Without this patch, asterisk creates a temporary file before determining if the
specified command is valid. If invalid, we weren't properly cleaning up the file.
(closes issue #15730)
Reported by: zmehmood
Patches:
M15730.diff uploaded by junky (license 177)
Tested by: zmehmood
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@212763 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If more ports were specified than configured in misdn.conf a reload would crash
asterisk. The problem was the unconfigured port was using data from the
previously configured port. When the data for an unconfigured port was freed a
crash would result from the double free.
(closes issue #12113)
Reported by: agupta
Patches:
bug12113.patch uploaded by jpeeler (license 325)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@212498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There already was code present to be sure that a CANCEL will contain the same branch-id
as the INVITE it is cancelling. However, for INVITES which are challenged downstream,
this mechanism did not work properly. Now this is taken care of.
This is a backport of a fix already present in all 1.6.X branches and in trunk. It also
fixes ABE-1907.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@211807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a partial revert of revision 82590, which was an attempted cleanup,
but in reality, it broke QUEUE_MEMBER_LIST, which has always been intended
as a method by which component interfaces could be queried from the queue.
Membername isn't useful here, because that field cannot be used to obtain
further information about the member. See the documentation on
QUEUE_MEMBER_LIST, RemoveQueueMember, QUEUE_MEMBER_PENALTY, and the various
AMI commands which take a member argument for further justification.
(closes issue #15664)
Reported by: rain
Patches:
app_queue-queue_member_list.diff uploaded by rain (license 327)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@211038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Issue 15655: For the case where dialing is complete for an incoming
call, dahdi_new() was asked to start the PBX and then the code set more
channel variables. If the dialplan hungup before these channel variables
got set, asterisk would likely crash.
* Fixed potential for overlap incoming call to erroneously set channel
variables as global dialplan variables if the ast_channel structure failed
to get allocated.
* Added missing set of CALLINGSUBADDR in the dialing is complete case.
(closes issue #15655)
Reported by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@210575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the imapstorage.txt documentation to reflect that issues with
c-client versions older than 2007 seem to cause crashing issues that
are not seen with more recent versions. Documentation has been updated
to reflect this.
(closes issue #14496)
Reported by: vbcrlfuser
Patches:
__20090727-imap-documentation-patch.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, mmichelson, dbrooks
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@210563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ensure that system headers located in /usr/local/include are actually treated
as system headers by the compiler, and not as local headers which are subject
to warnings from the -Wundef compiler option and others.
(closes issue #15606)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@210237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a wildcard extension in the dialplan (for example, _*.) would take
precedence over picking up a call in the channel's pickup group. This patch simply moves
the block of code handling pickup group matching to above the extension matching code.
(closes issue #14735)
Reported by: stevedavies
Review: https://reviewboard.asterisk.org/r/319/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@210067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Milliwatt() was changed internally to use Playtones() so that the proper
tone was used, it introduced a drop in gain in the output signal. So, use
the playtones API directly and specify a volume argument such that the output
matches the gain of the original Milliwatt() code.
(closes issue #15386)
Reported by: rue_mohr
Patches:
issue_15386.rev2.diff uploaded by russell (license 2)
Tested by: rue_mohr
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@209838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The latest GCC (what will become 4.5.x) has a few new warnings, that in these
cases found some either downright buggy code, or at least seriously poorly
designed code that could be improved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@209759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@209131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pthread_self returns a pthread_t which is not an unsigned int on all
pthread implementations. Casting it to an unsigned int fixes compiler warnings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@208990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mostly trivial changes, but I did not know of any other way to fix the
"dereferencing type-punned pointer will break strict-aliasing rules" error
without creating a tmp variable in chan_skinny.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@208746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I know what some of you are thinking: "UGH! Mark, why are you using
ast_strdup and ast_free for the string when you can just use ast_strdupa
and let the memory free itself?! Have the bats been chewing on your brain
again?"
Based on past experiences, I don't like using ast_strdupa inside a loop.
It's a good way to potentially exhaust stack space. Also, since this only
happens when reloading queues, I don't think that heap allocations and
frees are going to be a huge problem.
(closes issue #15559)
Reported by: amorsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@208622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For cases where Asterisk sends an INVITE and receives a non 2XX final
response, Asterisk would follow the INVITE transaction by immediately
sending a BYE, which was unnecessary.
(closes issue #14575)
Reported by: chris-mac
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@208587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This generalizes the fix for issue 13849. The initial fix corrected the
problem that Asterisk would reply with a 491 if a reinvite were received
from an endpoint and we had not yet received an ACK from that endpoint
for the initial INVITE it had sent us. This expansion also allows Asterisk
to appropriately handle an INVITE with authorization credentials if Asterisk
had not received an ACK from the previous transaction in which Asterisk had
responded to an unauthorized INVITE with a 407.
(closes issue #14239)
Reported by: klaus3000
Patches:
14239.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@208386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes URIENCODE and QUOTE behave similarly, since the documentation
states that the argument is not optional, for both.
(closes issue #15439)
Reported by: pkempgen
Patches:
20090706__issue15439.diff.txt uploaded by tilghman (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was already code for other signaling types in dahdi_handle_event to
handle dialing if a dial operation dial string was present. Simply add
SIG_EMWINK to the list.
(closes issue #14434)
Reported by: araasch
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new dahdi_wait function to specifically wait for the wink
event. If the wink is not eventually received the channel is hung up.
(closes issue #14434)
Reported by: araasch
Patches:
emwinkmod uploaded by araasch (license 693)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Copied from Review board:
In issue 12434, the reporter describes a situation in which audio and video
is offered on the call, but because videosupport is disabled in sip.conf,
Asterisk gives no response at all to the video offer. According to RFC 3264,
all media offers should have a corresponding answer. For offers we do not
intend to actually reply to with meaningful values, we should still reply
with the port for the media stream set to 0.
In this patch, we take note of what types of media have been offered and
save the information on the sip_pvt. The SDP in the response will take into
account whether media was offered. If we are not otherwise going to answer
a media offer, we will insert an appropriate m= line with the port set to 0.
It is important to note that this patch is pretty much a bandage being
applied to a broken bone. The patch *only* helps for situations where video
is offered but videosupport is disabled and when udptl_pt is disabled but
T.38 is offered. Asterisk is not guaranteed to respond to every media offer.
Notable cases are when multiple streams of the same type are offered.
The 2 media stream limit is still present with this patch, too.
In trunk and the 1.6.X branches, things will be a bit different since Asterisk
also supports text in SDPs as well.
(closes issue #12434)
Reported by: mnnojd
Review: https://reviewboard.asterisk.org/r/311
Review: https://reviewboard.asterisk.org/r/313
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I changed this check to only happen in a dev-mode build. I also added a
comment explaining what is going on. I also made it so that detection of
this situation does not affect ast_read() operation.
(closes issue #14723)
Reported by: seadweller
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
