This patch fixes EXITWITHTIMEOUT queue_log entry to always come with 3
parameters: position, original position and waiting time.
ASTERISK-25038 #close
Reported by: Etienne Lessard
Change-Id: I0c62045922e26bee2125e93aee1dee17eee79618
A recent change went into Asterisk which added reference counts to the
channels stored in a dial masquerade datastore. Unfortunately this
included a reference to the caller in a dialing operation. While all
of the dialed targets have the datastore removed from them upon dialing
completion this did not occur for the caller, causing it to have a
reference to itself that could go never go away (as it depended on
the destruction of the datastore which only happened when the channel
was destroyed). This resulted in the caller channel remaining on the
system despite it having hung up.
This change does the following to fix this issue:
1. The dial masquerade datastore is now removed from the caller upon
dialing completion, just like the dialed targets.
2. Upon destruction of the caller all the dialed targets are also
removed from the dial masquerade datastore (just in case).
3. The reference to the caller has been removed as it should not be
possible for the datastore to now be valid/useful after the lifetime
of the caller has ended.
ASTERISK-25025 #close
Change-Id: I1ef4ca5ca04980028604cc2af5d2992ac3431b3f
Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
does replace not insert. The few users of AST_VECTOR_INSERT were
refactored. Because these are macros, there should be no ABI
compatibility issues.
Added AST_VECTOR_INSERT_AT that actually inserts an element into the
vector at a specific index pushing existing elements to the right.
Added AST_VECTOR_GET_CMP that can retrieve from the vector based
on a user-provided compare function.
Added AST_VECTOR_CALLBACK function that will execute a function
for each element in the vector. Similar to ao2_callback and
ao2_callback_data functions although the vector callback can take
a variable number of arguments. This should allow easy migration
to a vector where a container might be too heavy.
Added read/write locked vector and lock manipulation macros.
Added unit tests.
ASTERISK-25045 #close
Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0
This adds a test that will fail if any test failed to register. Also fail
if any test registration produced a warning about missing a leading or
trailing slash.
ASTERISK-25053 #close
Reported by: Corey Farrell
Change-Id: I93e50b8fcbcfa7f1f5b41b2c44a51685c09529c3
Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be re-established before the negative connection cache
time is met.
ASTERISK-22708 #close
Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
Format interfaces cannot be unregistered, so the modules that provide them
need to be held open except by shutdown.
ASTERISK-25054 #close
Reported by: Corey Farrell
Change-Id: Iadbd9675bf0d30b8fded5a739b163db3ea2db8f3
The upgrade script for auto DTMF mode (31cd4f4891ec) added in 88b0fa7755
failed to add ENUM support for Postgres databases. This requires a
specific import from the sqlalchemy.dialects.postgresql package. This
patch corrects this error, which allows for Postgres update scripts to
be generated.
ASTERISK-24706
Change-Id: I4742ac8efa533cd6f18e0bdd907b339a9aedf015
When using the force black background command-line option or configuration
option an invalid reset sequence is sent following a coloured output item
in the CLI, the result is that the colour is not 'turned off' and continues
until the next non-default coloured text output.
A reset sequence is already defined in term.c, but the ast_term_reset
function doesn't use it, instead building it's own invalid sequence and
returning that.
This patch changes that behaviour, removing the building of a reset sequence
and instead using the pre-built constant 'enddata' which is a suitable reset
sequence for this purpose.
ASTERISK-24896 #close
Reported by: Dan Tucny
Change-Id: I56323899123ae3264900389cae1f5b252aa3bf43
A few cases exist where headers of optional_api provders are included but
not needed. This causes unneeded calls to ast_optional_api_use.
* Don't include optional_api.h from sip_api.h.
* Move 'struct ast_channel_monitor' to channel.h.
* Don't include monitor.h from chan_sip.c, channel.c or features.c.
The move of struct ast_channel_monitor is needed since channel.c depends on
it. This has no effect on users of monitor.h since channel.h is included
from monitor.h.
ASTERISK-25051 #close
Reported by: Corey Farrell
Change-Id: I53ea65a9fc9693c89f8bcfd6120649bfcfbc3478
Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options.
This extra space prevented any of the dependencies from being seen by
menuselect, so building with default options would fail if PJSIP was
not installed.
This also makes the tool that extracts information for menuselect
tolerant of multiple spaces in the future.
ASTERISK-25033 #close
Reported by: Peter Whisker
Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698
* Add AST_DEVMODE to BUILDOPTS
* Remove CFLAGS that do not effect ABI from BUILDOPTS.
* Use BUILDOPTS to generate AST_BUILDOPT_SUM.
