While looking at ASTERISK-22236, Walter Doekes pointed out that when running
"sip show peers", the setting being displayed can be confusing. The display of
"N" used to mean NAT (i.e. yes). The NAT setting has gone through many
different changes resulting in the display of different characters to try and
convey what the current setting is for 'Forcerport' (A for Auto and Forcerport
is currently on, a for Auto but Forcerport is off, Y for yes, and N for no).
During the initial code review to try and clarify these settings (especially
since "N" no longer meant what it used to mean in prior versions of Asterisk),
Mark Michelson suggested using the full space available to display the settings
which helped to make the settings very clear. That was a great suggestion.
Therefore, this patch does the following:
* The column for 'Forcerport' now will show: Auto (Yes), Auto (No), Yes, or No.
* A column for the 'Comedia' setting has been added. It too will display the
setting in a non-cryptic way: Auto (Yes), Auto (No), Yes, or No.
* UPGRADE.txt has been updated to document this change.
(closes issue ASTERISK-22728)
Reported by: Walter Doekes
Tested by: Michael L. Young
Patches:
asterisk-forcerport-display-clarification_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2941
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In function ast_rtp_instance_early _bridge_make_compatible the
use of instance 0/1 as arguments doesn't clearly communicate a
direction that the copying of payloads from the source channel
to the destination channel will occur, making it more probable
to have the arguments to ast_rtp_codecs_payloads_copy() put in
the reverse order. This patch renames the arguments with _dst
and _src suffixes and corrects the copy direction.
(closes issue ASTERISK-21464)
Reported by: Kevin Stewart
Review: https://reviewboard.asterisk.org/r/2894/
........
Merged revisions 402000 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Test shows rtpmap:119 being copied per this change, but is not in sip invite
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a bug where a zero length callerid match adjacent to a no
match callerid extension entry would be deleted together, which then
resulted in hashtable references to free'd memory. A third state of
the matchcid value has been added to indicate match to any extension
which allows enforcing comparison of matchcid on/off without errors.
(closes issue AST-1235)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2930/
........
Merged revisions 401959 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adapts the behaviour of avpf to only impact the format of outgoing calls. For
inbound calls, both AVP and AVPF calls will be accepted regardless of the value
of avpf in the configuration.
(closes issue ASTERISK-22005)
Reported by: Torrey Searle
Patches:
optional_avpf_trunk.patch uploaded by tsearle (license 5334)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If one specified a verbose level within a logging facility in
logger.conf then any component after it was ignored. Fixed so
all values are correctly read.
(closes issue ASTERISK-22456)
Reported by: Kevin Harwell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Final set of patches in a series of memory leak/cleanup patches by Corey Farrell
(closes issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
main-utils-1.8.patch uploaded by coreyfarrell (license 5909)
main-utils-11.patch uploaded by coreyfarrell (license 5909)
main-utils-12up.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401829 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401704 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If preferred codecs included any non-audio format the code would
mistakenly add the audio format, even if it was not a joint capability
with the remote side.
(closes issue ASTERISK-21131)
Reported by: nbougues
Patches:
patch_unsupported_codec_1.8.patch uploaded by nbougues (license 6470)
........
Merged revisions 401497 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r400089, a patch was put in to correct erroneous RTCP statistic resets.
Unfortunately, ast_rtp_read can be called on an RTP instance that does not
have RTCP information. This patch prevents that crash by only resetting
the statistics if we do actually have an RTCP instance.
(issue AST-1174)
(closes issue ASTERISK-22667)
Reported by: John Bigelow
........
Merged revisions 401445 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The queue_log entry resulting from CLI "queue remove member" when
log_membername_as_agent is enabled is wrong. It always uses the interface
name instead of the member name in the queue_log entry.
* Get the queue member before removing it from the queue so the member
name is available for the queue_log entry.
(closes issue ASTERISK-21826)
Reported by: Oscar Esteve
Patches:
fix_membername.diff (license #6505) patch uploaded by Oscar Esteve
(modified to fix potential ref leak)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transferring an analog call using flashhooks generated an unable to get
index WARNING message when the transfer is completed.
* Removed unnecessary analog subchannel shell games when transferring a
call using flashhooks.
Thanks to Tzafrir Cohen for mentioning this in a comment on issue
ASTERISK-22720.
........
Merged revisions 401378 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
isn't installed
Include the appropriate declarations when not using termcap, but term+curses
and [n]curses do not exist.
