Given a scenario where session refreshes occur close to
each other while another is finishing it was possible for
the session refreshes to occur out of order. It was
also possible for session refreshes to be delayed for
quite some time if a session refresh did not result in
a topology change.
For the out of order session refreshes the first session
refresh would be queued due to a transaction in progress.
This transaction would then finish. When finished a
separate task to process the delayed requests queue
would be queued for handling. A second refresh would
be requested internally before this delayed request
queued task was processed. As no transaction was in
progress this session refresh would be immediately
handled before the queued session refresh.
The code will now check if any delayed requests exist
before allowing a session refresh to immediately occur.
If any exist then the session refresh is queued.
For the delayed session refreshes if a session refresh
did not result in a topology change the attempt would
be immediately stopped and no other delayed requests would
be processed.
The code will now go through the entire delayed requests
queue until a delayed request results in a request
actually being sent.
ASTERISK-28730
Change-Id: Ied640280133871f77d3f332be62265e754605088
Currently aptitude is installed using interactive mode. This patch
changes this to use the non-interactive mode as it can block
automatic dependencies installation, ex: CI, Docker build.
ASTERISK-28726 #close
Change-Id: I271ee00d230513a6f044810351a32d83b2181133
The code assumed that when the transport-cc feedback
function was called at least one packet will have been
received. In practice this isn't always true, so now
we just reschedule the sending and do nothing.
Change-Id: Iabe7b358704da446fc3b0596b847bff8b8a0da6a
In order to reduce the amount of AMI and ARI events generated,
the global "Message/ast_msg_queue" channel can be set to suppress
it's normal channel housekeeping events such as "Newexten",
"VarSet", etc. This can greatly reduce load on the manager
and ARI applications when the Digium Phone Module for Asterisk
is in use. To enable, set "hide_messaging_ami_events" in
asterisk.conf to "yes" In Asterisk versions <18, the default
is "no" preserving existing behavior. Beginning with
Asterisk 18, the option will default to "yes".
NOTE: This change does not affect UserEvents or the ARI
TextMessageReceived events.
* Added the "hide_messaging_ami_events" option to asterisk.conf.
* Changed message.c to set the AST_CHAN_TP_INTERNAL property on
the "Message/ast_msg_queue" channel if the option is set in
asterisk.conf. This suppresses the reporting of the events.
Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b
If you're for some reason out of RTP ports, chan_sip would previously
responde to an INVITE with a 403, which will fail the call.
Now, it returns a 503, allowing the device/proxy to retry the call on a
different machine.
ASTERISK-28718
Change-Id: I968dcf6c1e30ecddcce397dcda36db727c83ca90
When res_config_odbc (and perhaps other realtime backends) reads a SQL
NULL from the database, it coalesces the value to the empty string
which prevents it from being returned to the realtime core.
However, if it instead reads the empty string from the database, it
needs a way to encode that fact without having the value omitted
entirely. It does this by changing the value to a string with a single
space. The realtime code in main/config.c recognizes this special case
and _turns the string back into the empty string_ before passing it to
realtime API consumers.
For all of this to work, we need to ensure that we actually pass the
single-space-string back to the realtime core, which is currently
failing because we are trimming the value before checking its
content. So instead we now special case the single-space-string case
so that empty values are returned properly.
ASTERISK-28719 #close
Reported by: EDV O-TON
Change-Id: I673ed8c31ad037aa224e80c78c7a1dc4e4a4e3de
Incrementing stasis_app_playback.media_index directly in our playback
loop means that when we reach the end of our playlist the index into
the vector will be outside of the bounds of the vector.
Instead use a temporary variable and only assign when we're sure that
we are in bounds.
ASTERISK-28713 #close
Reported by: Sébastien Duthil
Change-Id: Ib53f7f156097e0607eb5871d9d78d246ed274928
Each subscription needs to have a reference to the persisted data
for it, as well as the main JSON contained within the tree. When
recreating a subscription this did not occur and they both shared
the same reference.
ASTERISK-28714
Change-Id: I706abd49ea182ea367a4ac3feca2706460ae9f4a
It said "restrict [...] which peers should be able to pass [audio]
to each other".
However, these settings are not global (for which you would expect
signaling IPs to be checked). These settings are available per peer
only, and the IPs being checked, are the RTP IPs.
Change-Id: I2a6c6cd7c2f5f30d1df4844e3e0308a077021660
Calling 'app_send' eventually calls the app's message handler. It's possible
for a handler to obtain a lock on another object, and then need/want to lock
the app object. If the caller of 'app_send' locks the app object prior to
calling then there's a potential for a deadlock, if another thread calls
'app_send' without locking.
