Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2798/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the SIP channel driver processes an invalid SDP that defines media
descriptions before connection information, it may attempt to reference
the socket address information even though that information has not yet
been set. This will cause a crash.
This patch adds checks when handling the various media descriptions that
ensures the media descriptions are handled only if we have connection
information suitable for that media.
Thanks to Walter Doekes, OSSO B.V., for reporting, testing, and providing
the solution to this problem.
(closes issue ASTERISK-22007)
Reported by: wdoekes
Tested by: wdoekes
patches:
issueA22007_sdp_without_c_death.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397756 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397757 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A remote exploitable crash vulnerability exists in the SIP channel driver if an
ACK with SDP is received after the channel has been terminated. The handling
code incorrectly assumed that the channel would always be present.
This patch adds a check such that the SDP will only be parsed and applied if
Asterisk has a channel present that is associated with the dialog.
Note that the patch being applied was modified only slightly from the patch
provided by Walter Doekes of OSSO B.V.
(closes issue ASTERISK-21064)
Reported by: Colin Cuthbertson
Tested by: wdoekes, Colin Cutherbertson
patches:
issueA21064_fix.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397710 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397711 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a From header on an outbound out-of-call SIP MESSAGE were
malformed, the result could crash Asterisk.
In addition, if a From header on an incoming out-of-call SIP
MESSAGE request were malformed, the message was happily accepted
rather than being rejected up front. The incoming message path
would not result in a crash, but the behavior was bad nonetheless.
(closes issue ASTERISK-22185)
reported by Zhang Lei
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In 1.8, r384779 introduced a regression by retrieving an old dialog and keeping
the old recv address since recv was already set. This has caused a problem when
a proxy is involved since responses to incoming requests from the proxy server,
after an outbound call is established, are never sent to the correct recv
address.
In 11, r382322 introduced this regression.
The fix is to revert that change and always store the recv address on incoming
requests.
Thank you Walter Doekes for helping to point out this error and Mark Michelson
for your input/review of the fix.
(closes issue ASTERISK-22071)
Reported by: Alex Zarubin
Tested by: Alex Zarubin, Karsten Wemheuer
Patches:
asterisk-22071-store-recvd-address.diff by Michael L. Young (license 5026)
........
Merged revisions 397204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a peer is used in a register line and TLS is defined as the transport, the
registration fails since the transport on the dialog is never set properly
resulting in UDP being used instead of TLS.
This patch sets the dialog's transport based on the transport that was defined
in the register line. If the register line does not specify a transport, the
parsing function for the register line always defaults back to UDP.
(closes issue ASTERISK-21964)
Reported by: Doug Bailey
Tested by: Doug Bailey
Patches:
asterisk-21964-set-reg-dialog-transport.diff
by Michael L. Young (license 5026)
........
Merged revisions 396240 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@396248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
from mixing different variants or general MFC-R2 settings within the same E1 line.
Most users do not have a problem with this since MFC-R2 lines are usually fractional E1s, or
the whole E1 has the same country variant and R2 settings.
In Venezuela however is common to have inbound MFC-R2 and outbound DTMF-R2 within the same E1.
This fix now properly parses the chan_dahdi.conf file to generate a new openr2 context every
time a new channel => section is found and the configuration was changed.
(closes issue ASTERISK-21117)
Reported by: Rafael Angulo
Related Elastix issue: http://bugs.elastix.org/view.php?id=1612
........
Merged revisions 394106 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@394173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the following memory leaks:
* http.c: The structure containing the addresses to bind to was not being
deallocated when no longer used
* named_acl.c: The global configuration information was not disposed of
* config_options.c: An invalid read was occurring for certain option types.
* res_calendar.c: The loaded calendars on module unload were not being
properly disposed of.
* chan_motif.c: The format capabilities needed to be disposed of on module
unload. In addition, this now specifies the default options for the
maxpayloads and maxicecandidates in such a way that it doesn't cause the
invalid read in config_options.c to occur.
(issue ASTERISK-21906)
Reported by: John Hardin
patches:
http.patch uploaded by jhardin (license 6512)
named_acl.patch uploaded by jhardin (license 6512)
config_options.patch uploaded by jhardin (license 6512)
res_calendar.patch uploaded by jhardin (license 6512)
chan_motif.patch uploaded by jhardin (license 6512)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@392810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1). When touching the bridgecallno, we need to lock it.
