res_hep_pjsip.so and res_hep_rtcp.so will still load and do a lot of
unnecessary work even if 'enabled' is set to 'no' in hep.conf.
Change-Id: I3eddfeea09c6b5bc7c641952ee0ae487fd09b64b
Reset the samples counter to zero when we are done playing an
announcement so that we don't skip into the middle of the first file in
the playlist.
Also add the selected annoucement to the output of 'moh show classes.'
ASTERISK-24329 #close
Reported by: Thomas Frederiksen
Change-Id: I2a5f986a31279c981592f49391409ebf38d6f6d0
This no longer appears to exist, so no sense in causing confusion.
ASTERISK-27175 #close
Reported by: Tzafrir Cohen
Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100
Added links to the wiki to replace references to outdated
tex docs.
ASTERISK-27430
Reported by: Corey Farrell
Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209
When the RTCP code was transitioned over to Stasis a code change
was made to keep track of how many reports are present. This count
controlled where report blocks were placed in the RTCP report.
If a compound RTCP packet was received this logic would incorrectly
place a report block in the wrong location resulting in a write
to an invalid location.
This change removes this counting logic and always places the report
block at the first position. If in the future multiple reports are
supported the logic can be extended but for now keeping a count
serves no purpose.
ASTERISK-27382
ASTERISK-27429
Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116
When we fail over to a new target we create a new transaction
and it becomes the current INVITE transaction. This does not
prevent the previous transaction from raising state changes
and causing the session to be prematurely disconnected if a
transport error occurs immediately.
This change backports a fix from PJSIP that eliminates the
incorrect state change and reduces when they would be raised
in the first place.
ASTERISK-27408
Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
Stripping the DNID in a SIP dial string can result in attempting to call
the argument parsing macros on an empty string, causing a crash.
ASTERISK-26131 #close
Reported by: Dwayne Hubbard
Patches:
dw-asterisk-master-dnid-crash.patch (license #6257) patch
uploaded by Dwayne Hubbard
Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e
Recently menuselect has randomly produced an error stating that
configure was just run and make had to be restarted. I believe this is
due to an incorrect menuselect/Makefile rule. The original rule
produced an error if makeopts or autoconfig.h were older than
makeopts.in or autoconfig.h.in. I believe this can create an issue if
makeopts is older than autoconfig.h.in or if autoconfig.h is older than
makeopts.in. The new rules compare files independently.
Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
Support for these protocols was added in the same commit as the 'proto'
field, so we can safely use the same ./configure check.
For reference: https://trac.pjsip.org/repos/changeset/4968
Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
Use the new ast_cli_completion_add() function to improve completion
performance for commands like 'pjsip show endpoint.'
Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.
This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.
Related to ASTERISK~26806, but does not completely resolve it.
Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
Optimize resource_name_match. This change eliminates use of
ast_strdupa, instead verifying that both basename's are the same length,
then using strncasecmp.
Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and
res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for
dependent modules.
Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3
For both dynamic and static contacts it was possible that potential AOR
changes were not being applied to all contacts. This was because the qualify
and schedule code was only retrieving AOR's, and contacts with frequencies
greater than zero.
For instance the following could happen: and AOR/contact has a frequency of 5,
it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are
stopped, a list of AOR's is retrieved with frequency > 0, but none are
selected since in this scenario all are 0. The contact for the one previously
set to 5 though does not get updated, so it's status remains "AVAILABLE".
This patch makes it so all contacts (static and dynamic) are selected, and
appropriately updated if need be.
ASTERISK-27467 #close
Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
Dynamic contacts were not being properly updated on reload. As a matter of
fact any changes to the AOR that a dynamic contact was associated with were
not being applied.
On reload, this patch makes it so for each dynamic contact, the associated
AOR is now retrieved and the AOR's fields are applied to the contact.
ASTERISK-27467
Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
