refactored to use these events rather than producing the events directly
in channel.c. Finally, the code was added to app_stasis to produce
DTMF events on the WebSocket.
The AMI events are completely backward compatible, including sending
events on transmitted DTMF, and sending DTMF start events.
The Stasis-HTTP events are somewhat simplified. Since DTMF start and
DTMF send events are generally less useful, Stasis-HTTP will only send
events on received DTMF end.
(closes issue ASTERISK-21282)
(closes issue ASTERISK-21359)
Review: https://reviewboard.asterisk.org/r/2439
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch calculates the timestamp for outbound RTP when we don't have timing
information. This uses the same approach in res_rtp_asterisk. Thanks to both
Pietro and Tzafrir for providing patches.
(closes issue ASTERISK-19883)
Reported by: Giacomo Trovato
Tested by: Pietro Bertera, Tzafrir Cohen
patches:
rtp-timestamp-1.8.patch uploaded by tzafrir (License 5035)
rtp-timestamp.patch uploaded by pbertera (License 5943)
........
Merged revisions 385636 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385637 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a read error in snd_pcm_readi would still be treated as a
nominal result when constructing a voice frame from the expected data. Since
the value returned is negative, as opposed to the number of samples read,
this could result in a crash. With this patch, we now return a null frame
when a read error is detected.
Note that the patch on ASTERISK-21329 was modified slightly for this commit,
in that we bail immediately on detecting the read error, rather than bypassing
the construction of the voice frame.
(closes issue ASTERISK-21329)
Reported by: Keiichiro Kawasaki
patches:
chan_alsa.diff uploaded by kawasaki (License 6489)
........
Merged revisions 385633 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385634 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report was that app_voicemail would crash. This was caused by
ast_config_load() returning CONFIG_STATUS_FILEINVALID but no checks being
performed for that return status. After adding the initial patch to fix this
issue, Jaco Kroon (jkroon) added some fixes to memory leaks he had discovered.
During review, Walter Doekes (wdoekes) suggested adding a helper function in
order to determine if we had a valid configuration or not.
This patch does the following:
* Creates a helper function to check if the configuration is valid
* Adds calls to the new helper function where appropiate
* Fixes memory leaks where the code returned without running
ast_config_destroy() on the configuration that was loaded
(closes issue ASTERISK-21302)
Reported by: Jaco Kroon
Tested by: Jaco Kroon, Michael L. Young
Patches:
asterisk-11.3.0-app_voicemail-ast_config-fixes.patch
Jaco Kroon (license 5671)
asterisk-21302-valid_cfg_and_mem_leaks_v3-1.8.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2443/
........
Merged revisions 385551 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385557 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These functions are already used in one branch (jrose's parking branch)
and will soon be used in other branches as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we reload Asterisk or chan_sip, the flags force_rport and comedia that are
turned on and off when using the auto_force_rport and auto_comedia nat settings
go back to the default setting off. These flags are turned on when needed or
off when not needed at the time that a peer registers, re-registers or initiates
a call. This would apply even when only the default global setting
"nat=auto_force_rport" is being used, which in this case would only affect the
force_rport flag.
Everything is good except for the following: The nat setting is set to
auto_force_rport and auto_comedia. We reload Asterisk and the peer's
registration has not expired. We load in the settings for the peer which turns
force_rport and comedia back to off. Since the peer has not re-registered or
placed a call yet, those flags remain off. We then initiate a call to the peer
from the PBX. The force_rport and comedia flags stay off. If NAT is involved,
we end up with one-way audio since we never checked to see if the peer is behind
NAT or not.
This patch does the following:
* Moves the checking of whether a peer is behind NAT into its own function
* Create a function to set the peer's NAT flags if they are using the auto_* NAT
settings
* Adds calls in sip_request_call() to these new functions in order to setup the
dialog according to the peer's settings
(closes issue ASTERISK-21374)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-21374-auto-nat-outgoing-fix_v2.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2421/
........
Merged revisions 385473 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385474 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On startup, it's possible for a frame to arrive before the processing threads were ready.
In iax2_process_thread() the first pass through falls into ast_cond_wait, should a frame arrive
before we are at ast_cond_wait, the signal will be ignored.
