The spandspflow2pcap.py creates pcap files from fax.log files, generated
through 'fax set debug on' when receiving a fax. An example fax.log is
included as spandspflow2pcap.log.
The sipp-sendfax.xml SIPp scenario can be used to replay that fax with a
recent version of SIPp.
ASTERISK-25660 #close
Change-Id: I4de8f28b084055b482ab8a5b28d28b605b0ed526
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves hangup handler management functions to their own source.
Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves dialplan application management functions to their own source.
Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c
This is the fifth patch in a series meant to reduce the bulk of pbx.c.
This moves ast_switch functions to their own source.
Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e
This is the fourth patch in a series meant to reduce the bulk of pbx.c.
This moves pbx timing functions to their own source.
Change-Id: I05c45186cb11edfc901e95f6be4e6a8abf129cd6
The menuselect conflict between app_voicemail and res_mwi_external
makes it hard to package 1 version of Asterisk. There no actual
build dependencies between the 2 so moving this check to runtime
seems like a better solution.
The ast_vm_register and ast_vm_greeter_register functions in app.c
were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there
is already a voicemail module registered. The modules' load_module
functions were then modified to return DECLINE instead of -1 to the
loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE,
the modules were incorrectly causing Asterisk to stop so this needed
to be cleaned up anyway.
Now you can build both and use modules.conf to decide which voicemail
implementation to load.
The default menuselect options still build app_voicemail and not
res_mwi_external but if both ARE built, res_mwi_external will load
first and become the voicemail provider unless modules.conf rules
prevent it. This is noted in CHANGES.
Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247
This is the third patch in a series meant to reduce the bulk of pbx.c.
This moves channel and global variable routines to their own source.
Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6
If a caller hangs up before dial is executed within an AGI then the AGI
has likely eaten all queued frames before executing the dial in DeadAGI
mode. With the caller hung up and no pending frames from the caller's
read queue, dial would not know that the call has hung up until a called
channel answers. It is rather annoying to whoever just answered the
non-existent call.
Dial should not continue execution in DeadAGI mode, hangup handlers, or
the h exten.
* Added a check early in dial to abort dialing if the caller has hungup.
ASTERISK-25307 #close
Reported by: David Cunningham
Change-Id: Icd1bc0764726ef8c809f76743ca008d0f102f418
Prior to this patch, we explicitly disallowed setting any properties on a
finalized CDR. This seemed like a good idea at the time; in practice, it was
more restrictive.
There are weird and strange scenarios where setting a property on a finalized
CDR is definitely wrong. For example, we may Fork a CDR, finalizing the
previous one, then change a property. In said case, the old CDR is supposed
to now be 'immutable' (so to speak), and should not be updated. From the
perspective of the code, a forked CDR that is finalized is just finalized.
Hence why we decided these should not be updated.
In practice, it is much more common to want to set a property on a CDR in
the h extension or in a hangup handler. Disallowing a common scenario to make
an esoteric behaviour work isn't good. This patch fixes this by allowing
callers to set a property IF we are the last CDR in the chain. This preserves
the finalized CDR if it was forked, while allowing the more common case to
function.
ASTERISK-25458 #close
Change-Id: Icf3553c607b9f561152a41e6d8381d594ccdf4b9
Prior to this patch, the CDR engine attempted to set the end time on a CDR
that was executing hangup logic and with endbeforehexten set to Yes by
calling a function that inspects the properties on the Party A snapshot to
determine if we are ready to set the end time. That always failed. This is
because a Party A snapshot is not updated for CDRs that are executing hangup
logic with endbeforehexten=Yes.
Instead of calling a function that looks at the Party A snapshot, we just
simply set the end time on the CDR. This is safe to call multiple times, and is
safe to call at this point as we know that (a) we are executing hangup logic,
and (b) we are supposed to set the end time at this point.
ASTERISK-25458
Change-Id: I0c27b493861f9c13c43addbbb21257f79047a3b3
This is the second patch in a series meant to reduce the bulk of pbx.c.
This moves custom function management routines to their own source.
Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177
This patch adds a new module, res_pjsip_history, that provides a slightly
better way of debugging SIP message traffic on a busy Asterisk system. The
existing mechanisms all rely on passively dumping a SIP message to the CLI.