2). stop_stuff() which calls iax2_destroy_helper()
Assumes the lock on the pvt is already held, when iax2_destroy_helper() is called.
Thus we need to lock the bridgecallno pvt before we call stop_stuff(iaxs[fr->callno]->bridgecallno);
3). When evaluating the state of 'callno->transferring' of the current leg,
we can't change it to READY unless the bridgecallno is locked.
Why, if we are interrupted by the other call leg before 'transferring = TRANSFER_RELEASED',
the interrupt will find that it is READY and that the bridgecallno is also READY so Releases the legs.
(closes issue ASTERISK-21409)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2594/
........
Merged revisions 391062 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@391063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The prior code committed, r385473, failed to take into consideration that not
all outgoing calls will be to a peer. My fault.
This patch does the following:
* Check if there is a related peer involved. If there is, check and set NAT
settings according to the peer's settings.
* Fix a problem with realtime peers. If the global setting has auto_force_rport
set and we issued a "sip reload" while a peer is still registered, the peer's
flags for NAT are reset to off. When this happens, we were always setting the
contact address of the peer to that of the full contact info that we had.
(closes issue ASTERISK-21374)
Reported by: jmls
Tested by: Michael L. Young
Patches:
asterisk-21374-fix-crash-and-rt-peers.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2524/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@388601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC6665 4.2.2: ... after a failed State NOTIFY transaction remove the subscription
The problem is that the State Notify requests rely on the 200OK reponse for pacing control
and to not confuse the notify susbsystem.
The issue is, the pendinginvite isn't cleared if a response isn't received,
thus further notify's are never sent.
The solution, follow RFC 6665 4.2.2's 'SHOULD' and remove the subscription after failure.
(closes issue ASTERISK-21677)
Reported by: Dan Martens
Tested by: Dan Martens, David Brillert, alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2475/
........
Merged revisions 387875 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@387880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 10
if the side not performing refreshes does not receive a
session refresh request before the session expiration, it SHOULD send
a BYE to terminate the session, slightly before the session
expiration. The minimum of 32 seconds and one third of the session
interval is RECOMMENDED.
Prior to this asterisk would refresh at 1/2 the Session-Expires interval,
or if the remote device was the refresher, asterisk would timeout at interval end.
Now, when not refresher, timeout as per RFC noted above.
(closes issue ASTERISK-21742)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2488/
........
Merged revisions 387344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@387345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 7.2
"UACs MUST be prepared to receive a Session-Expires header field in a
response, even if none were present in the request."
What changed
After ASTERISK-20787, inbound calls to asterisk with no Session-Expires in the INVITE are now are offered
a Session-Expires (1800 asterisk default) in the response, with asterisk as the refresher.
Symptom:
After 900 seconds (asterisk default refresher period 1800), asterisk RE-INVITEs the device, the device
may respond with a much lower Session-Expires (180 in our case) value that it is now using.
Asterisk ignores this response, as it's deemed both an INBOUND CALL, and a RE-INVITE.
After 180 seconds the device times out and sends BYE (hangs up), asterisk is still working with the
refresher period of 1800 as it ignored the 'Session Expires: 180' in the previous 200OK response.
Fix:
handle_response_invite() when 200OK, remove check for outbound and reinvite.
(closes issue ASTERISK-21664)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2463/
........
Merged revisions 387312 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@387319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When you have lots of SIP peers (according to the issue reporter, around 3500),
the 'sip show peers' CLI command or AMI action can crash due to a poorly placed
string duplication that occurs on the stack. This patch refactors the command
to not allocate the string on the stack, and handles the formatting of a single
peer in a separate function call.
(closes issue ASTERISK-21466)
Reported by: Guillaume Knispel
patches:
fix_sip_show_peers_stack_overflow_asterisk_11.3.0-v2.patch uploaded by gknispel (License 6492)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@387134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a read error in snd_pcm_readi would still be treated as a
nominal result when constructing a voice frame from the expected data. Since
the value returned is negative, as opposed to the number of samples read,
this could result in a crash. With this patch, we now return a null frame
when a read error is detected.