The result iax2_process_thread stays at ast_cond_wait forever, with deferred frames being queued.
Fix: When creating initial idle iax2_process_threads, wait for init_cond to be signalled
after each thread is started.
(issue ASTERISK-18827)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2427/
........
Merged revisions 385402 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385403 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
Add dependency on libuuid, for res_rtp_asterisk
pjproject is what actually requires libuuid.
(closes issue ASTERISK-21125)
reported by Private Name
(Ed. note: Really? Private Name? I am rolling my eyes so hard right now.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
protected by the features_lock.
* Made all calls to ast_find_call_feature() have the features_lock held.
* Fixed set_config_flags() to actually use find_group() to look for
feature groups in DYNAMIC_FEATURES. The code originally assumed all
feature groups were listed in DYNAMIC_FEATURES.
* Make everyone use ast_rdlock_call_features(),
ast_unlock_call_features(), and new ast_wrlock_call_features() instead of
directly calling the rwlock API on features_lock.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the events that have been ported to Stasis, this was broken in
r384910, when a couple of lines of code was lost in a merge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When MALLOC_DEBUG is enabled with res_config_ldap, issues (munmap_chunk:
invalid pointer errors) can occur as the memory is being allocated with
Asterisk's wrappers around malloc/calloc/free/strdup, as opposed to the
LDAP library's wrappers.
This patch uses the LDAP library's wrappers where appropriate, so that
compiling with MALLOC_DEBUG doesn't cause more problems than it solves.
Note that the patch listed below was modified slightly for this commit
to account for some additional memory allocation/deallocations.
(closes issue ASTERISK-17386)
Reported by: John Covert
Tested by: Andrew Latham
patches:
issue18789-1.8-r316873.patch uploaded by seanbright (License 5060)
........
Merged revisions 385190 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385199 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a BYE request is processed in chan_sip, the current SIP dialog is detached
from its associated Asterisk channel structure. The tech_pvt pointer in the
channel object is set to NULL, and the dialog persists for an RFC mandated
period of time to handle re-transmits.
While this process occurs, the channel is locked (which is good).
Unfortunately, operations that are initiated externally have no way of knowing
that the channel they've just obtained (which is still valid) and that they are
attempting to lock is about to have its tech_pvt pointer removed. By the time
they obtain the channel lock and call the channel technology callback, the
tech_pvt is NULL.
This patch adds a few checks to some channel callbacks that make sure the
tech_pvt isn't NULL before using it. Prime offenders were the DTMF digit
callbacks, which would crash if AMI initiated a DTMF on the channel at the
same time as a BYE was received from the UA. This patch also adds checks on
sip_transfer (as AMI can also cause a callback into this function), as well
as sip_indicate (as lots of things can queue an indication onto a channel).
Review: https://reviewboard.asterisk.org/r/2434/
(closes issue ASTERISK-20225)
Reported by: Jeff Hoppe
........
Merged revisions 385170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 385173 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The hash and compare functions for the control container was reusing
the wrong ones, causing some problems. I fixed it, but in the wrong
branch. Oh well, it happens.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The settings saved on the channel for FEATURE()/FEATUREMAP() were only
for that channel. This patch adds the ability to have these settings
inherited to child channels if you set FEATURE(inherit)=yes.
Closes issue ASTERISK-21306.
Review: https://reviewboard.asterisk.org/r/2415/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch sets the protocols container provided by res_http_websocket to NULL
when the module gets unloaded and adds the necessary checks when adding/
removing a websocket protocol. This prevents some FRACKing on an invalid
pointer to the disposed container if a module that uses res_http_websocket is
unloaded after it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the API that binds the Stasis dialplan application to external
Stasis applications. It also adds the beginnings of WebSocket
application support.
This module registers a dialplan function named Stasis, which is used
to put a channel into the named Stasis app. As a channel enters and
leaves the Stasis diaplan application, the Stasis app receives a
'stasis-start' and 'stasis-end' events.
Stasis apps register themselves using the stasis_app_register and
stasis_app_unregister functions. Messages are sent to an application
using stasis_app_send.
Finally, Stasis apps control channels through the use of the
stasis_app_control object, and the family of stasis_app_control_*
functions.
