Deadlock is possible in ast_do_pickup() when holding the target channel
lock and trying to get the chan channel lock. Also, holding the target
lock when calling ast_channel_masquerade() is not a good idea because that
routine does deadlock avoidance.
* Removed the need to hold the target lock after marking the target with a
datastore and getting the connected line data off of the target channel.
* Moved can_pickup() to ast_can_pickup() in features.c. Now all the call
pickup methods use the same basic call pickup availability check.
Review: https://reviewboard.asterisk.org/r/1234/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@322749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Create a ring-all queue with 500 permanent agents.
2. Call it.
3. Asterisk will crash.
The watchers array in app_queue.c has a hard limit of 255. Bounds
checking is not done on this array. No sane person should put 255 people
in a ring-all queue, but we should not crash anyway.
* Added bounds checking to the watchers array.
JIRA AST-464
JIRA SWP-2903
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@322484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add documention for unused "options" position to match existing code.
The trunk(v1.10) version will remove the unused options position.
(closes issue #19273)
Reported by: mdavenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@321330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@320823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
imapfolders being set in the general section of voicemail would cause the inbox folder name to
change. Since sound file names are made based on the names of the folders, this would cause
the audio related to that folder name to change and if Asterisk attempted to play it, the
channel would instantly hang up when the audio file couldn't be found. This patch searches for
the name of the folder first to leave existing behavior in tact and if that fails, it uses
the normal inbox name to get the sound file instead.
(closes issue #16104)
Reported by: blkline
Review: https://reviewboard.asterisk.org/r/1215/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@320162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The directed pickup applications can cause a crash if the pickup was
successful because the dialplan keeps executing.
This patch does the following:
* Completes the channel masquerade on a successful pickup before the
application returns. The channel is now guaranteed a zombie and must not
continue executing the dialplan.
* Changes the return value of the directed pickup applications to return
zero if the pickup failed and nonzero(-1) if the pickup succeeded.
* Made some code optimizations that no longer require re-checking the
pickup channel to see if it is still available to pickup.
(closes issue #19310)
Reported by: remiq
Patches:
issue19310_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, remiq, rmudgett
Review: https://reviewboard.asterisk.org/r/1221/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r319528 | twilson | 2011-05-18 13:02:06 -0700 (Wed, 18 May 2011) | 17 lines
Merged revisions 319527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r319527 | twilson | 2011-05-18 12:56:08 -0700 (Wed, 18 May 2011) | 10 lines
Fix app_dial ring groups
Revert part of r315643. We need to remove the datastore here as well.
The code in bridging code will catch anything that app_dial might miss.
(closes issue #19311)
Reported by: mspuhler
Patches:
issue_19311_no_answer.diff uploaded by elguero (license 37)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original patch also increased some buffer sizes, but that was already
done in this version.
(closes issue #17034)
Reported by: sysreq
Patches:
asterisk-issue-17034.patch uploaded by sysreq (license 1009)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parenthesis in the wrong position. Regression from issue #14365 when
expanding conference flags to use 64 bits.
(closes issue #18418)
Reported by: MrHanMan
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@316831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r316475 | seanbright | 2011-05-03 22:23:01 -0400 (Tue, 03 May 2011) | 10 lines
Honor the C option to MeetMe when L is passed.
This fixes a case that r304773 and friends missed.
(closes issue #17317)
Reported by: var
Patches:
meetme-continue-on-l_16218.diff uploaded by var (license 1227)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@316476 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315643 | twilson | 2011-04-26 14:27:44 -0700 (Tue, 26 Apr 2011) | 25 lines
Merged revisions 315596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315596 | twilson | 2011-04-26 14:16:10 -0700 (Tue, 26 Apr 2011) | 18 lines
Allow transfer loops without allowing forwarding loops
We try to avoid the situation where two phones may be forwarded to each other
causing an infinite loop by storing each dialed interface in a channel
datastore and checking the list before dialing out. This works, but currently
breaks situations like A calls B, A transfers B to C, B transfers C to A, and A
transfers C to B. Since human interaction is happening here and not an
automated forwarding loop, it should be allowed.
This patch removes the dialed_interfaces datastore when a call is bridged (a
suggestion from the brilliant mmichelson). If a call is being bridged, it
should be safe to assume that we aren't stuck in a loop.
Since we are now handling this is the bridge code, the previous attempts at
handling it in app_dial and app_queue are removed.
Review: https://reviewboard.asterisk.org/r/1195/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@315644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added fields that are in "core show channel" to dumpchan output.
* Fixed reuse of formatbuf before the previous string stored there was
used by snprintf. All output strings now have their own buffer.
* Adjusted the buffer sizes to not be so abusive of the stack now that
there are more buffers.
Change requested by oej.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@313517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In app_dial.c:wait_for_answer() frames from the inbound channel should be
sent to all outbound channels instead of only if there is just one
outbound channel.
Control frames like AST_CONTROL_CONNECTED_LINE need to be passed to all of
the the outbound channels. This can happen if a blond transfer is done by
a remote switch on the inbound channel.
