Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to decline individual image streams over
unsupported transports in the SDP of the 200 response. Previously,
an image stream offer with RTP/AVP as the transport would cause
chan_sip to respond with a 488.
(closes issue ASTERISK-22988)
Reported by: adomjan
Original patch by: adomjan
........
Merged revisions 406170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This restricts direct usage of global oseq so that all accesses are
locked and threads are not racing to get oseq values that they did not
claim.
This also fixes a build error in res_pktccops under dev mode.
(closes issue ASTERISK-23100)
Reported by: adomjan
Patch by: adomjan
........
Merged revisions 406037 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-12117, an improvement to insure consistant local from tags
on outbound registrations resulted in an undesirable behavior - caused
by leftover unexpired sip_pvt dialogs (with the previous cseq number),
resulting in many uncessary REGISTER requests. Instead of significant
rework of transmit_register(), this change deletes the dialogs after a
200 OK response indiciating a successful registration, keeping the old
dialogs from interfering with normal operation.
(closes issue ASTERISK-22946)
Reported by: Stephan Eisvogel
Review: https://reviewboard.asterisk.org/r/3109/
........
Merged revisions 405433 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When performing a SIP transfer to a Park extension, if the Park fails, chan_sip
will currently not hang up either the transferer or the transfer target. This
results in the channels being orphaned with no thread to service frames,
resulting in stuck channels.
This patch immediately hangs up the two channels if a Park fails.
(closes issue ASTERISK-22834)
Reported by: rsw686
Tested by: rsw686
(closes issue ASTERISK-23047)
Reported by: Tommy Thompson
Tested by: Tommy Thomspon
Review: https://reviewboard.asterisk.org/r/3107
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dahdi show channels output slices the callerid (which is dnid copied over on
PRI channels). If the channel naming structures look like:
'DAHDI/i1/1408409XXXX-6'
then the output slices 1408409XXXX down to 1408409XXX. This patch just opens
it up to 15 chars so you can see the whole thing.
(closes issue ASTERISK-22918)
Reported by: outtolunc
Patches:
svn_chan_dahdi.c.format12_15.diff.txt uploaded by outtolunc (license 5198)
........
Merged revisions 404784 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@404785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk will sometimes core dump during caller id read on analog
channels due to a negative return value from the read() in
my_get_callerid that slips through as a negative length argument to
callerid_feed() if the errno returned by DAHDI is ELAST. This change
ensures that the negative return is treated properly even when it is
ELAST.
(closes issue ASTERISK-22746)
Reported by: Michael Walton
Patches:
chan_dahdi_cid_crash_fix.r401410.patch uploaded by Michael Walton (License 6502)
........
Merged revisions 402708 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For outbound register requests the tag on the From line was
updated every 20 seconds prior to a successful registration
and also once for each registration renewal. That behavior
can possibly cause the registration to be denied because of
the different tag, and is not aligned with the intention of
RFC 3261 8.1.3.5 "... request constitutes a new transaction
and SHOULD have the same value of the Call-ID, To, and From
of the previous request...". This updates chan_sip to have
a field to keep the local tag in the registration structure
and use that tag for registration requests where the callid
is also unchanged.
(closes issue ASTERISK-12117)
Reported by: Pawel Pierscionek
Review: https://reviewboard.asterisk.org/r/2988/
........
Merged revisions 402604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The presentation indicator in a callerid (e.g. set by dialplan function
Set(CALLERID(name-pres)= ...)) is not checked when SIP Dialog Info Notifies
are generated during extension monitoring. Added a check to make sure the
name and/or number presentations on the callee (remote identity) are set to
allow. If they are restricted then "anonymous" is used instead.
(closes issue AST-1175)
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2976/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects one-way audio between Asterisk and Chrome/jssip as a
result of Asterisk inserting the incorrect RTCP port into RTCP SRFLX
ICE candidates. This also exposes an ICE component enumeration to
extract further details from candidates.
(closes issue ASTERISK-21383)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/2967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at ASTERISK-22236, Walter Doekes pointed out that when running
"sip show peers", the setting being displayed can be confusing. The display of
"N" used to mean NAT (i.e. yes). The NAT setting has gone through many
different changes resulting in the display of different characters to try and
convey what the current setting is for 'Forcerport' (A for Auto and Forcerport
is currently on, a for Auto but Forcerport is off, Y for yes, and N for no).