While this is perfectly fine for logging purposes and well controlled
environments, on many installations, the amount of SIP messages Asterisk
receives will quickly swamp the CLI. This makes it difficult to view/capture
those messages that you want to diagnose in real time.
This patch provides another way of handling this. When enabled, the module
will store SIP message traffic in memory. This traffic can then be queried
at leisure.
In order to make the querying useful, a CLI command has been implemented,
'pjsip show history', that supports a basic expression syntax similar to
SQL or other query languages. A small number of useful fields have been
added in this initial patch; additional fields can easily be added in
later improvements. Those fields are:
- number: The entry index in the history
- timestamp: The time the message was recieved
- addr: The source/destination address of the message
- sip.msg.request.method: The request method
- sip.msg.call-id: The Call-ID header
Note - this is a resurrection of the module initially proposed on Review Board
here: https://reviewboard.asterisk.org/r/4053/
Change-Id: I39bd74ce998e99ad5ebc0aab3e84df3a150f8e36
We joked about splitting pbx.c into multiple files but this first step was
fairly easy. All of the pbx_builtin dialplan applications have been moved
into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins()
is called by asterisk.c just after load_pbx().
A few functions were renamed and are cross-exposed between the 2 source files.
Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a
The test_timezone_watch unit test is written to expect a
condition to be signaled when the inotify daemon thread runs.
There exists a small window where the test_timezone_watch
thread can signal the inotify daemon thread while it is not
reading on the underlying file descriptor. If this occurs
the test_timezone_watch thread will wait indefinitely for a
signal that will never arrive.
This change adds a timeout to the condition so it will return
regardless after a period of time.
Change-Id: Ifed981879df6de3d93acd3ee0a70f92546517390
The cache_clear test was written to expect duplicate Stasis messages
sent from the technology endpoint to the all caching topic. This patch
fixes the test to no longer expect these duplicate messages.
ASTERISK-25137
Change-Id: I58075d70d6cdf42e792e0fb63ba624720bfce981
Updated ast_websocket_write to encode the entire frame in to one
write operation, to ensure that we don't end up with a situation
where the websocket header has been sent, while the body can not
be written.
Previous to August's patch in commit b9bd3c14, certain network
conditions could cause the header to be written, and then the
sub-sequent body to fail - which would cause the next successful
write to contain a new header, and a new body (resulting in
the peer receiving two headers - the second of which would be
read as part of the body for the first header).
This was patched to have both write operations individually fail
by closing the websocket.
In a case available to the submitter of this patch, the same
body which would consistently fail to write, would succeed
if written at the same time as the header.
This update merges the two operations in to one, adds debug messages
indicating the reason for a websocket connection being closed during
a write operation, and clarifies some variable names for code legibility.
Change-Id: I4db7a586af1c7a57184c31d3d55bf146f1a40598
When an endpoint is created, its messages are forwarded to both the tech
endpoint topic and the all endpoints topic. This is done so that various
parties interested in endpoint messages can subscribe to just the tech
endpoint and receive all messages associated with that particular technology,
as opposed to subscribing to the all endpoints topic. Unfortunately, when the
tech endpoint is created, it also forwards all of its messages to the all
topic. This results in duplicate messages whenever an endpoint publishes its
messages.
This patch resolves the duplicate message issue by creating a new function
for Stasis caching topics, stasis_cp_sink_create. In most respects, this acts
as a normal caching topic, save that it no longer forwards messages it receives
to the all endpoints topic. This allows it to act as an aggregation "sink",
while preserving the necessary caching behaviour.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ie47784adfb973ab0063e59fc18f390d7dd26d17b
websocket_write_timeout was not being set to its default value
during sip config reload, which meant that prior to this commit,
1) the default value of 100 was not used, unless an invalid value
(or 1) was specified in sip.conf for websocket_write_timeout, and
2) if the websocket_write_timeout directive was removed from sip.conf
without a full restart of asterisk, then the previous value would
continue to be used indefinitely.
