(these memleaks stop development of gk codes, now i can continue)
Fix printHandler 'Unbalanced Structure' issues with locking printHandler
data for single thread.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original REGISTERTRYING flag, in addition to being impossible to
check, also encroached on the space for the flag above it. This
patch moves the flags that were below REGISTERTRYING back to where
they were as though we had just removed the REGISTERTRYING option.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option is not only useless, but has been broken since inception since
the flag was never copied from the peer where it is set to the pvt where
it was checked. RFC 3261 specificially states that you should not send a
provisional response to a non-INVITE request, and if we did fix the code
so that it worked, it would cause the same kind of user enumeration
vulnerability that we've discussed with the nat= setting. This patch
removes registertrying option and any code that would have sent a 100
response to a register.
Review: https://reviewboard.asterisk.org/r/1562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changeset r342927 introduced a warning which was only supposed to be
emitted when a found realtime peer had an empty (or no) name. It turned
out that there were some inconsistencies left. Now found peers with an
empty name are explicitly ignored like before r342927 but better.
Reviewed by: Stefan Schmidts, Terry Wilson
Review: https://reviewboard.asterisk.org/r/1560
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Integers should always be aligned. For some platforms (ARM, SPARC) this
is more important than for others. This changeset ensures that the
string field string lengths are aligned on *all* platforms, not just on
the SPARC for which there was a workaround. It also fixes that the
length integer can be resized to 32 bits without problems if needed.
(closes issue ASTERISK-17310)
Reported by: radael, S Adrian
Reviewed by: Tzafrir Cohen, Terry Wilson
Tested by: S Adrian
Review: https://reviewboard.asterisk.org/r/1549
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In queues.conf.sample the leastrecent strategy was incorrectly described. Now updated
to reflect how the strategy actually checks peers.
(closes issue ASTERISK-17854)
Reported by: Sebastian Denz
Patches:
queues.conf-doc_issue.patch (License #6139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343047 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The MeetMe application documentation has some comments about usage of DAHDI,
and they were a bit outdated relative to modern DAHDI releases. This patch
changes the comment to just tell the user that a functional DAHDI timing
source is required, and no longer mention 'dahdi_dummy', since that module
does not exist in current DAHDI releases.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems with the dynamic realtime peer/user lookup
code. The lookup logic had become rather hard to read due to lots of
incremental changes to the realtime_peer function. And, during the
addition of the sipregs functionality, several possibilities for memory
leaks had been introduced. The insecure=port matching has always been
broken for anyone using the sipregs family. And, related, the broken
implementation forced those using sipregs to *still* have an ipaddr
column on their sippeers table.
Thanks Terry Wilson for comprehensive testing and finding and fixing
unexpected behaviour from the multientry realtime call which caused
the realtime_peer to have a completely unused code path.
This changeset fixes the leaks, the lookup inconsistenties and that
you won't need an ipaddr column on your sippeers table anymore (when
you're using sipregs). Beware that when you're using sipregs, peers
with insecure=port will now start matching!
(closes issue ASTERISK-17792)
(closes issue ASTERISK-18356)
Reported by: marcelloceschia, Walter Doekes
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1395
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Somewhere between 1.4 and 1.8 the sipusers family has become completely
unused. Before that, the sipfriends family had been obsoleted in favor
of separate sipusers and sippeers families. Apparently, they have been
merged back again into a single family which is now called "sippeers".
Reviewed by: irroot, oej, pabelanger
Review: https://reviewboard.asterisk.org/r/1523
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an extension is removed from a context, its entry in the pattern match
tree is not deleted. Instead, the extension is marked as deleted. When an
extension is removed and re-added, if that extension is also a prefix of
another extension, several log messages would report an error and did not
check whether or not the extension was deleted before accessing the memory.
Additionally, if the extension was already in the tree but previously
deleted, and the pattern was at the end of a match, the findonly flag was
not honored and the extension would be erroneously undeleted.
