........
r175623 | russell | 2009-02-13 14:23:39 -0600 (Fri, 13 Feb 2009) | 1 line
add missing </para>
........
r175636 | russell | 2009-02-13 14:26:49 -0600 (Fri, 13 Feb 2009) | 1 line
fix a few more XML documentation problems
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
................
r175591 | mmichelson | 2009-02-13 13:49:38 -0600 (Fri, 13 Feb 2009) | 22 lines
Merged revisions 175590 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175590 | mmichelson | 2009-02-13 13:47:48 -0600 (Fri, 13 Feb 2009) | 16 lines
Fix a potential crash situation when using IMAP voicemail
If calling into VoiceMailMain when using IMAP storage, it was
possible to crash Asterisk by hanging up the phone when prompted
for a voicemail mailbox. This patch fixes the issue.
While it may appear that this patch is superficial, it allows code
execution to continue to the failure case just below the IMAP_STORAGE
code block where this patch has been applied
(closes issue #14473)
Reported by: dwpaul
Patches:
voicemail_imap_crash_no_mailbox.patch uploaded by dwpaul (license 689)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r175508 | kpfleming | 2009-02-13 07:35:24 -0600 (Fri, 13 Feb 2009) | 15 lines
Add basic (passthrough, playback, record) support for ITU G.722.1 and G.722.1C (also known as Siren7 and Siren14)
This patch adds passthrough, file recording and file playback support for the codecs listed above, with negotiation over SIP/SDP supported. Due to Asterisk's current limitation of treating a codec/bitrate combination as a unique codec, only G.722.1 at 32 kbps and G.722.1C at 48 kbps are supported.
Along the way, some related work was done:
1) The rtpPayloadType structure definition, used as a return result for an API call in rtp.h, was moved from rtp.c to rtp.h so that the API call was actually usable. The only previous used of the API all was chan_h323.c, which had a duplicate of the structure definition instead of doing it the right way.
2) The hardcoded SDP sample rates for various codecs in chan_sip.c were removed, in favor of storing these sample rates in rtp.c along with the codec definitions there. A new API call was added to allow retrieval of the sample rate for a given codec.
3) Some basic 'a=fmtp' parsing for SDP was added to chan_sip, because chan_sip *must* decline any media streams offered for these codecs that are not at the bitrates that we support (otherwise Bad Things (TM) would result).
Review: http://reviewboard.digium.com/r/158/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r175411 | dhubbard | 2009-02-12 18:13:38 -0600 (Thu, 12 Feb 2009) | 13 lines
Add dynamic fax buffer configuration option to chan_dahdi.conf
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r175344 | dvossel | 2009-02-12 15:27:11 -0600 (Thu, 12 Feb 2009) | 10 lines
Adds force encryption option to iax.conf
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r175298 | jpeeler | 2009-02-12 14:48:56 -0600 (Thu, 12 Feb 2009) | 15 lines
Merged revisions 175294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175294 | jpeeler | 2009-02-12 14:34:36 -0600 (Thu, 12 Feb 2009) | 9 lines
Fix ParkedCall event information for From field in the case of a blind transfer
If the parker information can not be obtained from the peer, try and see if
the BLINDTRANSFER channel variable has been set. Previously, a blind transfer
to the ParkAndAnnounce app would return nothing for the From.
Closes AST-189
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r175188 | jpeeler | 2009-02-12 12:00:11 -0600 (Thu, 12 Feb 2009) | 12 lines
Merged revisions 175187 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175187 | jpeeler | 2009-02-12 11:57:10 -0600 (Thu, 12 Feb 2009) | 6 lines
Fix crash in event of failed attempt to transfer to parking
The peer may not necessarily exist, such as in the case of a transfer to
ParkAndAnnounce. In this case don't try to play a sound to it.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r175125 | russell | 2009-02-12 10:57:25 -0600 (Thu, 12 Feb 2009) | 35 lines
Merged revisions 175124 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175124 | russell | 2009-02-12 10:51:13 -0600 (Thu, 12 Feb 2009) | 27 lines
Don't send DTMF for infinite time if we do not receive an END event.