Note that the patch on ASTERISK-21329 was modified slightly for this commit,
in that we bail immediately on detecting the read error, rather than bypassing
the construction of the voice frame.
(closes issue ASTERISK-21329)
Reported by: Keiichiro Kawasaki
patches:
chan_alsa.diff uploaded by kawasaki (License 6489)
........
Merged revisions 385633 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@385634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we reload Asterisk or chan_sip, the flags force_rport and comedia that are
turned on and off when using the auto_force_rport and auto_comedia nat settings
go back to the default setting off. These flags are turned on when needed or
off when not needed at the time that a peer registers, re-registers or initiates
a call. This would apply even when only the default global setting
"nat=auto_force_rport" is being used, which in this case would only affect the
force_rport flag.
Everything is good except for the following: The nat setting is set to
auto_force_rport and auto_comedia. We reload Asterisk and the peer's
registration has not expired. We load in the settings for the peer which turns
force_rport and comedia back to off. Since the peer has not re-registered or
placed a call yet, those flags remain off. We then initiate a call to the peer
from the PBX. The force_rport and comedia flags stay off. If NAT is involved,
we end up with one-way audio since we never checked to see if the peer is behind
NAT or not.
This patch does the following:
* Moves the checking of whether a peer is behind NAT into its own function
* Create a function to set the peer's NAT flags if they are using the auto_* NAT
settings
* Adds calls in sip_request_call() to these new functions in order to setup the
dialog according to the peer's settings
(closes issue ASTERISK-21374)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-21374-auto-nat-outgoing-fix_v2.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2421/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@385473 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On startup, it's possible for a frame to arrive before the processing threads were ready.
In iax2_process_thread() the first pass through falls into ast_cond_wait, should a frame arrive
before we are at ast_cond_wait, the signal will be ignored.
The result iax2_process_thread stays at ast_cond_wait forever, with deferred frames being queued.
Fix: When creating initial idle iax2_process_threads, wait for init_cond to be signalled
after each thread is started.
(issue ASTERISK-18827)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2427/
........
Merged revisions 385402 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@385403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a BYE request is processed in chan_sip, the current SIP dialog is detached
from its associated Asterisk channel structure. The tech_pvt pointer in the
channel object is set to NULL, and the dialog persists for an RFC mandated
period of time to handle re-transmits.
While this process occurs, the channel is locked (which is good).
Unfortunately, operations that are initiated externally have no way of knowing
that the channel they've just obtained (which is still valid) and that they are
attempting to lock is about to have its tech_pvt pointer removed. By the time
they obtain the channel lock and call the channel technology callback, the
tech_pvt is NULL.
This patch adds a few checks to some channel callbacks that make sure the
tech_pvt isn't NULL before using it. Prime offenders were the DTMF digit
callbacks, which would crash if AMI initiated a DTMF on the channel at the
same time as a BYE was received from the UA. This patch also adds checks on
sip_transfer (as AMI can also cause a callback into this function), as well
as sip_indicate (as lots of things can queue an indication onto a channel).
Review: https://reviewboard.asterisk.org/r/2434/
(closes issue ASTERISK-20225)
Reported by: Jeff Hoppe
........
Merged revisions 385170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@385173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
This issue is also present in Asterisk 1.8 and a separate patch will be applied
to it.
(issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_v4.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2385/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@384827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_proceeding option causes Asterisk to assume inband audio
may be present when a PROCEEDING message is received.
Q.931 Section 5.1.2 says the network cannot assume that the CPE side has
attached to the B channel at this time without explicitly sending the
progress indicator ie informing the CPE side to attach to the B channel
for audio. However, some non-compliant ISDN switches send a PROCEEDING
without the progress indicator ie indicating inband audio is available and
assume that the CPE device has connected the media path for listening to
ringback and other messages.
ASTERISK-17834 which causes this issue was dealing with a non-compliant
network switch.
(closes issue ASTERISK-21151)
Reported by: Gianluca Merlo
Tested by: rmudgett
........
Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@384689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When authenticating a SIP request with alwaysauthreject enabled, allowguest
disabled, and autocreatepeer disabled, Asterisk discloses whether a user
exists for INVITE, SUBSCRIBE, and REGISTER transactions in multiple ways. The
information is disclosed when:
* A "407 Proxy Authentication Required" response is sent instead of a
"401 Unauthorized" response
* The presence or absence of additional tags occurs at the end of "403
Forbidden" (such as "(Bad Auth)")
* A "401 Unauthorized" response is sent instead of "403 Forbidden" response
after a retransmission
* Retransmission are sent when a matching peer did not exist, but not when a
matching peer did exist.
This patch resolves these various vectors by ensuring that the responses sent
in all scenarios is the same, regardless of the presence of a matching peer.
This issue was reported by Walter Doekes, OSSO B.V. A substantial portion of
the testing and the solution to this problem was done by Walter as well - a
huge thanks to his tireless efforts in finding all the ways in which this
setting didn't work, providing automated tests, and working with Kinsey on
getting this fixed.
(closes issue ASTERISK-21013)
Reported by: wdoekes
Tested by: wdoekes, kmoore
patches:
AST-2013-003-1.8 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-10 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-11 uploaded by kmoore, wdoekes (License 6273, 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@384003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r373424, several reentrancy problems in chan_sip were addressed. As a
result, the SIP channel driver is now properly locking the channel driver
private information in certain operations that it wasn't previously. This
exposed two latent problems either in register_verify or by functions called
by register_verify. This includes:
* Holding the private lock while calling sip_send_mwi_to_peer. This can create
a new sip_pvt via sip_alloc, which will obtain the channel container lock.
This is a locking inversion, as any channel related lock must be obtained
prior to obtaining the SIP channel technology private lock.
Note that this issue was already fixed in Asterisk 11.
* Holding the private lock while calling sip_poke_peer. In the same vein as
sip_send_mwi_to_peer, sip_poke_peer can create a new SIP private, causing
the same locking inversion.
Note that this locking inversion typically occured when CLI commands were run
while a SIP REGISTER request was being processed, as many CLI commands (such
as 'sip show channels', 'core show channels', etc.) have to obtain the channel
container lock.
(issue ASTERISK-21068)
Reported by: Nicolas Bouliane
(issue ASTERISK-20550)
Reported by: David Brillert
(issue ASTERISK-21314)
Reported by: Badalian Vyacheslav
(issue ASTERISK-21296)
Reported by: Gabriel Birke
........
Merged revisions 383863 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@383878 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CALLEDTON channel variable is set for incoming ISDN calls to the lower
7 bits of the Q.931 type-of-number/numbering-plan octet. The
CALLERID(dnid-num-plan) should have the same value.
(closes issue ASTERISK-21248)
Reported by: rmudgett
........
Merged revisions 383796 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@383798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/
Reported-by: John Bigelow
Patch-by: Kinsey Moore
(closes issue AST-1093)
........
Merged revisions 383165 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@383166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a session timer expires during a dialog that has re-negotiated to T.38
and Asterisk is the refresher, Asterisk will send a re-INVITE with an SDP
containing audio media only. This causes some hilarity with the poor fax
session under weigh.
This patch corrects that by sending T.38 parameters if we are in the middle of
a T.38 session.
(closes issue ASTERISK-21232)
Reported by: Nitesh Bansal
patches:
dont-send-audio-reinvite-for-sess-timer-in-t38-call.patch uploaded by nbansal (License 6418)
........
Merged revisions 383124 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@383125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17888, the AMI Registry event during SIP registrations was supposed
to include the Username field. Somehow, one of the events was missed. This
patch corrects that - the Username field should be included in all AMI Registry
events involving SIP registrations.
(issue ASTERISK-17888)
(closes issue ASTERISK-21201)
Reported by: Dmitriy Serov
patches:
chan_sip.c.diff uploaded by Dmitriy Serov (license 6479)
........
Merged revisions 382847 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, certain conditions for sending the message would
result in an address of '(null)' being used in the via header of the
SIP message because a NULl value of pvt->ourip was used when initially
generating the via header. This is fixed by adding a call to build_via
when the address is set before sending the message.
(closes issue ASTERISK-21148)
Reported by: Zhi Cheng
Patches:
700-sip_msg_send_via_fix.patch uploaded by Zhi Cheng (license 6475)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382739 65c4cc65-6c06-0410-ace0-fbb531ad65f3
