This fixes two main issues:
1. Asterisk would send a CANCEL to the route created by the provisional response
instead of using the same destination it did in the initial INVITE.
2. If a new route set arrives in a 200 OK than was in the 1XX response (perfectly
possible if our outbound INVITE gets forked), then the route set in the 200 OK
needs to overwrite the route set in the 1XX response.
(closes issue ASTERISK-19358)
Reported by: Karsten Wemheuer
Tested by: Karsten Wemheuer
patches:
ASTERISK-19358.patch uploaded by Mark Michelson (license 5049)
ASTERISK-19358.patch uploaded by Stefan Schmidt (license 6034)
Review: https://reviewboard.asterisk.org/r/1749
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I made this change initially, I was under the false impression that the
audiohooks structure remained on the channel after all of the hooks had been
detached. This is not the case, ast ast_read takes care of removing the
audiohooks structure if the lists are empty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principle difference between libvorbisfile v1.1.2 and newer (at least
v1.2.0) is the addition of the predefined callbacks OV_CALLBACKS_xxx in
vorbis/vorbisfile.h used for ov_open_callbacks().
* Updated the configure script to detect if libvorbisfile.h declares
OV_CALLBACKS_NOCLOSE.
* Copied the declaration of OV_CALLBACKS_NOCLOSE from v1.2.0 to allow
v1.1.2 to compile.
(closes issue ASTERISK-19370)
Reported by: Jonn Taylor
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Back in r646, TRUNK_CALL_START was added and defined as 0x4000. That same value
was also hard-coded in one part of the IAX2 code instead of using the #define.
TRUNK_CALL_START has changed over the years (for dealing with LOW_MEMORY), but
the hard-coded usage was never updated to match. This patch fixes that.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ogg/vorbis was fairly useless as a voicemail file format because it did
not implement the seek and tell format callbacks among other problems.
Since we were already using the libvorbis and libvorbisenc libraries we
can use libvorbisfile as it is also part of the vorbis library package.
* Made use the libvorbisfile to handle the ogg/vorbis file stream. The
format_ogg_vorbis.c is now mostly a wrapper around libvorbisfile.
(closes issue ASTERISK-16926)
Reported by: sque
Patches:
ogg_vorbis_use_libvorbisfile.patch (license #6108) patch uploaded by sque
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was causing identification that should have been
made private to be public.
(closes issue AST-814)
reported by Patrick Anderson
Patches:
chan_sip.c.diff uploaded by Patrick Anderson (license 5430)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_apathetic_reply takes the incoming frame's source call number as the
destination call number for the outgoing frame. If the incoming frame was a
full frame, then the high order bit of the source call number is set and will be
interpreted as a retransmit when sent back out as the destination call number.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since the dir timestamp is available at one second resolution, we cannot
know if it was updated within the same second after we scanned it.
Therefore, we will force another scan if the dir was just modified.
* Changed to force another scan if the directory was just modified.
(closes issue ASTERISK-19081)
Reported by: Knut Bakke
Review: https://reviewboard.asterisk.org/r/1688/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There can only be one database connection in res_config_pgsql just like
res_config_sqlite. If the connection is lost, the connection may not get
reestablished to the same database if the res_pgsql.conf and
extconfig.conf files are inconsistent.
* Made only use the configured database from res_pgsql.conf.
* Fixed potential buffer overwrite of last[] in config_pgsql().
(closes issue ASTERISK-16982)
Reported by: german aracil boned
Review: https://reviewboard.asterisk.org/r/1731/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
open_mailbox() was changed quite a long time ago to allocate this memory.
close_mailbox() should have been changed to be responsible for freeing it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The astman_get_header() never returns NULL so the check by the code for
NULL would never fail.
(closes issue ASTERISK-16974)
Reported by: Nuno Borges
Patches:
0018325.patch (license #6116) patch uploaded by Nuno Borges (modified)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354835 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CDRs cannot be modified after a bridge is torn down, (e.g. after
Dial() returns) even though the CDR() function may be called. Since
modifying the CDR code to change this behavior could very easily
break all kinds of things, this patch just documents this limitation.
(closes issues ASTERISK-16923)
Review: https://reviewboard.asterisk.org/r/1720/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config parser in Asterisk does not currently remove a backslash that is
used to escape a semicolon which would otherwise be interpreted as the start
of a comment.
The change here causes that backslash to be removed, but does not create a
real escape system in the config parser. The biggest complication with a real
escape system would be breaking existing configs everywhere (parsing \\ as \
and breaking on escaped non-semicolon characters) even though it would be the
"right" way to do things.
(closes issue ASTERISK-17121)
Review: https://reviewboard.asterisk.org/r/1724/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes it so computational cost is not taken into account
when deciding if a multistep path is better than a single-step path. This
means that the only time a multistep path will be chosen is if no single-step
path exists. This ensures a better quality translation even if it turns out
to be slightly slower.