I thought that this was going to end up being a pretty gnarly fix, but it turns
out that there was actually already a configuration option in rtp.conf,
dtmftimeout, that was intended to handle this situation. However, in between
Asterisk 1.2 and Asterisk 1.4, the code that processed the option got lost.
So, this commit brings it back to life.
The default timeout is 3 seconds. However, it is worth noting that having
this be configurable at all is not really the recommended behavior in RFC 2833.
From Section 3.5 of RFC 2833:
Limiting the time period of extending the tone is necessary
to avoid that a tone "gets stuck". Regardless of the
algorithm used, the tone SHOULD NOT be extended by more than
three packet interarrival times. A slight extension of tone
durations and shortening of pauses is generally harmless.
Three seconds will pretty much _always_ be far more than three packet
interarrival times. However, that behavior is not required, so I'm going to
leave it with our legacy behavior for now.
Code from svn/asterisk/team/russell/issue_14460
(closes issue #14460)
Reported by: moliveras
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r175121 | mmichelson | 2009-02-12 10:28:06 -0600 (Thu, 12 Feb 2009) | 11 lines
Make lock information for ao2_trylock be more useful and gnarly
Core show locks information involving an ao2_trylock did not
show the function that called ao2_trylock, but would instead
show ao2_trylock as the source of the lock. This is not useful
when trying to debug locking issues.
One bizarre note is that this logic is already in 1.4 but somehow
did not get merged to trunk or the 1.6.X branches.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r174948 | mmichelson | 2009-02-11 17:03:08 -0600 (Wed, 11 Feb 2009) | 35 lines
Fix odd "thank you" sound playing behavior in app_queue.c
If someone has configured the queue to play an position or holdtime
announcement, then it is odd and potentially unexpected to hear a
"Thank you for your patience" sound when no position or holdtime
was actually announced.
This fixes the announcement so that the "thanks" sound is only played
in the case that a position or holdtime was actually announced.
There is a way that the "thank you" sound can be played without a
position or holdtime, and that is to set announce-frequency to a value
but keep announce-position and announce-holdtime both turned off.
(closes issue #14227)
Reported by: caspy
Patches:
14227_v3.patch uploaded by putnopvut (license 60)
Tested by: caspy
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174945 | mmichelson | 2009-02-11 16:41:01 -0600 (Wed, 11 Feb 2009) | 29 lines
Fix 'd' option for app_dial and add new option to Answer application
The 'd' option would not work for channel types which use RTP to transport
DTMF digits. The only way to allow for this to work was to answer the channel
if we saw that this option was enabled.
I realized that this may cause issues with CDRs, specifically with giving false
dispositions and answer times. I therefore modified ast_answer to take another
parameter which would tell if the CDR should be marked answered.
I also extended this to the Answer application so that the channel may be answered
but not CDRified if desired.
I also modified app_dictate and app_waitforsilence to only answer the channel if it
is not already up, to help not allow for faulty CDR answer times.
All of these changes are going into Asterisk trunk. For 1.6.0 and 1.6.1, however, all
the changes except for the change to the Answer application will go in since we do
not introduce new features into stable branches
(closes issue #14164)
Reported by: DennisD
Patches:
14164.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/145
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r174844 | file | 2009-02-11 10:44:47 -0400 (Wed, 11 Feb 2009) | 10 lines
Tell the device state core a change happened when a channel is freed but not a specific state.
We need to do this because while we know that the freeing of the channel may cause something to become
not in use we do not know this for sure. There may be another channel that is still up which would cause
it to be in use.
(closes issue #13238)
Reported by: kowalma
Patches:
20090121__bug13238.diff.txt uploaded by Corydon76 (license 14)
Tested by: alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174805 | mmichelson | 2009-02-10 17:17:03 -0600 (Tue, 10 Feb 2009) | 11 lines
Fix potential for stack overflows in app_chanspy.c
When using the 'g' or 'e' options, the stack allocations that
were used could cause a stack overflow if a spyer stayed on the
line long enough without actually successfully spying on anyone.
