This commit adds the ability for a user to configure
a resource list in pjsip.conf. Subscribing to this
list simultaneously subscribes the subscriber to all
resources listed. This has the potential to reduce
the amount of SIP traffic when loads of subscribers
on a system attempt to subscribe to each others' states.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed the iax.conf bandwidth option. This is the root cause of
ASTERISK-24150.
* Added checks in iax2_request() to ensure that there are actual formats
requested for the new channel to prevent any more fracks from issues like
ASTERISK-24150. This is a consequence of the iax.conf bandwidth option
not working.
* Fixed struct iax2_codec_pref.order member size mismatch issue when
converting to and from the codec preference order list passed over the
wire. In addition the values sent over the wire are now compatible with
previous Asterisk versions.
* Fixed several issues dealing with the struct iax2_codec_pref members.
Off-by-one, array limit errors, and the order/framing members always need
to be updated together.
* Made iax2_request() setup the channel's native format preference order
according to the user's wishes. The new media format strategy needs the
order specified earler.
* Fixed usage of ast_format_compatibility_bitfield2format(). The function
can return NULL if the bitfield was not associated with a function.
* Deleted dead code iax2_codec_pref_getsize() and
iax2_codec_pref_setsize().
* Made iax2_parse_allow_disallow() and iax2_codec_pref_string() call
iax2_codec_pref_to_cap() instead of inlining it.
* Made IAX_CAPABILITY_MEDBANDWIDTH, IAX_CAPABILITY_LOWBANDWIDTH, and
IAX_CAPABILITY_LOWFREE constants again as they were in Asterisk v1.8.
* Renamed prefs to prefs_global so it won't get confused with the local
pref versions.
* Fixed too small buffer in handle_cli_iax2_show_peer().
* Fixed ast_cli() calls in handle_cli_iax2_show_peer() to output complete
lines.
* Changed struct create_addr_info.prefs to be struct iax2_codec_pref as an
optimization so iax2_request() and iax2_call() do less work.
* Fixed a potential deadlock in ast_iax2_new() on an off-nominal path when
the pbx could not get started.
* Made set_config() setup a local prefs list along side the local
capability format bitfield. Once the config is loaded, then the local
copies are put into the global versions.
* Fix unininialized codec_buf in function_iaxpeer().
ASTERISK-24150 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3890/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module uses the inbound and outbound PUBLISH support to exchange device and mailbox
state between Asterisk instances. Each instance is configured to publish to the other and
requires no intermediary server. The functionality provided is similar to the XMPP and
Corosync support.
Review: https://reviewboard.asterisk.org/r/3780/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hints that are a pattern match are technically stored in the hint container in
the same fashion as concrete implementations of hints. The pattern matching
hints, however, are not "real" in the sense that things can subscribe to them:
rather, they are stored in the hints container so that when a subscription is
made a "real" hint can be generated for the subscription if one does not yet
exist. The extension state core takes care of this correctly by matching
against non-pattern matching extensions prior to pattern matching extensions.
Because of this, however, the ExtensionStateList AMI action was returning
pattern matching hints when executed. These hints are meaningless from the
perspective of AMI clients: their state will never change, they cannot be
subscribed to, and events would never normally be generated from them. As such,
we now filter these out of the response.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI action responses can (and will) reference AMI events that they return.
These event references and definitions should not be combined with AMI events
raised elsewhere in the code, as they are specifically tied to the AMI action
that raised them.
ASTERISK-24156 #close
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When run in offline mode, this would attempt to check the database for
the presence of a type it was going to try to create. I now check the
context to see if we're running in offline mode and change a parameter
accordingly.
........
Merged revisions 407567 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Increased the sippeers useragent max string size to 255.
* Changed the queue_members uniqueid to an auto incremented integer
instead of a string.
* Increased the voicemail_messages BLOB size to LONGBLOB on mysql.
* Fixed the add_tables_for_pjsip config change version downgrade actions
to drop a table it created.
* Adjusted the sample alembic.ini files cdr.ini.sample, config.ini.sample,
and voicemail.ini.sample to give a mysql and postgres sqlalchemy.url
lines.
ASTERISK-23847 #close
Reported by: Stephen More
ASTERISK-23825 #close
Reported by: Stephen More
ASTERISK-23909 #close
Reported by: Stephen More
Review: https://reviewboard.asterisk.org/r/3870/
........
Merged revisions 420211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-23818 (lua contexts being overwritten by contexts of the same name in
pbx_config) surfaced because pbx_lua, having the AST_MODFLAG_GLOBAL_SYMBOLS
set, was always force loaded before pbx_config. Since I couldn't find any
reason for pbx_lua to export it's symbols to the rest of Asterisk, I simply
changed the flag to AST_MODFLAG_DEFAULT. Problem solved. What I didn't
realize was that the symbols need to be exported not because Asterisk needs
them but because any external Lua modules like luasql.mysql need the base
Lua language APIs exported (ASTERISK-17279).