This essentially lead to a 0ms write timeout (the first write attempt
in ast_careful_fwrite must have succeeded) in websocket write requests
from chan_sip, unless websocket_write_timeout was explicitely set in sip.conf.
Changes to websocket_write_timeout still only apply to new websocket
sessions, after the sip reload -- timeouts on existing sessions are
not adjusted during sip reload.
Change-Id: Ibed3816ed29cc354af6564c5ab3e75eab72cb953
Use of GOTO_ON_BLINDXFR would not work at all. The target location would
never be executed by the transferring channel.
* Made feature_blind_transfer() call ast_bridge_set_after_go_on() with
valid context, exten, and priority parameters from the transferring
channel.
* Renamed some feature_blind_transfer() local variables for clarity.
ASTERISK-25641 #close
Reported by Dmitry Melekhov
Change-Id: I19bead9ffdc4aee8d58c654ca05a198da1e4b7ac
In 450579e908, a change was made that removed the deletion of the
'contact_status' object when a 'contact' object is deleted in sorcery.
This unfortunately means that the 'contact_status' object persists, even when
something has explicitly removed a contact. The result is that the state of
the contact will not be regenerated if that contact is re-created, and the
stale state will be reported/used for that contact. It also results in
no ContactStatusChanged events being generated for either ARI or AMI.
This patch restores the deletion logic that was removed. Doing so now
results in the expected events being generated again.
Change-Id: I28789a112e845072308b5b34522690e3faf58f07
- The maximum_number_of_words was previously documented as being
the number of words that when exceeded, would result in the AMD
application returning that the audio represents a machine.
This was inconsistent with its actual functionality - it was
a number of words that when REACHED, would result in determination
as a machine.
This update corrects the functionality to match the previously
documented functionality. This is a backwards incompatible change
in configuration file, and has been added to UPGRADE.txt as a result.
The sample configuration file and application defaults have been updated
so that the default value is now 2, which reflects the same default
functionality as previous versions.
- Update documentation for silence_threshold, which previously implied
that it was measuring time, rather than noise averages in the sample.
- Update the comments in amd.conf.sample.
ASTERISK-25639 #close
Change-Id: I4b1451e5dc9cb3cb06d59b6ab872f5275ba79093
Resolves an edge case dtls negotiation delay for certain networks which
somehow manage to drop the rtcp side's packet when these are both sent
ast_rtp_remote_address_set, causing it to have to time-out and restart
the handshake.
Move dtls pending bio flush in to it's own function, and call it from
ast_rtp_on_ice_complete, when we're rtp->ice, rather than when
ast_rtp_remote_address_set.
Keep the existing flush from the recent change to res_rtp_remote_address_set
if ice is not being used.
ASTERISK-25614 #close
Reported-by: XenCALL
Tested by: XenCALL
Change-Id: Ie2caedbdee1783159f375589b6fd3845c8577ba5
This change introduces the configuration option 'full_backend_cache'
which changes the cache to be a full mirror of the backend instead
of a per-object cache. This allows all sorcery retrieval operations
to be carried out against it and is useful for object types which
are used in a "retrieve all" or "retrieve some" pattern.
ASTERISK-25625 #close
Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5
When applying an empty DTLS configuration the filenames in the
configuration will be empty. This is actually valid to do and
each filename should simply be ignored.
Change-Id: Ib761dc235638a3fb701df337952f831fc3e69539
Per the documentation the WebSocket support in chan_sip is
supposed to be enabled by default but is not. This change
corrects that.
Change-Id: Icb02bbcad47b11a795c14ce20a9bf29649a54423
The JSON library Asterisk uses, jansson, is not thread
safe for us in a few ways. To help with this wrappers for JSON
object reference count increasing and decreasing were added
which use a global lock to ensure they don't clobber over
each other. This does not extend to reference count manipulation
within the jansson library itself. This means you can't safely
use the object borrowing specifier (O) in ast_json_pack and
you can't share JSON instances between objects.
This change removes uses of the O specifier and replaces them
with the o specifier and an explicit ast_json_ref. Some cases
of instance sharing have also been removed.
ASTERISK-25601 #close
Change-Id: I06550d8b0cc1bfeb56cab580a4e608ae4f1ec7d1