Additionaly, it was discovered that an IAX2 peer could be unregistered
via the CLI, while at the same time it could be scheduled for unregistration
by Asterisk. The unregistration method now checks to see if the peer
was already unregistered before continuing with an unregistration.
(closes issue ASTERISK-18135)
Reported by: Jaco Kroon, Henry Fernandes, Kristijan Vrban
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1526
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_LIST_INSERT_BEFORE_CURRENT() could not be used twice in an iteration
or before AST_LIST_REMOVE_CURRENT() without corrupting the list.
AST_LIST_INSERT_BEFORE_CURRENT() could also corrupt the list if
AST_LIST_INSERT_BEFORE_CURRENT() or AST_LIST_REMOVE_CURRENT() is used on
the next iteration.
* Fixed cut and paste error using the wrong variable in
AST_LIST_INSERT_BEFORE_CURRENT().
* Added linked list unit tests for AST_LIST_INSERT_BEFORE_CURRENT(),
AST_LIST_APPEND_LIST(), and AST_LIST_INSERT_LIST_AFTER().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sequence number was handled as an unsigned integer (usually 32 bits I think, more
depending on the architecture) and was put into the rtp packet which is basically
just a bunch of bits using an or operation. Sequence number only has 16 bits
allocated to it in an RTP packet anyway, so it would add to the next field which
just happened to be the codec. This makes sure the sequence number is set to be
a 16 bit integer regardless of architecture (hopefully) and also makes it so the
incrementing of the sequence number does bitwise or at the peak of a 16 bit number
so that the value will be set back to 0 when going beyond 65535 anyway.
(closes issue ASTERISK-18291)
Reported by: Will Schick
Review: https://reviewboard.asterisk.org/r/1542/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "No D-channels available! Using Primary channel as D-channel anyway!"
WARNING message has been confusing on non-NFAS setups. The message refers
to things that are NFAS specific.
* Changed the warning to several different warnings to be more accurate
for the situation and less confusing as a result:
"No D-channels up! Switching selected D-channel from X to Y.",
"No D-channels up!", and
"D-channel is down!".
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Despite an ominous sounding comment stating that membercount was for "logged
in" members only and thus we couldn't use ao2_container_count(), I could not
find a single place in the code where that seemed to be accurate. The only time
we decremented membercount was when we were marking something dead or actually
removing it. The only places we incremented it were either after ao2_link(), or
trying to correct for having set it to 0 during a reload. In every case where
we were correcting the value, it seemed that we were trying to make the count
actually match what ao2_container_count() would return. The only place I could
find where we made a determination about something being "logged in" or not, we
didn't trust the membercount, but instead looked at devicestate, paused, etc.
This patch removes membercount, replaces its use with ao2_container_count, and
manually adds the results of ao2_container_count to a "membercount" field for
ast_data queue query results. This patch also would fix AST-676, but as it is
slightly riskier than the previously committed fix, the two commits have been
made separately.
Reivew: https://reviewboard.asterisk.org/r/1541/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One of the changes in the recent spool handling of hardlinks patch was just
outside a HAVE_INOTIFY block and caused compilation to fail in some build
environments. This has been corrected.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342328 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes the inotify code to handle call files being hardlinked into the
spool directory.
The smsq utility does this, instead of rename(), to ensure that it cannot
accidentally overwrite an existing spool file. A rename() might do that, but
link() will definitely not.
The inotify code had broken this, because it would wait for an IN_CLOSE_WRITE
event on the file... which was never forthcoming, since it was never opened.
Now we look for IN_OPEN events following the IN_CREATE event, and only wait
for an IN_CLOSE_WRITE if the file was actually opened.
Patch-by: dwmw2
(closes issue ASTERISK-18331)
Review: https://reviewboard.asterisk.org/r/1391/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This behavior matches up more closely with the way invite/register/etc are handled.