Back to ASTERISK-23818... It looks like there's an issue in pbx.c where
context_merge was only merging includes, switches and ignore patterns if
the context was already existing AND has extensions, or if the context was
brand new. If pbx_lua is loaded before pbx_config, the context will exist
BUT pbx_lua, being implemented as a switch, will never place extensions in
it, just the switch statement. The result is that when pbx_config loads,
it never merges the switch statement created by pbx_lua into the final
context.
This patch sets pbx_lua's modflag back to AST_MODFLAG_GLOBAL_SYMBOLS and adds
an "else if" in context_merge that catches the case where an existing context
has includes, switchs or ingore patterns but no actual extensions.
ASTERISK-23818 #close
Reported by: Dennis Guse
Reported by: Timo Teräs
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3891/
........
Merged revisions 420146 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 420147 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 420148 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420149 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a large swath of response documentation for PJSIPShowEndpoint
and PJSIPShowEndpoints AMI commands. It relies heavily on the existing
text in the configInfo documentation via xi:include tags to avoid
documentation duplication.
Review: https://reviewboard.asterisk.org/r/3888/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now when running PJSIPShowEndpoint, you will receive a
ContactStatusDetail for each bound contact that Asterisk
is qualifying. This information includes the URI of the
contact, current reachability, and roundtrip time.
AFS-91 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3797
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes
to the RTCP topics in Stasis and receives RTCP information back from the
message bus. It encodes into HEPv3 packets and sends the information to the
res_hep module for transmission.
Using this, someone with a Homer server can get live call quality monitoring
for all RTP-based channels in their Asterisk 12+ systems.
In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and
chan_pjsip that were uncovered by the tests written for the Asterisk Test
Suite. This patch fixes the following:
1) chan_pjsip failed to set its channel unique ids on its RTP instance on
outbound calls. It now does this in the appropriate location, in the
serialized call callback.
2) The rtp_engine was overflowing some values when packed into JSON.
Specifically, some longs and unsigned ints can't be be packed into integer
values, for obvious reasons. Since libjansson only supports integers,
floats, strings, booleans, and objects, we print these values into strings.
3) res_rtp_asterisk had a few problems:
(a) it would emit a source IP address of 0.0.0.0 if bound to that IP
address. We now use ast_find_ourip to get a better IP address, and
properly marshal the result into an ast_strdupa'd string.
(b) Reports can be generated with no report bodies. In particular, this
occurs when a sender is transmitting information to a receiver (who
will send no RTP back to the sender). As such, the sender has no report
body for what it received. We now properly handle this case, and the
sender will emit SR reports with no body. Likewise, if we receive an
RTCP packet with no report body, we will still generate the appropriate
events.
ASTERISK-24119 #close
........
Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for an <example /> tag in the XML documentation schema.
For CLI help, this doesn't change the formatting too much:
- Preceeding white space is removed
- Unlike with para elements, new lines are preserved
However, having an <example /> tag in the XML schema allows for the wiki
documentation generation script to surround the documentation with {code} or
{noformat} tags, generating much better content for the wiki - and allowing us
to put dialplan examples (and other code snippets, if desired) into the
documentation for an application/function/AMI command/etc.
Review: https://reviewboard.asterisk.org/r/3807/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds three new AMI commands:
* ExtensionStateList (pbx.c) - list all known extension state hints
and their current statuses. Events emitted by the list action are
equivalent to the ExtensionStatus events.
* PresenceStateList (res_manager_presencestate) - list all known
presence state values. Events emitted are generated by the stasis
message type, and hence are PresenceStateChange events.
* DeviceStateList (res_manager_devicestate) - list all known device
state values. Events emitted are generated by the stasis message
type, and hence are DeviceStateChange events.
Patch-by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3799/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-24124 #close
Reported by Matt Jordan
AFS-131 #close
Reported by Matt Jordan
Patches:
userevent.patch uploaded by Matt Jordan (License #6283)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since the PJSIP INVITE session module is invoked before any session supplements it was
possible for it to handle a redirect before the res_pjsip_diversion module interpreted
and set redirecting information on the channel. This would cause the redirecting
information to get lost.
This patch ensures that session supplements are *always* invoked before a redirect occurs
by explicitly calling them in the redirect handler.
Review: https://reviewboard.asterisk.org/r/3850/
........
Merged revisions 419764 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When creating the alphabetical sorted list each module is added to a list
temporarily. On the second iteration each module already has a pointer to
another module, causing stuff to go into a loop.
ASTERISK-24123 #close
Reported by: Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines
ARI: report duration values in LiveRecording objects
This patch adds three new fields to the LiveRecording model:
- total_duration: the total length of the live recording
- talking_duration: optional. The duration of talking energy that was
detected while the recording was made.