JIRA AST-443
JIRA SWP-2730
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@313369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312210 | alecdavis | 2011-04-01 21:47:29 +1300 (Fri, 01 Apr 2011) | 29 lines
Merged revisions 312174 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312174 | alecdavis | 2011-04-01 21:29:49 +1300 (Fri, 01 Apr 2011) | 23 lines
voicemail: get real last_message_index and count_messages, ODBC resequence
change last_message_index to read the max msgnum stored in the database
change count_messages to actually count the number of messages.
last_message_index change:
This fixed overwriting of the last message if msgnum=0 was missing.
Previously every incoming message would overwrite msgnum=1.
count_messages change:
allows us to detect when requencing is required in opneA_mailbox.
resequence enabled for ODBC storage:
Assists with fixing up corrupt databases with gaps, but only when
a user actively opens there mailboxes.
(closes issue #18692,#18582,#19032)
Reported by: elguero
Patches:
based on odbc_resequence_mailbox2.1.diff uploaded by elguero (license 37)
Tested by: elguero, nivek, alecdavis
Review: https://reviewboard.asterisk.org/r/1153/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@312211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312103 | alecdavis | 2011-04-01 20:25:54 +1300 (Fri, 01 Apr 2011) | 22 lines
Merged revisions 312070 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312070 | alecdavis | 2011-04-01 19:46:56 +1300 (Fri, 01 Apr 2011) | 16 lines
app_voicemail: close_mailbox needs to respect additional messages while mailbox is open.
close_mailbox leave gaps in message sequence if messages are deleted and new messages
arrive during this time, this is because the shuffle down to slot 0, only shuffles
the number of pre-existing messages when mailbox is opened, ignoring new arrivals.
Fix: in close_mailbox re-evaluate number of messages before the shuffle, this then includes new arrivals.
Happens on filebased or ODBC storage.
(issues #19032,#18582,#18692,#18998)
Reported by: alecdavis,tootai,afosorio
Review: https://reviewboard.asterisk.org/r/1153/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@312117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r310986 | rmudgett | 2011-03-16 13:56:28 -0500 (Wed, 16 Mar 2011) | 28 lines
Dial() o option broke when connected line feature added.
The patch restores the o option behavior and adds the ability to specify
the CallerID. The Dial o and f options are complementary to each other.
The o option stores the CallerID on the outgoing channel as the channel's
CallerID. The f option forces the CallerID sent by the outgoing channel.
o(x) - The argument 'x' is optional. If not present, then specify that
the CallerID that was present on the *calling* channel be stored as the
CallerID on the *called* channel. This was the behavior of Asterisk 1.0
and earlier. If present, then specify the CallerID stored on the *called*
channel. Note that o(${CALLERID(all)}) is similar to option o without
parameters.
f(x) - The argument 'x' is optional and its presence changes the behavior
of this option. If not present, then force the outgoing CallerID on a
call-forward or deflection to the dialplan extension for this Dial() using
a dialplan 'hint'. For example, some PSTNs do not allow CallerID to be
set to anything other than the numbers assigned to you. If present, then
force the outgoing CallerID to 'x'.
Patches:
jira_abe_2752_dial_fo_options.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
JIRA ABE-2752
JIRA SWP-3096
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@311295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308007 | qwell | 2011-02-15 17:33:24 -0600 (Tue, 15 Feb 2011) | 17 lines
Merged revisions 308002 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308002 | qwell | 2011-02-15 17:32:20 -0600 (Tue, 15 Feb 2011) | 10 lines
Fix regression that changed behavior of queues when ringing a queue member.
This reverts r298596, which was to fix a highly bizarre and contrived issue
with a queue member that called into his own queue being transferred back
into his own queue. I couldn't reproduce that issue in any way. I think one
of the other recent transfer fixes actually fixed this.
(closes issue #18747)
Reported by: vrban
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@308010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A bug in AEL did not distinguish between the "s" extension generated by
AEL and an "s" extension that was required to exist by the chan_dahdi
(or another channel) that was not supplied with a starting extension.
Therefore, AEL made incorrect assumptions about what commands were
permissable in the context. This was fixed by making AEL generate a
different extension name. However, Dial and Queue make additional
assumptions about the name of the default gosub extension. Therefore,
they needed to be brought into line with a "macro" rendered by AEL (as
a gosub), without breaking traditional dialplans written without the
aid of AEL.
Related to (issue #18480)
Reported by: nivek
(closes issue #18729)
Reported by: kkm
Patches:
20110209__issue18729.diff.txt uploaded by tilghman (license 14)
018729-dial-queue-gosub-try3.patch uploaded by kkm (license 888)
Tested by: kkm
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@307750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306961 | jpeeler | 2011-02-08 13:25:10 -0600 (Tue, 08 Feb 2011) | 15 lines
Merged revisions 306960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306960 | jpeeler | 2011-02-08 13:18:50 -0600 (Tue, 08 Feb 2011) | 9 lines
Backup file storing message duration is not used with IMAP_STORAGE, remove code.
The message duration is stored in the body of the email when using IMAP_STORAGE,
so nothing needs to happen with the backup file.
(closes issue #18718)
Reported by: kerframil
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