The problem has been corrected by using static buffers and copying
the contents of the appropriate strings into them instead of using
functions like alloca or ast_strdupa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174764 | mmichelson | 2009-02-10 15:45:14 -0600 (Tue, 10 Feb 2009) | 21 lines
Fix an fd leak that would occur in HTTP AMI sessions
The explanation behind this fix is a bit complicated, and I've already
typed it up in the code as a huge comment inside of manager.c, so I'll
give the abridged version here.
We needed a way to separate action-specific data from session-specific data.
Unfortunately, the only way to maintain API compatibility and to not have to
change every single manager action was to rename the current mansession structure
and wrap it inside a new mansession structure which actually contains action-
specific data.
(closes issue #14364)
Reported by: awk
Patches:
14364_better.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/148/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r174584 | mnicholson | 2009-02-10 12:16:31 -0600 (Tue, 10 Feb 2009) | 25 lines
Merged revisions 174583 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174583 | mnicholson | 2009-02-10 11:52:42 -0600 (Tue, 10 Feb 2009) | 18 lines
Improve behavior of jitterbuffer when maxjitterbuffer is set.
This change improves the way the jitterbuffer handles maxjitterbuffer and
dramatically reduces the number of frames dropped when maxjitterbuffer is
exceeded. In the previous jitterbuffer, when maxjitterbuffer was exceeded, all
new frames were dropped until the jitterbuffer is empty. This change modifies
the code to only drop frames until maxjitterbuffer is no longer exceeded.
Also, previously when maxjitterbuffer was exceeded, dropped frames were not
tracked causing stats for dropped frames to be incorrect, this change also
addresses that problem.
(closes issue #14044)
Patches:
bug14044-1.diff uploaded by mnicholson (license 96)
Tested by: mnicholson
Review: http://reviewboard.digium.com/r/144/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r174580 | file | 2009-02-10 13:48:29 -0400 (Tue, 10 Feb 2009) | 4 lines
Set the type for the peer structure to be a peer as the default.
(closes issue #14447)
Reported by: triccyx
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174581 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174543 | file | 2009-02-10 11:37:07 -0400 (Tue, 10 Feb 2009) | 6 lines
Make the logic for inuse and inringing manipluation match that of 1.4. The old broken logic would reset the values back to 0 during certain scenarios causing the wrong state to be reported.
(closes issue #14399)
Reported by: caspy
(issue #13238)
Reported by: kowalma
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r174301 | mmichelson | 2009-02-09 11:20:55 -0600 (Mon, 09 Feb 2009) | 20 lines
Merged revisions 174282 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174282 | mmichelson | 2009-02-09 11:11:05 -0600 (Mon, 09 Feb 2009) | 12 lines
Don't do an SRV lookup if a port is specified
RFC 3263 says to do A record lookups on a hostname
if a port has been specified, so that's what we're
going to do. See section 4.2.
(closes issue #14419)
Reported by: klaus3000
Patches:
patch_chan_sip_nosrvifport_1.4.23.txt uploaded by klaus3000 (license 65)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r174084 | dhubbard | 2009-02-06 17:51:56 -0600 (Fri, 06 Feb 2009) | 13 lines
Merged revisions 174082 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174082 | dhubbard | 2009-02-06 17:36:03 -0600 (Fri, 06 Feb 2009) | 5 lines
check ast_strlen_zero() before calling ast_strdupa() in sip_uri_headers_cmp()
and sip_uri_params_cmp()
The reporter didn't actually upload a properly-formed patch, instead a
modified chan_sip.c file was uploaded. I created a patch to determine the
changes, then modified the suggested changes to create a proper fix. The
summary above is a complete description of the changes.
(closes issue #13547)
Reported by: tecnoxarxa
Patches:
chan_sip.c.gz uploaded by tecnoxarxa (license 258)
Tested by: tecnoxarxa
........
................
------------------------------------------------------------------------
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r174046 | dvossel | 2009-02-06 14:12:33 -0600 (Fri, 06 Feb 2009) | 12 lines
Adds immediate yes/no option to iax.conf
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r174041 | file | 2009-02-06 15:28:53 -0400 (Fri, 06 Feb 2009) | 4 lines
Don't subscribe to a mailbox on pseudo channels. It is futile. This solves an issue where duplicated pseudo channels would cause a crash because the first one would unsubscribe and the next one would also try to unsubscribe the same subscription.
