https://origsvn.digium.com/svn/asterisk/trunk
................
r209839 | russell | 2009-08-01 06:02:07 -0500 (Sat, 01 Aug 2009) | 20 lines
Merged revisions 209838 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209838 | russell | 2009-08-01 05:59:05 -0500 (Sat, 01 Aug 2009) | 13 lines
Modify how Playtones() is used in Milliwatt() to resolve gain issue.
When Milliwatt() was changed internally to use Playtones() so that the proper
tone was used, it introduced a drop in gain in the output signal. So, use
the playtones API directly and specify a volume argument such that the output
matches the gain of the original Milliwatt() code.
(closes issue #15386)
Reported by: rue_mohr
Patches:
issue_15386.rev2.diff uploaded by russell (license 2)
Tested by: rue_mohr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@209841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r209760 | kpfleming | 2009-07-31 20:03:07 -0500 (Fri, 31 Jul 2009) | 13 lines
Merged revisions 209759 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209759 | kpfleming | 2009-07-31 19:52:00 -0500 (Fri, 31 Jul 2009) | 7 lines
Minor changes inspired by testing with latest GCC.
The latest GCC (what will become 4.5.x) has a few new warnings, that in these
cases found some either downright buggy code, or at least seriously poorly
designed code that could be improved.
........
................
r209761 | kpfleming | 2009-07-31 20:04:06 -0500 (Fri, 31 Jul 2009) | 1 line
Revert accidental Makefile change.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@209781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r209256 | kpfleming | 2009-07-27 16:21:43 -0500 (Mon, 27 Jul 2009) | 10 lines
Make T.38 switchover in ReceiveFAX synchronous.
In receive mode, if the channel that ReceiveFAX is running on supports T.38,
we should *always* attempt to switch T.38, rather than listening for an incoming
CNG tone and only triggering on that. The channel may be using a low-bitrate
codec that distorts the CNG tone, the sending FAX endpoint may not send CNG
at all, or there could be a variety of other reasons that we don't detect it,
but in all those cases if T.38 is available we certainly want to use it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@209262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r209132 | mmichelson | 2009-07-27 12:50:04 -0500 (Mon, 27 Jul 2009) | 24 lines
Merged revisions 209131 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209131 | mmichelson | 2009-07-27 12:44:06 -0500 (Mon, 27 Jul 2009) | 18 lines
Allow for UDPTL to use only even-numbered ports if desired.
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@209134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r209056 | kpfleming | 2009-07-27 10:38:59 -0500 (Mon, 27 Jul 2009) | 10 lines
Restore explicit export of ASTCFLAGS/ASTLDFLAGS and underscore-variants to sub-makes.
During the recent Makefile improvements I made, it seemed the 'make' was
automatically carrying down the ASTCFLAGS/ASTLDFLAGS settings to sub-makes,
so I removed the explict export of them. However, there are some circumstances
where make does this, and some where it does not, so I've brought them back
to ensure they are always exported. I also removed an extraneous double setting
of _ASTLDFLAGS on *BSD platforms.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@209058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r208813 | mvanbaak | 2009-07-25 14:03:25 +0200 (Sat, 25 Jul 2009) | 10 lines
add default alias reload to run module reload.
Requiring 'module reload' to reload everything, including
core etc makes russell very unhappy.
The default configuration already loads the 'friendly' aliases template.
Added 'reload=module reload' to that template.
Also removed the comment in main/cli.c that reload should come back.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208749 | jpeeler | 2009-07-25 01:23:18 -0500 (Sat, 25 Jul 2009) | 13 lines
Merged revisions 208746 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208746 | jpeeler | 2009-07-25 01:19:50 -0500 (Sat, 25 Jul 2009) | 7 lines
Fix compiling under dev-mode with gcc 4.4.0.