This patch makes it so 'app_send' is not called with the app object locked in
the section of code doing such.
ASTERISK-28423 #close
Change-Id: I6767c6d0933c7db1b984018966eefca4c0638a27
The cleanup code in stasis shuts down applications if they are in a deactivated
state, and no longer have explicit subscriptions. When registering an app the
cleanup code was running before calling 'update'. When it should be executed
after 'update' since a call to register may re-activate the app. We don't want
it to shutdown before the 'update' otherwise the app won't be re-activated,
or registered.
This patch makes it so the cleanup code is executed post 'update'.
ASTERISK-28679 #close
Change-Id: I8f2c0b17e33bb8128441567b97fd4c7bf74a327b
We need to wait for the message sending callback to finish to know if
we succeeded or failed.
ASTERISK-25421 #close
Reported by: Dmitriy Serov
Change-Id: I22b954398821d2caf4c6fe58f0607c8cfa378059
Fixes no-audio issues when the media source is changed and
strictrtp is enabled (default).
If the peer media source changes, the SDP session version also changes.
If it is lower than the one we had stored, chan_sip would ignore it.
This changeset keeps track of the remote media origin identifier,
comparing that as well. If it changes, the session version needn't be
higher for us to accept the SDP.
Common scenario where this would've caused problems: a separate media
gateway that informs the caller about premium rates before handing off
the call to the final destination.
(An alternative fix would be to set ignoresdpversion=yes on the peer.)
ASTERISK-28686
Change-Id: I88fdbc5aeb777b583e7738c084254c482a7776ee
If chan_pjsip receives an RTP packet whose payload differs from the
channel's native format, and asymmetric_rtp_codec is disabled (the
default), Asterisk will switch the channel's native format to match
that of the incoming packet without regard to the negotiated payloads.
We now check that the received frame is in a format we have negotiated
before switching payloads which results in these packets being dropped
instead of causing the session to terminate.
ASTERISK-28139 #close
Reported by: Paul Brooks
Change-Id: Icc3b85cee1772026cee5dc1b68459bf9431c14a3
When Alice calls Bob and Bob does a blind transfer to Charlie,
Bob's bridge leave event generates a finalize on both the party_a
and party_b CDRs but while the party_a CDR has the correct end time
set from the event time, party_b's leg did not. This caused that
CDR's end time to be equal to the answered time and resulted in a
billsec of 0.
* We now pass the bridge leave message event time to
cdr_object_party_b_left_bridge_cb() and set it on that CDR before
calling cdr_object_finalize() on it.
NOTE: This issue affected transfers using chan_sip most of the
time but also occasionally affected chan_pjsip probably due to
message timing.
ASTERISK-28677
Reported by: Maciej Michno
Change-Id: I790720f1e7326f9b8ce8293028743b0ef0fb2cca
Add a new configuration option 'enable_status' which allows the
/httpstatus URI handler to be administratively disabled.
We also no longer unconditionally register the /static and /httpstatus
URI handlers, but instead do it based upon configuration.
Behavior change: If enable_static was turned off, the URI handler was
still installed but returned a 403 when it was accessed. Because we
now register/unregister the URI handlers as appropriate, if the
/static URI is disabled we will return a 404 instead.
Additionally:
* Change 'enablestatic' to 'enable_static' but keep the former for
backwards compatibility.
* Improve some internal variable names
ASTERISK-28710 #close
Change-Id: I647510f796473793b1d3ce1beb32659813be69e1
The no-entry timeout set to 999999 == 16⅔ minutes, change to INT_MAX
to match behavior of "no timeout" defined in comment.
ASTERISK-28702 #close
Change-Id: I4ea015986e061374385dba247b272f7aac60bf11
SILK @ 24kHz is not shown in the 'core show translation' output because of an
off-by-one-error. Discovered while looking into ASTERISK~19871.
ASTERISK-28706
Reported by: Sean Bright
Change-Id: Ie1a551a8a484e07b45c8699cc0c90f1061029510
* The MailboxExists dialplan application was deprecated on 2006-09-26
in Asterisk 1.6.0 (commit ec83b11183)
* The MAILBOX_EXISTS dialplan function was deprecated on 2011-12-06 in
Asterisk 11.0.0 (commit fd64bb66f9)
Change-Id: I71cfc9d7b9217a37b802f4cc6ef2d57900b7398f
