https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r330033 | rmudgett | 2011-07-28 11:26:38 -0500 (Thu, 28 Jul 2011) | 15 lines
Datacalls with B410P fail.
Incoming and outgoing call legs of a data call are using different
formats: a-law, u-law. When the call is bridged, the media stream is run
through translation to convert the media formats. The translation is bad
for data calls.
* Make incoming call that does not explicitly specify u-law or a-law use
the DAHDI channel's default law. The outgoing call always uses the
default law from the DAHDI channel.
(closes issue ABE-2800)
Patches:
jira_abe_2800_companding.patch (license #5621) patch uploaded by rmudgett
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@330050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@329527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make use buffer accessor function in handle_statechange() rather than
directly accessing the struct member.
* Make use less redundant loop construct for iterating over hints.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@329333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two remaining different deadlocks reported dealing with dialplan
hints.
The deadlock in ASTERISK-17666 is caused by invalid locking order in
ast_remove_hint(). The hints container must be locked before the hint
object.
The deadlock in ASTERISK-17760 is caused by a catch-22 situation in
handle_statechange(). The deadlock is caused by not having the conlock
before calling the watcher callbacks. Unfortunately, having that lock
causes a different deadlock as reported in ASTERISK-16961.
* Fixed ast_remove_hint() locking order.
* Made handle_statechange() no longer call the watcher callbacks holding
any locks that matter.
* Made hint ao2 destructor do the watcher callbacks for extension
deactivation to guarantee that they get called.
* Fixed hint reference leak in ast_add_hint() if the callback container
constructor failed.
* Fixed hint reference leak in complete_core_show_hint() for every hint it
found for CLI tab completion.
* Adjusted locking in ast_merge_contexts_and_delete() for safety.
* Added context_merge_lock to prevent ast_merge_contexts_and_delete() and
handle_statechange() from interfering with each other.
* Fixed ast_change_hint() not taking into account that the extension is
used for the hash key.
(closes issue ASTERISK-17666)
Reported by: irroot
Tested by: irroot
JIRA SWP-3318
(closes issue ASTERISK-17760)
Reported by: Byron Clark
Tested by: irroot
JIRA SWP-3393
Review: https://reviewboard.asterisk.org/r/1313/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@329299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PickupChan uses the ampersand as the argument separator.
Was documented as:
PickupChan(channel[,channel2[,...][,options]])
Fixed documentation to:
PickupChan(Technology/Resource[&Technology2/Resource2[&...]][,options])
This is a continuation of ASTERISK-17494 for v1.8 and later.
(closes issue ASTERISK-18144)
Reported by: Erik Smith
Patches:
pickupchan_ducumentation-v2.patch (License #6263) patch uploaded by Erik Smith
Tested by: Erik Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@329199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This appears to be a leftover from when ast_channel was converted to ao2
objects.
Simply removed the extraneous unlock.
(closes issue ASTERISK-17772)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@329144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "pri show channels" command is useful for debuging to see if there are
any stuck B channels.
..........
r307964 | rmudgett | 2011-02-15 15:42:55 -0600 (Tue, 15 Feb 2011) | 9 lines
Add CLI "pri show channels" command.
List the current mapping of DAHDI B channels to Asterisk channel names and
which calls are on hold or call-waiting. Calls on hold or call-waiting
are not associated with any B channel.
JIRA LIBPRI-27
JIRA SWP-2547
..........
r308205 | rmudgett | 2011-02-17 14:21:56 -0600 (Thu, 17 Feb 2011) | 1 line
Add more verbage to CLI command 'pri show channels' usage.