(closes issue #14322)
Reported by: amessina
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@174042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r173974 | file | 2009-02-06 13:18:35 -0400 (Fri, 06 Feb 2009) | 15 lines
Merged revisions 173967-173968 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173967 | file | 2009-02-06 13:14:15 -0400 (Fri, 06 Feb 2009) | 4 lines
Some clients do not put the call-id for replaces at the beginning, so support it being anywhere in the string.
(closes issue #14350)
Reported by: fhackenberger
........
r173968 | file | 2009-02-06 13:15:01 -0400 (Fri, 06 Feb 2009) | 2 lines
Remove a debug message I put in by accident.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r173902 | file | 2009-02-06 11:59:17 -0400 (Fri, 06 Feb 2009) | 4 lines
Always detach and destroy the whisper and barge audiohooks. Additionally also allow an audiohook to be detached if it has not been attached.
(closes issue #14414)
Reported by: bluecrow76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r173858 | russell | 2009-02-06 04:55:35 -0600 (Fri, 06 Feb 2009) | 13 lines
Add a common implementation of a scheduler context with a dedicated thread.
This commit expands the Asterisk scheduler API to include a common implementation
of a scheduler context being processed by a dedicated thread. chan_iax2 has been
updated to use this new code. Also, as a result, this resolves some race
conditions related to the previous chan_iax2 scheduler handling.
Related to rev 171452 which resolved the same issues in 1.4.
Code from team/russell/sched_thread2
Review: http://reviewboard.digium.com/r/129/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r173848 | russell | 2009-02-06 04:25:09 -0600 (Fri, 06 Feb 2009) | 2 lines
Resolve a memory leak that would occur on an invalid channel given to Action: Status
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r173776 | mmichelson | 2009-02-05 17:48:48 -0600 (Thu, 05 Feb 2009) | 14 lines
Update extensions.conf.sample to be correct.
In trunk, the only necessary change pointed out was that the call
to ChanIsAvail uses an option that has been removed.
For the 1.6.1 branch, however, it appears that the sample file is
badly in need of updating since there are |'s used all over the place
there. My tentative plan is just to copy trunk's sample config file
to those branches since the info there is most up-to-date and should
be correct for use in 1.6.1
Thanks to macli in #asterisk-dev for bringing this up
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r173773 | mmichelson | 2009-02-05 17:28:19 -0600 (Thu, 05 Feb 2009) | 7 lines
Properly set "seen" and "unseen" flags when moving messages from the new to the old folder when using IMAP for voicemail storage
(closes issue #13905)
Reported by: jaroth
Patches:
foldermove_v2.patch uploaded by jaroth (license 50)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r173697 | jpeeler | 2009-02-05 15:00:26 -0600 (Thu, 05 Feb 2009) | 18 lines
Merged revisions 173696 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173696 | jpeeler | 2009-02-05 14:47:51 -0600 (Thu, 05 Feb 2009) | 12 lines
Add new configuration option to make shared IMAP mailboxes function as expected.
The new option is "imapvmshareid" which is an ID to tag multiple mailboxes
using the same IMAP storage location to function as one mailbox. This allows
all messages to be retrieved for any user in the group. The patch alters the
'X-Asterisk-VM-Extension' header that is responsible for matching voicemails
for a given user.
(closes issue #13673)
Reported by: howardwilkinson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r173693 | mmichelson | 2009-02-05 14:30:45 -0600 (Thu, 05 Feb 2009) | 20 lines
Merged revisions 173692 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173692 | mmichelson | 2009-02-05 14:29:09 -0600 (Thu, 05 Feb 2009) | 12 lines
Fix situations where queue members could be autopaused unexpectedly
Specifically, this patch prevents us from autopausing members when
we receive a busy or congestion frame from them.
(closes issue #14376)
Reported by: fiddur
Patches:
14376.patch uploaded by putnopvut (license 60)
Tested by: fiddur
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