* Remove loop that defined AST_MODULE_*
These changes ensure that only ABI effecting options are considered for
AST_BUILDOPT_SUM. This also reduces unneeded full system rebuilds caused
by enabling or disabling one module that another is dependent on.
ASTERISK-25028
Reported by: Corey Farrell
Change-Id: I2c516d93df9f6aaa09ae079a8168c887a6ff93a2
This ensures that refdebug is initialized before AO2_DEBUG if
both are enabled, since AO2_DEBUG allocates a container.
This change also makes AO2_DEBUG initialization critical, a
failure will abort Asterisk startup. This is needed since
the failure would be caused by reg_containers allocation
failure, and that would result in a segmentation fault by
ao2_container_register later in startup.
ASTERISK-25048 #close
Reported by: Corey Farrell
Change-Id: I9a243ea3fc5653b48b931ba6d61971cb2e530244
The PBX core maintains two hash tables for hints: a container of the
actual hints (hints), along with a container of devices that are watching that
hint (hintdevices). When a dialplan reload occurs, each hint in the hints
container is destroyed; this requires a lookup in the container of devices to
find the device => hint mapping object. In the current code, this performs an
ao2_callback, iterating over each of the device to hint objects in the
hintdevices container. For a large number of hints, this is extremely
expensive: dialplan reloads with 20000 hints could take several minutes
in just this phase.
This patch improves the performance of this step in the dialplan reloads
by caching which devices are watching a hint on the hint object itself.
Since we don't want to create a circular reference, we just cache the
name of the device. This allows us to perform a smarter ao2_callback on
the hintdevices container during hint removal, hashing on the name of the
device and returning an iterator to the matching names. The overall
performance improvement is rather large, taking this step down to a number of
seconds as opposed to minutes.
In addition, this patch also registers the hint containers in the PBX
core with the astobj2 library. This allows for reasonable debugging to
hash collisions in those containers.
ASTERISK-25040 #close
Reported by: Matt Jordan
Change-Id: Iedfc97a69d21070c50fca42275d7b3e714e59360
The sample pjsip.conf has a few comment lines that are missing the
semicolons at the start of the comment, causing the config to fail
load.
Change-Id: I776a38c916a7df7ee3e072fd0b21dbf4cc457352
Scenario:
Alice calls Bob. Bob performs a blond transfer to Carol. Carol rejects
the incoming call (or some other immediate circumstance causes Carol not
to answer the call)
What occurs in this case is that when the bridge between Alice and Bob
breaks, Alice is told to masquerade into Bob's channel that had placed
the call to Carol. The actual masquerade goes down without a hitch.
However, a channel fixup callback that attempts to publish dial events
over Stasis has a crash. The reason for this crash is that the datastore
on Bob's channel that placed the outbound call to Carol only had a bare
pointer to Carol's channel. Since Carol rejected the incoming call,
Carol's channel has been hung up and freed, meaning accessing her
channel results in a crash.
The fix here is simple. The dial fixup code has been altered to hold
references to the involved channels and to drop those references when
freeing data.
ASTERISK-25025 #close
Reported by Chet Stevens
Change-Id: I54eedda207b8ec7a69263353b43abe5746aea197
The Asterisk 13 version of the fix for outbound registration was missing
a key component that set the outbound authenticator's callback that
creates an authenticated request based on an old request. This was
picked up by some outbound registration tests failing in the testsuite.
Change-Id: I5ca9379698c606da36bc38eaffccedaf64211ce3
The res_ari_device_states module depends on res_stasis_device_state,
not res_stasis_device_states.
Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de
Some telco switches occasionally ignore ISDN RESTART requests. The fix
for ASTERISK-19608 added an escape clause for B channels in the restarting
state if the telco ignores a RESTART request. If the telco fails to
acknowledge the RESTART then Asterisk will assume the telco acknowledged
the RESTART on the second call attempt requesting the B channel by the
telco. The escape clause is good for dealing with RESTART requests in
general but it does cause the next call for the restarting B channel to be
rejected if the telco insists the call must go on that B channel.
chan_dahdi doesn't really need to issue a RESTART request in response to
receiving a cause 44 (Requested channel not available) code. Sending the
RESTART in such a situation is not required (nor prohibited) by the
standards. I think chan_dahdi does this for historical reasons to deal
with buggy peers to get channels unstuck in a similar fashion as the
chan_dahdi.conf resetinterval option.
* Add the chan_dahdi.conf force_restart_unavailable_chans compatability
option that when disabled will prevent chan_dahdi from trying to RESTART
the channel in response to a cause 44 code.