..........
r312579 | rmudgett | 2011-04-04 11:17:58 -0500 (Mon, 04 Apr 2011) | 59 lines
Change also updates 'pri show channels' command with the "chan idle"
column to report if a channel is available for use.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@329012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FreeBSD test fails on this case presumably because there is no eth0 on the test
machine. Better to just remove this test for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The functionality of inband DTMF in chan_sip relied upon
ast_rtp_instance_dtmf_mode_get/set not working properly to avoid calling
ast_rtp_instance_dtmf_begin/end on RTP streams with inband DTMF. According to
documentation, ast_rtp_instance_dtmf_begin/end is meant only for RFC2833 DTMF,
never inband. This fixes the regression introduced in revision 328823.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 299794 attempted to improve the build system to be able to handle
pathnames (primarily DESTDIR) with spaces in them, since this is common on
some platforms (including Mac OSX). Unfortunately, the changes were incomplete
and did not actually provide the desired behavior, and as a side effect the
functionality that ensured that stale headers in the Asterisk 'include' directory
were removed got broken. In addition, the check for stale (and possibly
incompatible) modules in the Asterisk 'modules' directory also got broken, and
would never report any stale modules. Users upgrading to this version or later
versions would then see unexpected module load errors.
Since there are few users who actually want to install Asterisk into paths
that contain spaces, and a proper fix for the build system would take many hours,
the best solution for now is to just revert the partial solution.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328878 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a call to MeetMe includes both the dynamic(D) and always request PIN(P)
options, MeetMe will ask for the PIN two times: once for creating the
conference and once for entering the conference. This behavior was introduced
in rev 311616 when adding the CONFFLAG_ALWAYSPROMPT option to the logic branch
controlling PIN entry for joining a conference.
(closes AST-601)
Review: https://reviewboard.asterisk.org/r/1305/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When starting a call with originate, and having the callee channel run Bridge() on pickup, we will double free the dialed_interface_info datastore, causing a crash. Make sure to check if the datastore still exists before trying to free it.
(closes issue ASTERISK-17917)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ideally, sip_setoption shouldn't be called if there is a lack of a sip private structure. But this will fix a crash.
(closes issue ASTERISK-17909)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases when starting asterisk with -c and hitting control-c to shutdown, there will be an invalid read and null pointer deref causing a crash.
(closes issue ASTERISK-17927)
Reported by: Mark Murawski
Tested by: Mark Murawski, Kinsey Moore, Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- decrease for 1 second registration ttl for very low expirations (some
providers expire few earlier than TTL)
- delete rrq and registration expire timers on URQ received as we make
new registration.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The process_output() function calls ast_str_append() and xml_translate() on its
'out' parameter, which is a pointer to an ast_str buffer. If either of these
functions need to reallocate the ast_str so it will have more space, they will
free the existing buffer and allocate a new one, returning the address of the
new one. However, because process_output only receives a pointer to the ast_str,
not a pointer to its caller's variable holding the pointer, if the original
ast_str is freed, the caller will not know, and will continue to use it (and
later attempt to free it).
(reported by jkroon on #asterisk-dev)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@327950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A bug existed such that if a user entered a password with '*', and the extension 'a' did not exist, an invalid mailbox would be created and the user authenticated. The code was changed to prevent this from occurring, and to prevent users from having mailboxes or passwords defined that begin with the '*' character.
(closes issue ASTERISK-17443)
Reported by: Kevin Scott Adams
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1316/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@327852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem with using 'echo -n' is that it is not portable. While BSD systems
required that the '-n' option be removed and interpreted, System V required
that all strings should be echoed with no interpretation of options. This
fundamental difference of behavior means that it is never possible to use the
'-n' flag to echo in tests which are meant to be portable.
In this case, on Mac OS X 10.6, the /bin/sh shell builtin 'echo' uses the
System V semantics of the command, and thus the SHELL test failed on that
platform.
http://pubs.opengroup.org/onlinepubs/009695399/utilities/echo.html#tag_04_41_16
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@327793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk sends a 403 Forbidden response if authentication fails for an
INVITE as required. However, it ignores the ACK and keeps retransmitting
the response.
* Made not delete the to-tag in the dialog so the expected ACK can be
matched with the dialog and stop the retransmissions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@327211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible for a dialplan backend to not modify the given buffer or ast_str
and still return success. This causes any previous value stored in the buffer
to be used as if the new function call provided it. Some functions also append
to the given buffer assuming it is empty.
The test_substitution unit test has also been modified to detect this problem.
(closes issue ASTERISK-17878)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@327106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