This patch also modifies some adjacent code for code style compliance. Pretty minor.
(closes issue ASTERISK-17616)
Reported by: Jeremy Kister
Patches:
chan_sip.c-options-fromuser-fix-v1.patch uploaded by Jeremy Kister (license #6232)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@342061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for ASTERISK-12715 and ASTERISK-12685 added a check for the Park
application because the channel needed to be masqueraded to prevent a
crash. Since the Park application now always masquerades the channel into
the parking lot, the special check is no longer needed. The fix also
resulted in AGI exec Park attempting to double park the call and not honor
the Park application parameters.
* Removed no longer necessary call to ast_masq_park_call() by AGI exec for
the Park application. (Reverts -r146923)
* Fix Park application to only return 0 or -1. The AGI exec Park was
causing broken pipe error messages because the Park application returned 1
on successful park.
(closes issue ASTERISK-18737)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code was originally copied from the is_int() function in the AEL
code. wdoekes pointed out that the function should take a const char*
and that their was an unneeded variable. This is now fixed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Google has recently make some changes (again) to their protocol. Rather then
patching asterisk to flip between the two different methods, we now allow both.
Lets hope this keeps Google Voice happy for a while.
(closes issue ASTERISK-18714)
Reported by: Iordan Iordanov
Patches:
chan_gtalk.patch uploaded by Iordan Iordanov (licenses 6311)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a SIP dial string contains a numeric hostname that is not a peer name,
don't try to resolve it as it is unlikely that someone really means
Dial(SIP/0.0.4.26) when Dial(SIP/1050) is called. Also, make sure that
create_addr returns -1 if an address isn't resolved so that we don't
attempt to send SIP requests to an address that doesn't resolve.
(closes issue ASTERISK-17146, ASTERISK-17716)
Review: https://reviewboard.asterisk.org/r/1532/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix potential deadlocks in SIP and IAX blind transfer to parking.
* Fix SIP, IAX, DAHDI analog, and MGCP channel drivers to respect the
parkext_exclusive option with transfers (Park(,,,,,exclusive_lot)
parameter). Created ast_park_call_exten() and ast_masq_park_call_exten()
to maintian API compatibility.
* Made masq_park_call() handle a failed ast_channel_masquerade() setup.
* Reduced excessive struct parkeduser.peername[] size.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If parse_uri was called with an empty URI, some pointers would be
modified and an invalid read could result. This patch avoids calling
parse_uri with an empty contact uri when parsing REGISTER requests.
AST-2011-012
(closes issue ASTERISK-18668)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
whether modules are embedded or not; using just the bare category name led to
accidentally enabling these options when users used the wrong "--enable"
operation on the menuselect command line.
Now the internal option names are prefixed with "EMBED_", so they won't be
the same as the name of the category containing the modules they control
the embedding of.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RTCP is now disabled for "inactive" RTP audio streams during SIP T.38 sessions.
The ability to disable RTCP streams in res_rtp_asterisk was missing, so this
code was added to support the bug fix.
(closes issue ASTERISK-18400)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@340970 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add AST_CONTROL_UPDATE_RTP_PEER frame to be ignored here to avoid
displaying a WARNING message.
(closes issue ASTERISK-18610)
Patch by: Kristijan_Vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@340878 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Party A calls Party B.
Party A DTMF blind transfers Party B to Party C.
Party A channel continues to execute dialplan.
* Fixed the return value of builtin_blindtransfer() to return the correct
value after a transfer so the dialplan will not keep executing.
* Removed unnecessary connected line update that did not really do
anything.
* Made access to GOTO_ON_BLINDXFR thread safe in check_goto_on_transfer().
* Fixed leak of xferchan for failure cases in check_goto_on_transfer().
* Updated debug messages in builtin_blindtransfer() and
check_goto_on_transfer().
(closes issue ASTERISK-18275)
Reported by: rmudgett
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@340809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