(closes issue ASTERISK-16821)
reported by Andrew Lindh
Review: https://reviewboard.asterisk.org/r/1715
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-18924, SIP INFO DTMF handlingw as changed to account for both
lowercase alphatbetic DTMF events, as well as uppercase alphabetic DTMF
events. When this occurred, the comparison of the character buffer containing
the event code was changed such that the buffer was first compared again '0'
and '9' to determine if it was numeric. Unfortunately, since the first
character in the buffer will typically be '1' in the case of non-numeric
event codes (10-16), this caused those codes to be converted to a DTMF event
of '1'. This patch fixes that, and cleans up handling of both
application/dtmf-relay and application/dtmf content types.
Review: https://reviewboard.asterisk.org/r/1722/
(closes issue ASTERISK-19290)
Reported by: Ira Emus
Tested by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes some unnecessary locking of the channels container in
ast_hangup(). The reason this came up is that this lock can very quickly block
the entire system. If any of the channel cleanup code decides to block, it
causes a problem for the whole system. For example, when audiohooks get
destroyed, if that blocks for a while waiting on the mixmonitor thread to exit
because it's busy blocking on some I/O, it causes a problem for many other
threads in the meantime.
Review: https://reviewboard.asterisk.org/r/1712/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354492 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Set lastms to 0 when clearing instead of ""
2. Don't set ipaddr or port to the string "(null)" when they are empty
3. Add missing required fields, set default for lastms to 0, and modify
the length of the ipaddr field to 45 in the Postgresql realtime.sql
file.
(closes issue ASTERISK-19172)
Review: https://reviewboard.asterisk.org/r/1703/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, attempts to reload cdr_pgsql.so would cause the column list to keep
its current data and then add a second copy during the reload. This would cause attempts
to log the CDR to the database to fail. This patch also cleans up some unnecessary null
checks for ast_free and deals with a few potential locking problems.
(closes issue ASTERISK-19216)
Reported by: Jacek Konieczny
Review: https://reviewboard.asterisk.org/r/1711/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Documented dialplan add extension <exten>,<priority>,<app(<app-data>)>
format.
* Allow acceptance of command without the app-data value. There are many
applications that do no need any parameters so it is silly to require that
field for all commands.
* Fixed a couple ast_malloc/ast_free mismatches with ast_add_extension2()
calls.
(closes issue ASTERISK-19222)
Reported by: Andrey Solovyev
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI UnParkedCall event was missing the Parkinglot and Uniqueid headers
that the AMI ParkedCall event contains.
(closes issue ASTERISK-19240)
Reported by: Michael Yara
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bad locking order was added to chan_agent to prevent segfaults from having no locking
in a patch by irroot. This patch addresses the bad locking order by releasing locks before
getting the right locking order to stop deadlocks from occuring when doing multiple
interactions with agents.
(closes issue ASTERISK-19285)
Reported by: Alex Villacis Lasso
Review: https://reviewboard.asterisk.org/r/1708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
(closes issue ASTERISK-18951)
Reported-by: Kristijan Vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some reason this function was completely undocumented in 1.8. I copied the
10 docs over to 1.8 and removed references to an enumerator that was added in
the Asterisk 10 version of func_curl. That was the only change I noted.
(closes issue ASTERISK-19186)
Reported by: Olivier Krief
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_AUDIOHOOK_TRIGGER_WRITE and AST_AUDIOHOOK_WANTS_DTMF were overlapping which
may have caused unintended side effects. This patch moves
AST_AUDIOHOOK_TRIGGER_WRITE, and updates AST_AUDIOHOOK_TRIGGER_MODE to reflect
the original intention.
This will affect existing modules that use these flags, so be sure to recompile
as necessary.
(closes issue ASTERISK-19246)
Reported by: feyfre
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353598 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Clarified that using the VERBOSITY setting in etc_default_asterisk is the
same as using the -v command line switch, which causes Asterisk to launch
in console mode.
(closes issue ASTERISK-17030)
Reported by: Jonas
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The calendaring tech modules depend on res_calendar and initially
res_calendar just bumped the use count so that it couldn't be unloaded.
res_calendar can potentially create many threads and I've seen issues
where the Asterisk shutdown has failed where it looked like these
threads could be the culprit.
This patch adds unload support for res_calendar. Unloading res_calendar
will also unload the dependant tech modules as well.
(closes issue ASTERISK-16744)
Review: https://reviewboard.asterisk.org/r/1657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak of vars in error paths for action_originate().
* Moved struct fast_originate_helper tech and data members to stringfields.
* Simplified ActionID header handling for fast_originate().
* Added doxygen note to ast_request() and ast_call() and the associated
channel callbacks that the data/addr parameters should be treated as const
char *.
Review: https://reviewboard.asterisk.org/r/1690/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1699/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