(closes issue ASTERISK-22351)
Reported by: A. Iglesias
Patches:
issueA22351_libedit_internal_without_ncurses_dev.patch uploaded by wdoekes (license 5674)
........
Merged revisions 401325 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When trying to determine if a peer is behind NAT, we should not be using the
ports when comparing addresses.
This patch removes the port from being checked and just useds the addresses
now.
(closes issue ASTERISK-22729)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-remove-using-port-for-nat-check.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2927/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r378303 the AST_FLAG_DISABLE_DEVSTATE_CACHE flag was added that tells
the devstate system to not cache states for non-real devices. However,
when optimizing away channels (ast_do_masquerade), that flag wasn't
copied.
In my case, using Local devices as queue members created a situation
where the endpoint was considered in use, but the state change of the
device being available again was ignored (not cached). The endpoint
channel was optimized into the (previously) Local channel, but kept
the do-not-cache flag. The end result being that the queue member
apparently stayed in use forever.
(closes issue ASTERISK-22718)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/2925/
........
Merged revisions 401178 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Drop an error log message to debug level 1 since distributed device
state functions correctly when receiving this message and it spams the
logs.
(closes issue ASTERISK-22410)
Reported by: abelbeck
Patches:
asterisk-1.8-res_jabber-log-nonpubsub-error-to-debug.patch uploaded by abelbeck (License 5903)
asterisk-11-res_xmpp-log-nonpubsub-error-to-debug.patch uploaded by abelbeck (License 5903)
........
Merged revisions 401119 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remember the swgain setting from CLI "dahdi set swgain" command so the
CLI "dahdi show channel" output will reflect the current setting.
* Updated CLI "dahdi set hwgain" and "dahdi set swgain" documentation.
(issue ASTERISK-22429)
Reported by: Jaco Kroon
Patches:
jira_asterisk_22429_v1.8_v2.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 400907 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bumping the SDP version number can cause interoperability problems
since receivers of the responses will expect that a 200 SDP will
be identical to a previous 183 SDP.
(closes issue ASTERISK-21204)
reported by NITESH BANSAL
Patches:
dont-increment-session-version-in-2xx-after-183.patch uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 400906 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When running configure, libiodbc2 development headers will fulfill the
requirement for ODBC development headers, but will not function
properly. This adds a warning when libiodbc2 development headers are
detected instead of unixodbc development headers.
(closes issue ASTERISK-22459)
Reported by: Patrick Maille
Tested by: Walter Doekes
Patches:
issueA22459_warn_when_using_iodbc.patch uploaded by Walter Doekes (License 5674)
........
Merged revisions 400767 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge now has the ability to set the language of announcements to the
conference. The language can be set on a bridge profile in
confbridge.conf or by the dialplan function
CONFBRIDGE(bridge,language)=en.
(closes issue ASTERISK-19983)
Reported by: Jonathan White
Patches:
M19983_rev2.diff (license #5138) patch uploaded by junky (modified)
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400741 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed looking in the wrong profiles container to see if the default_user
profile is already created in verify_default_profiles(). The bridge
profile container is never going to hold user profiles. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AST_CONFIG dialplan function defined in func_config.c allocates its
config file list entries using ast_malloc. List entry allocations
destined for use with Asterisk's linked list API must be ast_calloc()d
or otherwise initialized so that list pointers are set to NULL. These
uses of ast_malloc have been replaced by ast_calloc to prevent
dereferencing of uninitialized pointer values when traversing the list.
(closes issue ASTERISK-22483)
Reported by: Brian Scott
........
Merged revisions 400694 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ensure that when chan_sip binds to the IPv6 any address ([::]), IPv4
candidates are also added.
(closes issue ASTERISK-21917)
Reported by: Torrey Searle
Patches:
0023_ipv6_stun_crash.patch uploaded by Torrey Searle (License 5334)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commit r62462 added two extra fields for logging "the original position the
caller entered the queue at, and the amount of time the caller was waiting in
the queue." But when r75969 was merged from 1.4 into trunk (r75977), these two
fields disappeared. Those two extra fields were not logged in 1.4 and when the
patch was merged, those fields went away.
Therefore, this is a regression and was caught by the reporter because he was
reading the awesome "Asterisk: The Definitive Guide" book.
(closes issue ASTERISK-22197)
Reported by: Dalius M.
Tested by: Dalius M.
Patches:
asterisk-22197-q-log-exitwithkey.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2901/
........