During the initial code review to try and clarify these settings (especially
since "N" no longer meant what it used to mean in prior versions of Asterisk),
Mark Michelson suggested using the full space available to display the settings
which helped to make the settings very clear. That was a great suggestion.
Therefore, this patch does the following:
* The column for 'Forcerport' now will show: Auto (Yes), Auto (No), Yes, or No.
* A column for the 'Comedia' setting has been added. It too will display the
setting in a non-cryptic way: Auto (Yes), Auto (No), Yes, or No.
* UPGRADE.txt has been updated to document this change.
(closes issue ASTERISK-22728)
Reported by: Walter Doekes
Tested by: Michael L. Young
Patches:
asterisk-forcerport-display-clarification_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2941
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adapts the behaviour of avpf to only impact the format of outgoing calls. For
inbound calls, both AVP and AVPF calls will be accepted regardless of the value
of avpf in the configuration.
(closes issue ASTERISK-22005)
Reported by: Torrey Searle
Patches:
optional_avpf_trunk.patch uploaded by tsearle (license 5334)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401704 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If preferred codecs included any non-audio format the code would
mistakenly add the audio format, even if it was not a joint capability
with the remote side.
(closes issue ASTERISK-21131)
Reported by: nbougues
Patches:
patch_unsupported_codec_1.8.patch uploaded by nbougues (license 6470)
........
Merged revisions 401497 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transferring an analog call using flashhooks generated an unable to get
index WARNING message when the transfer is completed.
* Removed unnecessary analog subchannel shell games when transferring a
call using flashhooks.
Thanks to Tzafrir Cohen for mentioning this in a comment on issue
ASTERISK-22720.
........
Merged revisions 401378 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When trying to determine if a peer is behind NAT, we should not be using the
ports when comparing addresses.
This patch removes the port from being checked and just useds the addresses
now.
(closes issue ASTERISK-22729)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-remove-using-port-for-nat-check.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2927/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remember the swgain setting from CLI "dahdi set swgain" command so the
CLI "dahdi show channel" output will reflect the current setting.
* Updated CLI "dahdi set hwgain" and "dahdi set swgain" documentation.
(issue ASTERISK-22429)
Reported by: Jaco Kroon
Patches:
jira_asterisk_22429_v1.8_v2.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 400907 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bumping the SDP version number can cause interoperability problems
since receivers of the responses will expect that a 200 SDP will
be identical to a previous 183 SDP.
(closes issue ASTERISK-21204)
reported by NITESH BANSAL
Patches:
dont-increment-session-version-in-2xx-after-183.patch uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 400906 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The member reg in the peercnt structure is an unsigned char and peercnt_modify()
is expecting an unsigned char argument which gets assigned to peercnt->reg.
This patch fixes that by casting the integer argument being passed to
peercnt_modify to unsigned char.
........
Merged revisions 400314 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives a 200 OK in response to an invite, that peer should have
sent an SDP at some point by then. If the channel has never received an SDP,
media won't have been set and the remote address won't be known. Endpoints in
general should not be doing this. This patch makes it so that Asterisk will
simply hang up a call if it sends a 200 OK at this point. So far this odd
behavior for endpoints has only been observed in tests which involved manually
created SIP transactions in SIPp.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/
........
Merged revisions 399939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PRI and SS7 link control threads are not stopped correctly when the
chan_dahdi.so module is unloaded. The link control threads pri_dchannel()
and ss7_linkset() are not awakened from a poll() to cancel the thread.
* Added a SIGURG signal after requesting the thread cancel to break the
link control thread poll() immediately.
For SS7 it was slightly worse, the link poll() timeout would always be
whatever was the last libss7 scheduled event time used. If no libss7
scheduled event was pending, the thread could run more often than
necessary.
* Set nextms to 60 seconds for the ss7_linkset() poll() if there is no
other libss7 scheduled event.
........