ASTERISK-25034 #close
Reported by: Richard Mudgett
Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65
This patch adds a new option to cdr.conf, 'newcdrcolumns', that will handle CDR
columns added in Asterisk 1.8. The columns are:
* peeraccount
* linkedid
* sequence
When enabled, the columns in the database entry will be populated with the data
from the CDR.
ASTERISK-24976 #close
Change-Id: I51a57063f4ae5e194a9d933a8df45dc8a4534f0b
When the PJSIP pjsip_regc_send function is invoked and an error
status returned the caller currently decrements the reference count
of the client state that it just incremented, assuming the
registration callback would not have been invoked. In practice
this is not correct. If the failure happens after the transaction
has been set up the callback will still be invoked. This will
cause the reference count to be incorrectly decremented twice, once
by the registration callback and second by the caller of
pjsip_regc_send.
This change makes it so that whether the callback is invoked or
not is known by the caller of pjsip_regc_send. Depending on
this it can know whether it is responsible for decrementing the
reference count of the client state or not.
ASTERISK-25037 #close
Reported by: Joshua Colp
Change-Id: I749dc12f3a22115c49c5d7d95ff42a5fa45319de
Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which
checks compiler requirements for RAII:
gcc: -fnested-functions support
clang: -fblocks (and if required -lBlocksRuntime)
The original check was implemented in configure.ac and now has it's
own file. This function also sets C_COMPILER_FAMILY to either gcc or
clang for use by makefile
Created autoconf/ast_check_strsep_array_bounds.m4 (contains
AST_CHECK_STRSEP_ARRAY_BOUNDS):
which checks if clang is able to handle the optimized strsep & strcmp
functions (linux). If not, the standard libc implementation should be
used instead. Clang + the optimized macro's work with:
strsep(char *, char []), but not with strsepo(char *, char *).
Instead of replacing all the occurences throughout the source code,
not using the optimized macro version seemed easier
See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h':
llvm-comment: Normally, this array-bounds warning are suppressed for
macros, so that unused paths like the one that accesses __s1[3] are
not warned about. But if you preprocess manually, and feed the
result to another instance of clang, it will warn about all the
possible forks of this particular if statement. Instead of switching
of this optimization, another solution would be to run the preproces-
sing step with -frewrite-includes, which should preserve enough
information so that clang should still be able to suppress the diag-
nostic at the compile step later on.
See also "https://llvm.org/bugs/show_bug.cgi?id=20144"
See also "https://llvm.org/bugs/show_bug.cgi?id=11536"
Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning
suppressions:
-Wno-unused-value
-Wno-parentheses-equality
In an earlier review (reviewboard: 4550 and 4554), they were deemed a
nuisace and less than benefitial.
configure.ac:
Added AST_CHECK_RAII() see earlier
Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier
Removed moved content
ASTERISK-24917
Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb
The patch in 0b6410c4f8 did correctly fix a memory leak of the DTLS
structures in the RTP engine. However, when a 'core reload' is issued, a
double free of the memory pointed to by the char *'s in the DTLS
configuration struct can occur, as ast_rtp_dtls_cfg_free does not set
the pointers to NULL when they are freed.
This patch sets those pointers to NULL, preventing a second call to
ast_rtp_dtls_cfg_free from corrupting memory.
ASTERISK-25022
Change-Id: I820471e6070a37e3c26f760118c86770e12f6115
A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.
One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.
Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.
ASTERISK-24955 #close
Reported by: Matt Jordan
Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733
Sections Exist in pjsip.conf
This patch modifies the current loading strategy of the pjsip configuration. If
duplicate sections (e.g. sections containing the same [id/type]) are defined in
[pjsip.conf], the loader will consider the configuration for the given type as
invalid when the duplicate section is encountered. The entire configuration
(including what was previously loaded) for the duplicate [id/type] sections
will be rejected and destroyed, an error message is logged and the load
processing for the given stops.
ASTERISK-24996
Reported By: Ashley Sanders
Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef
Virtual line support establishes a relationship between messages
related to an outbound registration and a local endpoint. This is
accomplished by attaching a parameter to the Contact of the outbound
registration and looking for it on any received requests. If the
parameter exists and can be matched to an outbound registration
the configured endpoint is associated with the request.
ASTERISK-24949 #close
Reported by: Joshua Colp
Change-Id: I7df909d2625479110a83fdd354c21ac539e8615d
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
Create the directory './doc/rest-api' at the start of 'make ari-stubs'
to prevent an error when documentation is generated. The directory is
also added to git ignores.
ASTERISK-25027
Reported by: Corey Farrell
Change-Id: Iaccc7f0138501c23aa78feaca2f3cce9e68cbc1b
