Replaced a stray echo that should've been a message call in
safe_asterisk. I'm using the contents of the old message inside the
if $NOTIFY so peoples log parsing scripts won't get confused by new
messages. I'll clean that up in trunk.
(Note that a 'make install' still won't overwrite your old safe_asterisk
if it exists. See ASTERISK-21965.)
ASTERISK-23492 #close
........
Merged revisions 415521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleans up the safe_asterisk script and adds the ASTSAFE_FOREGROUND
option that allows the debian asterisk init script to capture the
right pid.
* Drop the vim #modeline which wasn't used. Use test consistently
without the odd configure xno syntax. Double quote all paths.
General cleanup.
* Don't output message()s to the console but only to TTY if set.
* Allow TTY to be "no" as well as empty (debian compatibility with
debian/patches/safe_asterisk-config).
* Add option to export ASTSAFE_FOREGROUND=1 from the init script
that calls this to disable backgrounding. Debian uses a similar
method in debian/patches/safe_asterisk-nobg).
ASTERISK-23492 #close
Review: https://reviewboard.asterisk.org/r/3574/
........
Merged revisions 415132 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk didn't support the dynamic payload change in rtp mapping in the 200
OK response.
Scenario:
Asterisk sends the INVITE proposing alaw and telephone-event, it proposes
rtpmap:101 for telephone-event. Peer responds with 2xx, it answers with
alaw and telephone-event also, but it proposes a different rtpmap number
(rtpmap:103) for telephone-event.
Expected Behaviour:
Asterisk should honour the rtpmapping in the response and send DTMF packets
using 103 as payload type for DTMF.
Actual Behaviour: Asterisk sends DTMF packets using payload type 101.
With this patch asterisk now supports changes that can occur in the rtp mapping
in the response.
(closes issue ASTERISK-23279)
Reported by: NITESH BANSAL
Review: https://reviewboard.asterisk.org/r/3225/
Patches:
dynamic_payload_change.patch uploaded by nbansal (license 6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the realtime SQL scripts with an entry that will create the
queue_log table. This brings the PostgreSQL scripts inline with the MySQL
scripts, with respect to what tables they will create.
(closes issue ASTERISK-21021)
Reported by: Eugene
patches:
queue_log.sql uploaded by varnav (license 6360)
........
Merged revisions 394896 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@394897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit updates some fields in the contributed realtime schema files to
handle IPv6 addresses.
(closes issue ASTERISK-21173)
Reported by: Torrey Searle
Patches:
realtime_sql.patch Torrey Searle (license 5334)
asterisk-21173-update-ip-fields.diff Michael L. Young (license 5026)
........
Merged revisions 382939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
All voicemails now have a 'msg_id' included in their metadata. The ODBC
message storage backend now requires this column; as such, the MySQL contrib
script that creates the voicemail_data table has been updated with the appropriate
column information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
contrib/scripts/live_ast currently assumes that it is being run from the
top-level directory of the source tree. It creates a script that will
also set the working directory.
This fix avoids the need to set the working directory if the caller sets
LIVE_AST_BASE_DIR instead.
It relies on realpath for that. If realpath is not available, it will
fall back to the original behaviour.
Review: https://reviewboard.asterisk.org/r/2027/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actually remove res_ais. This commit removes it.
In addition, the 'install_prereq' script has been updated to no longer install
AIS dependency packages, and instead install Corosync packages instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be empty, don't check for it, instead of check if LD_LIBRARY_PATH is
already set and if so, append LIVE_AST_LD_PATH_EXTRA properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r350788 | kpfleming | 2012-01-14 09:22:33 -0600 (Sat, 14 Jan 2012) | 8 lines
Ensure that two prerequisites are properly installed on Debian-style distributions.
* Don't specify a specific version of libgmime; newer versions are available
now and acceptable.
* Install libsrtp so that res_srtp can be built.
........
r350789 | kpfleming | 2012-01-14 09:23:32 -0600 (Sat, 14 Jan 2012) | 3 lines
Correct some 'set-but-not-used' variable warnings.
........
Merged revisions 350788-350789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350790 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r350127 | rmudgett | 2012-01-09 12:40:33 -0600 (Mon, 09 Jan 2012) | 12 lines
Update contrib script live_ast to invoke Asterisk with valgrind and suppression file.
* Added valgrind_compare script to compare two valgrind log files for
differences.
(issue ASTERISK-17339)
Reported by: Tzafrir Cohen
Patches:
valgrind_compare (license #5035) script uploaded by Tzafrir Cohen
live_ast_valgrind.diff (license #5035) patch uploaded by Tzafrir Cohen
live_ast_valgrind_v2.diff (license #5185) patch uploaded by Paul Belanger
........
r350128 | rmudgett | 2012-01-09 12:54:56 -0600 (Mon, 09 Jan 2012) | 11 lines
live_ast: valgrind: run asterisk under valgrind
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
Merged revisions 326636 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 350127-350128 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350129 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added information collection from the output of the utilities: top, free, uptime, ifconfig
Added information collection from the output of the Asterisk command 'dahdi show status'
Added option / flag '-n, --non-interactive'
Updated man page to reflect new option / flag '-n, --non-interactive'
Patch-by: John Bigelow (itzanger)
(closes issue AST-749)
........
Merged revisions 349504 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349505 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
environment variables and also enables a custom run directory for asterisk
(instead of defaulting to /tmp).
Patch by: Byron Clark (byronclark)
(closes ASTERISK-17810)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds two new menu features to app_confbridge, admin_toggle_menu_
participants and participant_count. The admin action will globally mute /
unmute all non-admin participants on a converence, while the participant
count simply exposes the existing participant count function to the
conference bridge menu.
This also adds configuration options to change the sound played when the
conference is globally muted / unmuted, as well as the necessary config
hooks to place these functions in the DTMF menus.
(closes issue ASTERISK-18204)
Reported by: Kevin Reeves
Tested by: Matt Jordan
Patches:
app_confbridge.c.patch.txt, conf_config_parser.c.patch.txt,
confbridge.h.patch.txt uploaded by Kevin Reeves (license 6281)
Review: https://reviewboard.asterisk.org/r/1518/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option is not only useless, but has been broken since inception since
the flag was never copied from the peer where it is set to the pvt where
it was checked. RFC 3261 specificially states that you should not send a
provisional response to a non-INVITE request, and if we did fix the code
so that it worked, it would cause the same kind of user enumeration
vulnerability that we've discussed with the nat= setting. This patch
removes registertrying option and any code that would have sent a 100
response to a register.
Review: https://reviewboard.asterisk.org/r/1562/
........
Merged revisions 343220 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 343221 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337115 | lmadsen | 2011-09-20 17:18:25 -0500 (Tue, 20 Sep 2011) | 7 lines
Update RedHat Init script to work with Heartbeat.
The current RedHat init script was not LSB compatible. This change will make it LSB compatible so that
it can work correctly with Heartbeat.
(Closes issue ASTERISK-18253)
Reported by: c0rnoTa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This permits the list of codecs to be specified in one configuration line,
instead of two or more, generally with the aim of either allowing all codecs
with the exception of a few or disallowing most but permitting a few.
Review: https://reviewboard.asterisk.org/r/1411/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