Other changes along for the ride are:
* An ast_frame_dtor function that's RAII_VAR safe
* Some common JSON encoders for name/number, timeval, and
context/extension/priority
Review: https://reviewboard.asterisk.org/r/2361/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
This issue is also present in Asterisk 1.8 and a separate patch will be applied
to it.
(issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_v4.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2385/
........
Merged revisions 384827 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_proceeding option causes Asterisk to assume inband audio
may be present when a PROCEEDING message is received.
Q.931 Section 5.1.2 says the network cannot assume that the CPE side has
attached to the B channel at this time without explicitly sending the
progress indicator ie informing the CPE side to attach to the B channel
for audio. However, some non-compliant ISDN switches send a PROCEEDING
without the progress indicator ie indicating inband audio is available and
assume that the CPE device has connected the media path for listening to
ringback and other messages.
ASTERISK-17834 which causes this issue was dealing with a non-compliant
network switch.
(closes issue ASTERISK-21151)
Reported by: Gianluca Merlo
Tested by: rmudgett
........
Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 384689 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OBJ_PARTIAL_KEY searching a rbtree did not find all possible matches if
the container did not accept duplicates.
Added matching node bias to indicate which matching node is being searched
for: first, last, any.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r383579 was committed, it made Jansson a required dependency.
While libjansson-dev and jansson-devel are available on recent
distros, some older (but still supported) distros don't have
it. There's a pull request[1] to get it into repoforge, but that still
doesn't help everyone. (And helps no one until the pull request is
merged and packages are built).
This patch adds Jansson install from source to the install_unpackaged()
function. There are a few gotcha's, which makes this change not
completely trivial.
* Since Jansson may be installed by a package, don't install from
source if a package installation can be found
* libresample may also be installed via package, so I added a
similar check to that.
* Since Jansson installs into /usr/local, this patch also adds
/usr/local/lib to /etc/ld.so.conf.d so that the library can be
found.
* The alternative was to install into /usr, but then it gets
complicated having to deal with EL's /usr/lib{32,64} shenanigans.
[1]: https://github.com/repoforge/rpms/pull/250
Review: https://reviewboard.asterisk.org/r/2414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a bug introduced in r76703, wherein Asterisk could only parse
arguments in the so-called 'recommended' way, e.g., NoOp(foo,bar). The proper
syntax of NoOp,foo|bar is now parsed correctly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an issue of message ordering that occurs when
multiple topics are forwarded to an aggregator topic (such as
ast_channel_topic_all()).
It is (very reasonably) expected that the rules governing message
dispatch order still apply, so long as the messages start from the
same thread, and are received by the same subscription. Because the
existing code had an additional layer of dispatching via the Stasis
thread pool for forwards, those promises couldn't be kept.
Forwarding subscriptions no longer have their own mailbox, and now
dispatch directly from the forwarding topic's stasis_publish()
call. This means that the topic's lock is held for the duration of not
only a message's dispatch, but the dispatch of all the forwards. This
shouldn't be a problem right now, but if an aggregator topic had many
subscribers, it could become a problem. But I figure we can write more
clever code when the time comes, if necessary.
Review: https://reviewboard.asterisk.org/r/2419/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch migrates the TestEvent AMI events to first be dispatched over the
Stasis-Core message bus. This helps to preserve the ordering of the events
with other events in the AMI system, such as the various channel related
events.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
At least one call to run_externnotify provides a NULL context parameter and
because the snprintf statement doesn't account for a NULL context parameter,
it simply writes '(null)' to the arguments string instead. This patch makes
it write two quotes back to back for that argument instead in the event of
a NULL context.
(closes issue ASTERISK-18207)
Reported by: Barry L. Kline
Patches:
modified from patch-20130306 uploaded by Karsten Wemheuer (License 5930)
........
Merged revisions 384325 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 384326 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Updated test_uuid.c to test the new API call.
* Made system use the new API call to eliminate "10's of lines" where
used.
* Fixed untested ast_strdup() return in stasis_subscribe() by eliminating
the need for it. struct stasis_subscription now contains the uniqueid[]
string.
* Fixed some issues in exchangecal_write_event():
Create uid with enough space for a UUID string to avoid a realloc.
Fix off by one error if the calendar event provided a UUID string.
There is no need to check for NULL before calling ast_free().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
