Previously, only the "data" field of the sip_pkt created during __sip_reliable_xmit
was freed when XMIT_ERROR was returned by __sip_xmit. When retrans_pkt was called,
this inevitably resulted in the reading and writing of freed memory.
XMIT_ERROR is a condition meaning that we don't want to attempt resending the packet
at all. The proper action to take is to remove the scheduler entry we just created,
free the packet's data as well as the packet itself, and unlink it from the list of
packets on the sip_pvt structure.
(closes issue #14455)
Reported by: Nick_Lewis
Patches:
14455.patch uploaded by mmichelson (license 60)
Tested by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Special thanks goes to DEA who had to redo this patch twice
because we first put unload/load support in and later redid the way
we configure devices and lines.
(closes issue #10297)
Reported by: DEA
Patches:
skinny-reload-trunkv2.diff uploaded by wedhorn (license 30)
skinny-reload-trunk-v4.txt uploaded by DEA (license 3)
With mods by me based on feedback from wedhorn and Russell and seanbright
Tested by: DEA, mvanbaak, pj
Review: http://reviewboard.digium.com/r/130/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r178838 | dvossel | 2009-02-26 11:24:02 -0600 (Thu, 26 Feb 2009) | 9 lines
IAX2 prune realtime fix
Now prune_users() and prune_peers() are called instead of reload_config() to prune all users/peers that are realtime. These functions remove all users/peers with the rtfriend and delme flags set. iax2_prune_realtime() also lacked the code to properly delete a single friend. For example. if iax2 prune realtime <friend> was called, only the peer instance would be removed. The user would still remain.
(closes issue #14479)
Reported by: mousepad99
Review: http://reviewboard.digium.com/r/176/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178804 | murf | 2009-02-26 10:09:03 -0700 (Thu, 26 Feb 2009) | 28 lines
This patch prevents the feature detection timeout from being cut in half.
Because the ast_channel_bridge() call will return 0 and pass
a frame pointer for both DTMF_BEGIN and DTMF_END, the feature_timer
field in hte config struct is getting decremented twice, which
effectively cuts the digittimeout in half. I added conditions
to the if statement to only let DTMF_END frames to flow thru,
which solved the problem. Also, when the frame pointer is null,
let control flow thru-- this usually happens on timeouts. I added
a comment to the code to explain what's going on and why.
Many thanks to sodom for reporting this problem. Personnally, it always seemed
like something was wrong with the featuredigittimeout, but I never
could quite decide what... and was too busy to investigate.
This bug forced the issue, and now we know.
Sodom had other issues in 14515, but I couldn't reproduce them. If
he still has problems, and wants to get them solved, he is welcome
to reopen 14515.
(closes issue #14515)
Reported by: sodom
Patches:
14515.patch uploaded by murf (license 17)
Tested by: murf, sodom
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Iax2 prune realtime had issues. If "iax2 prune realtime all" was called, it would appear like the command was successful, but in reality nothing happened. This is because the reload that was supposed to take place checks the config files, sees no changes, and does nothing. If there had been a change in the the config file, the realtime users would have been marked for deletion and everything would have been fine. Now prune_users() and prune_peers() are called instead of reload_config() to prune all users/peers that are realtime. These functions remove all users/peers with the rtfriend and delme flags set. iax2_prune_realtime() also lacked the code to properly delete a single friend. For example. if iax2 prune realtime <friend> was called, only the peer instance would be removed. The user would still remain.
(closes issue #14479)
Reported by: mousepad99
Review: http://reviewboard.digium.com/r/176/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r178640 | murf | 2009-02-25 14:00:50 -0700 (Wed, 25 Feb 2009) | 17 lines
This patch completes the fixes nec. to make 1.4 asterisk dialplan expressions ($[...]) 8-bit transparent
While I was updating ast_expr2.fl, I missed one rule that would allow 8-bit chars to be caught
in tokens; and in so doing, it absorbs the ${ sequence and messes up the
checking of raw exprs by AEL.
Trunk already has these changes.
(closes issue #14543)
Reported by: klaus3000
Patches:
patch.14543 uploaded by murf (license 17)
Tested by: murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178641 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, add some documentation supporting the use of astcanary.
(closes issue #14538)
Reported by: KNK
Patches:
asterisk-1.6.x-astcanary.diff uploaded by KNK (license 545)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Manager command "iaxpeers" now shows if a link is trunked and encrypted. Instead of encryption saying simply "yes" or "no", it now displays what type of encryption is enabled and if keyrotation is on or not.
(closes issue #14427)
Reported by: snuffy
Patches:
iax_show_trunks.diff uploaded by snuffy (license 35)
2009022200_iax2_show_trunkencryption.diff.txt uploaded by mvanbaak (license 7)
Tested by: mvanbaak, dvossel, snuffy
Review: http://reviewboard.digium.com/r/173/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178205 | file | 2009-02-24 11:16:07 -0400 (Tue, 24 Feb 2009) | 9 lines
Skip check for extension when subscribing for MWI.
Since the remote side is not actually subscribing to a specific extension when
subscribing for MWI just skip the check to see if the extension exists. They can't use it
to specify the mailbox either since we require configuration of that in sip.conf
(closes issue #14531)
Reported by: festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178141 | russell | 2009-02-23 17:09:01 -0600 (Mon, 23 Feb 2009) | 14 lines
Fix infinite DTMF when a BEGIN is received without an END.
This commit is related to rev 175124 of 1.4 where a previous attempt was made
to fix this problem. The problem with the previous patch was that the inserted
code needed to go _before_ setting the lastrxts to the current timestamp.
Because those were the same, the dtmfcount variable was never decremented, and
so the END was never sent.
In passing, I removed the dtmfsamples variable which was completed unused. I
also removed a redundant setting of the lastrxts variable.
(closes issue #14460)
Reported by: moliveras
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Key rotation was enabled by default by setting the global encryption method to IAX_ENCRYPT_KEYROTATE. the problem with this is that if encryption is not enabled, and the encryption method is set to anything except 0, the peer appears to have encryption enabled when issuing a "iax2 show peers". Rather than have the key rotation bit always set by default, it is now only set when an encryption method is enabled.
(closes issue #14523)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When running asterisk as non-root and without this patch the pidfile wants
to go into /var/run/asterisk.pid. This directory is not writable for
the non-root user and changing permissions is not an option.
Putting it in /var/run/asterisk/asterisk.pid makes it possible
to set permissions on the /var/run/asterisk dir so everything
works as it should be.
Patched committed is based on pabelanger's patch.
(closes issue #13153)
Reported by: pabelanger
Patches:
2009012900_bug13153-nonrootscripts.diff.txt uploaded by mvanbaak (license 7)
Review: http://reviewboard.digium.com/r/139/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r177786 | tilghman | 2009-02-20 16:59:52 -0600 (Fri, 20 Feb 2009) | 9 lines
Don't print the CR-NL combination when we aren't outputting to the manager.
An embedded CR-NL in a CLI command screws up several AMI parsers that don't
expect to see that combination in the middle of output.
(Closes issue #14305)
Reported by: martins
Patch by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to spandsp-0.0.6pre4 the t30_stats_t structure used a pages_transferred
integer to indicate the number of pages transferred (so far) during the fax
session. The spandsp-0.0.6pre4 release removed the pages_transferred integer
and replaced it with two different integers - pages_tx and pages_rx. This
revision uses the new integers for spandsp-0.0.6pre4 while maintaining backwards
compatibility for previous spandsp releases.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