Merged revisions 399818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1st Issue
When a realtime peer sends an un-REGISTER request, Asterisk
un-registers the peer but the database table record still has regseconds and
fullcontact for the peer. This results in calls attempting to be routed to the
peer which is no longer registered. The expected behavior is to get
busy/congested when attempting to call an un-registered peer through the
dialplan.
What was discovered is that we are clearing out the peer's registration in the
database in parse_register_contact() when calling expire_register() but then
upon returning from parse_register_contact(), update_peer() is run which stores
back in the database table regseconds and fullcontact.
2nd Issue
The reporter pointed out that the 200 ok being returned by Asterisk
after un-registering a peer contains a Contact header with ;expires= and the
Expires header is not set to 0. This is actually a regression.
Tests were created for this second issue (ASTERISK-22548). The tests have been
reviewed and a Ship It! was received on those tests.
This patch does the following:
* Do not ignore the Expires header value even when it is set to 0. The patch
sets the pvt->expiry earlier on in the function so that it is set properly and
used.
* If pvt->expiry is 0, do not call update_peer since that means the peer has
already been un-registered and there is no need to update the database record
again since nothing has changed.
(closes issue ASTERISK-22428)
Reported by: Ben Smithurst
Tested by: Ben Smithurst, Michael L. Young
Patches:
asterisk-22428-rt-peer-update-and-expires-header.diff
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2869/
........
Merged revisions 399794 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Asterisk would incorrectly use the previous endpoint
addresses in SDP in spite of providing its own port. T38 is never meant to
be done through directmedia and Asterisk should always be in the media path
for these streams.
(closes issue ASTERISK-17273)
Reported by: Kevin Stewart
(closes issue ASTERISK-18706)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2853/
........
Merged revisions 399456 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a new IAX2 client registers, the astdb database is updated with the
value of minregexpire defined in iax.conf instead of using the expiry time
that is provided by the client. The provided expiry time of the client is
updated after inserting the astdb entry. As a consequence, restarting or
reloading asterisk creates clients whose registration may expire before
they reregister. The clients are therefore unavailable after minregexpire
seconds until they reregister.
* Move updating of the expiry time to before inserting into the astdb.
(closes issue ASTERISK-22504)
Reported by: Stefan Wachtler
Patches:
chan_iax2.c.patch (license #6533) patch uploaded by Stefan Wachtler
........
Merged revisions 399158 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If we receive a 200 OK without SDP, we will now check to see if
the remote address has been established for that channel's RTP
session and if the to tag for that channel has changed from
the most recent to tag in a response less than 200.
If either a change has been made since the last to-tag was
received or the remote address is unset, then we will drop
the call.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/diff/#index_header
........
Merged revisions 398835 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes the things in chan_h323 that were missed or ignored in the
great channel opaquification and gets chan_h323 back into a compiling
state.
(closes issue ASTERISK-22365)
Reported by: Dmitry Melekhov
Patches:
chan_h323.patch uploaded by Dmitry Melekhov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix stray reference to idle_list in cleanup_thread_list(). This may be
the reason for the note in iax2_process_thread() about threads not being
removed from the task lists.
* Move cleanup_thread_list(&idle_list) to after the other lists are
cleaned up.
........
Merged revisions 398416 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix bridgecallno deadlock avoidance. When doing deadlock avoidance, you
need to retest the status of values for each loop to see if you still need
the lock for bridgecallno.
* As a safety check, after acquiring the bridgecallno lock you should
check if iaxs[bridgecallno] is NULL just like the current callno checks.
* Move setting thread->iostate to IAX_IOSTATE_IDLE to after processing any
deferred frames to ensure that the iostate is IDLE when it is placed back
into the idle list. defer_full_frame() tries to ensure
iax2_process_thread() wakes up to process the frame.
........
Merged revisions 398379 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix the misdn debug output to remote consoles. chan_misdn uses
ast_console_puts() which doesn't know about verbose levels. Better to use
ast_verbose() instead. Without this patch the misdn debug messages are
appended to the verbose level which ever was set by the message sent to
the console before, i.e. any undefined level.
(closes issue AST-1218)
Reported by: Guenther Kelleter
Patches:
misdnlog.patch (license #6372) patch uploaded by Guenther Kelleter
........
Merged revisions 398235 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