- silence_duration: optional. The duration of silence that was detected while
the recording was made.
These values are reported in the RecordingFinished ARI event.
When a DSP is enabled on the channel during the recording - which occurs when
the recording is created with max_silence_seconds (indicating that the user
actually cares about how much silence is in the file), we will report the
talking_duration and silence_duration in addition to the total_duration.
Review: https://reviewboard.asterisk.org/r/3770/
ASTERISK-24037 #close
Reported by: Samuel Galarneau
........
r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line
Update CHANGES for r419565
........
Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk starts a module (calling its load_module function), it re-orders
the module list, sorting it alphabetically. Ostensibly, this was done so that
the output of 'module show' listed modules in alphabetic order. This had the
unfortunate side effect of making modules with complex usage patterns
unloadable. A module that has a large number of modules that depend on it is
typically abandoned during the unloading process. This results in its memory
not being reclaimed during exit.
Generally, this isn't harmful - when the process is destroyed, the operating
system will reclaim all memory allocated by the process. Prior to Asterisk 12,
we also didn't have many modules with complex dependencies. However, with
the advent of ARI and PJSIP, this can make make unloading those modules
successfully nearly impossible, and thus tracking memory leaks or ref debug
leaks a real pain.
While this patch is not a complete overhaul of the module loader - such an
effort would be beyond the scope of what could be done for Asterisk 13 -
this does make some marginal improvements to the loader such that modules
like res_pjsip or res_stasis *may* be made properly un-loadable in the future.
1. The linked list of modules has been replaced with a doubly linked list. This
allows traversal of the module list to occur backwards. The module shutdown
routine now walks the global list backwards when it attempts to unload
modules.
2. The alphabetic reorganization of the module list on startup has been
removed. Instead, a started module is placed at the end of the module list.
3. The ast_update_module_list function - which is used by the CLI to display
the modules - now does the sorting alphabetically itself. It creates its own
linked list and inserts the modules into it in alphabetic order. This allows
for the intent of the previous code to be maintained.
This patch also contains a fix for res_calendar. Without calendar.conf, the
calendar modules were improperly bumping the use count of res_calendar, then
failing to load themselves. This patch makes it so that we detect whether or
not calendaring is enabled before altering the use count.
Review: https://reviewboard.asterisk.org/r/3777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges created by app_bridgewait previously had the "dissolve when empty" flag set.
This caused the bridge core to destroy them when the last channel had left. This
introduced a race condition where we may have a reference to the bridge but it is
not actually joinable when we try to join it. This flag has now been removed and the
bridge is guaranteed to be joinable at all times.
ASTERISK-23987 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3836/
........
Merged revisions 419538 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "bridge destroy" CLI command is invasive to bridges and can leave them in an unexpected
state for the users of them. Since this command may be useful for developers it is now
only available when developer mode is available. To take its place "all" has been added
as a valid option to the "bridge kick" CLI command. It will kick all of the channels
in the bridge out.
ASTERISK-23987
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3840/
........
Merged revisions 419536 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These change was applied to trunk in r419438
........
chan_sip: sip_subscribe_mwi_destroy should not call sip_destroy
sip_subscribe_mwi_destroy calls sip_destroy on the reference counted
mwi->call. This results in the fields of mwi->call being freed, but
mwi->call itself it leaked. If other code is still using mwi->call
it can cause problems. This change uses dialog_unref instead, to
balance the ref provided by sip_alloc().
ASTERISK-24087 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3834/
........
Merged revisions 419440 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 419441 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In Asterisk, it is possible for a device to have a status of ONHOLD. This is
not typically an easy thing to determine, as a channel being on hold is not
a direct channel state. Typically, this has to be calculated outside of the
core independently in channel drivers, notably, chan_sip and chan_pjsip. Both
of these channel drivers already have to calculate device state in a fashion
more complex than the core can handle, as they aggregate all state of all
channels associated with a peer/endpoint; they also independently track
whether or not one of those channels is currently on hold and mark the device
state appropriately.
In 12+, we now have the ability to report an AST_DEVICE_ONHOLD state for all
channels that defer their device state to the core. This is due to channel hold
state actually now being tracked on the channel itself. If a channel driver
defers its device state to the core (which many, such as DAHDI, IAX2, and
others do in most situations), the device state core already goes out to get a
channel associated with the device. As such, it can now also factor the channel
hold state in its calculation.
This patch adds this logic to the device state core. It also uses an existing
mapping between device state and channel state to handle more channel states.
chan_pjsip has been updated slightly as well to make use of this (as it was,
for some reason, reporting a channel state of BUSY as a device state of INUSE,
which feels slightly wrong).
Review: https://reviewboard.asterisk.org/r/3771/
ASTERISK-24038 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419358 65c4cc65-6c06-0410-ace0-fbb531ad65f3
