock. This results in
Asterisk being unable to process incoming SIP traffic any longer.
The fix in this patch is to use a local pointer to save off the pointer
value of the subscription tree's dialog when locking and unlocking the
dialog. This way, if the subscription tree's dialog pointer is NULLed
out, the local pointer will still have point to the proper place and the
dialog lock will be unlocked as we expect.
Change-Id: I7ddb3eaed7276cceb9a65daca701c3d5e728e63a