Merged revisions 400622 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r337595, additional security events were added for chan_sip
authentication failures. The new IEs added to the existing invalid
password event were defined as required IEs, but existing users of the
event did not set the new IEs and could not since they didn't apply to
existing uses. They are now marked as optional IEs.
(closes issue ASTERISK-22578)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a bug where the SSRC field on multicast RTP can be stuck at
0 which can cause problems for endpoints trying to make sense of
incoming streams.
(closes issue ASTERISK-22567)
Reported by: Simone Camporeale
Patches:
22567_res_mulitcast_ssrc.patch uploaded by Simone Camporeale (License 6536)
........
Merged revisions 400393 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400394 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The member reg in the peercnt structure is an unsigned char and peercnt_modify()
is expecting an unsigned char argument which gets assigned to peercnt->reg.
This patch fixes that by casting the integer argument being passed to
peercnt_modify to unsigned char.
........
Merged revisions 400314 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RTCP's calculation of the number of lost packets in an RTP stream is based on
that stream's sequence number count, the number of received packets, and how
many packets we expect to receive. When the SSRC for an RTP stream changes,
there can - and almost always will be - a large jump in the next packet's
timestamp and sequence number. If we don't reset the number of received
packets, sequence number count, and other metrics used by RTCP, the next RR/SR
report will use the previous SSRC's values to calculate the lost packet count
for the new SSRC - resulting in a very large number of lost packets.
This patch modifies res_rtp_asterisk such that, if it detects a SSRC change, it
will reset the various values used by the RTCP calculations. From the
perspective of RTCP, this appears as a new media stream - which is what it is.
Review: https://reviewboard.asterisk.org/r/2886/
(closes issue AST-1174)
Reported by: Thomas Arimont
........
Merged revisions 400089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17842, some additional library checks were added to the configure
script so that the bfd library could be found on CentOS and Fedora systems.
As it turns out, openSUSE requires an additional library. This patch adds
another check to the configure script for openSUSE that will add that library.
Review: https://reviewboard.asterisk.org/r/2885/
(closes issue AST-1169)
Reported by: Guenther Kelleter
........
Merged revisions 400073 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives a 200 OK in response to an invite, that peer should have
sent an SDP at some point by then. If the channel has never received an SDP,
media won't have been set and the remote address won't be known. Endpoints in
general should not be doing this. This patch makes it so that Asterisk will
simply hang up a call if it sends a 200 OK at this point. So far this odd
behavior for endpoints has only been observed in tests which involved manually
created SIP transactions in SIPp.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/
........
Merged revisions 399939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PRI and SS7 link control threads are not stopped correctly when the
chan_dahdi.so module is unloaded. The link control threads pri_dchannel()
and ss7_linkset() are not awakened from a poll() to cancel the thread.
* Added a SIGURG signal after requesting the thread cancel to break the
link control thread poll() immediately.
For SS7 it was slightly worse, the link poll() timeout would always be
whatever was the last libss7 scheduled event time used. If no libss7
scheduled event was pending, the thread could run more often than
necessary.
* Set nextms to 60 seconds for the ss7_linkset() poll() if there is no
other libss7 scheduled event.
........
Merged revisions 399818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1st Issue
When a realtime peer sends an un-REGISTER request, Asterisk
un-registers the peer but the database table record still has regseconds and
fullcontact for the peer. This results in calls attempting to be routed to the
peer which is no longer registered. The expected behavior is to get
busy/congested when attempting to call an un-registered peer through the
dialplan.
What was discovered is that we are clearing out the peer's registration in the
database in parse_register_contact() when calling expire_register() but then
upon returning from parse_register_contact(), update_peer() is run which stores
back in the database table regseconds and fullcontact.
2nd Issue
The reporter pointed out that the 200 ok being returned by Asterisk
after un-registering a peer contains a Contact header with ;expires= and the
Expires header is not set to 0. This is actually a regression.
Tests were created for this second issue (ASTERISK-22548). The tests have been
reviewed and a Ship It! was received on those tests.
This patch does the following:
* Do not ignore the Expires header value even when it is set to 0. The patch
sets the pvt->expiry earlier on in the function so that it is set properly and
used.
* If pvt->expiry is 0, do not call update_peer since that means the peer has
already been un-registered and there is no need to update the database record
again since nothing has changed.
(closes issue ASTERISK-22428)
Reported by: Ben Smithurst
Tested by: Ben Smithurst, Michael L. Young
Patches:
asterisk-22428-rt-peer-update-and-expires-header.diff
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2869/
........
Merged revisions 399794 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