Mostly trivial changes, but I did not know of any other way to fix the
"dereferencing type-punned pointer will break strict-aliasing rules" error
without creating a tmp variable in chan_skinny.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208754 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r208622 | mmichelson | 2009-07-24 14:24:28 -0500 (Fri, 24 Jul 2009) | 16 lines
Don't impose an arbitrary limit on member lines in queues.conf
I know what some of you are thinking: "UGH! Mark, why are you using
ast_strdup and ast_free for the string when you can just use ast_strdupa
and let the memory free itself?! Have the bats been chewing on your brain
again?"
Based on past experiences, I don't like using ast_strdupa inside a loop.
It's a good way to potentially exhaust stack space. Also, since this only
happens when reloading queues, I don't think that heap allocations and
frees are going to be a huge problem.
(closes issue #15559)
Reported by: amorsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208588 | mmichelson | 2009-07-24 13:31:04 -0500 (Fri, 24 Jul 2009) | 16 lines
Merged revisions 208587 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208587 | mmichelson | 2009-07-24 13:26:50 -0500 (Fri, 24 Jul 2009) | 10 lines
Only send a BYE when hanging up a channel that is up.
For cases where Asterisk sends an INVITE and receives a non 2XX final
response, Asterisk would follow the INVITE transaction by immediately
sending a BYE, which was unnecessary.
(closes issue #14575)
Reported by: chris-mac
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208548 | kpfleming | 2009-07-24 10:02:53 -0500 (Fri, 24 Jul 2009) | 8 lines
Resolve a T.38 negotiation issue left over from the udptl-updates merge.
The udptl-updates branch that was merged yesterday failed to properly send back
T.38 SDP responses with the correct error correction mode, if the incoming SDP
from the other end caused us to change error correction modes. This patch
corrects that situation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208542 | mvanbaak | 2009-07-24 16:35:49 +0200 (Fri, 24 Jul 2009) | 13 lines
use aptitude for debian based systems
The function to check wether we need to install packages was using
dpkg-query which was gives wrong output on Debian 5
Also, the apt-get has been replaced with aptitude because aptitude
is now the preferred way to handle packages on Debian
(closes issue #15570)
Reported by: mvanbaak
Patches:
2009072400_installprereq-aptitude.diff uploaded by mvanbaak (license 7)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208464 | kpfleming | 2009-07-23 16:57:24 -0500 (Thu, 23 Jul 2009) | 46 lines
Rework of T.38 negotiation and UDPTL API to address interoperability problems
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208388 | mmichelson | 2009-07-23 14:34:49 -0500 (Thu, 23 Jul 2009) | 24 lines
Merged revisions 208386 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208386 | mmichelson | 2009-07-23 14:24:21 -0500 (Thu, 23 Jul 2009) | 17 lines
Fix a problem where a 491 response could be sent out of dialog.
This generalizes the fix for issue 13849. The initial fix corrected the
problem that Asterisk would reply with a 491 if a reinvite were received
from an endpoint and we had not yet received an ACK from that endpoint
for the initial INVITE it had sent us. This expansion also allows Asterisk
to appropriately handle an INVITE with authorization credentials if Asterisk
had not received an ACK from the previous transaction in which Asterisk had
responded to an unauthorized INVITE with a 407.
(closes issue #14239)
Reported by: klaus3000
Patches:
14239.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r208267 | jpeeler | 2009-07-23 10:59:44 -0500 (Thu, 23 Jul 2009) | 13 lines
Fix sending of interface identifier unconditionally in sig_pri
The wrong logic was being used in chan_dahdi to convert a sig_pri_chan
to the proper libpri channel number. The most significant bit must only
be set only when trunk groups are being used.
(closes issue #15452)
Reported by: alecdavis
Patches:
bug15452.patch uploaded by jpeeler (license 325)
Tested by: alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r208155 | jpeeler | 2009-07-22 17:42:33 -0500 (Wed, 22 Jul 2009) | 5 lines
Reset the fax buffers back to default settings regardless of signaling in use -
Pointed out by Matt F.
Also in the case of not using a signaling module, set the law back to the
default as well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208113 | qwell | 2009-07-22 16:43:57 -0500 (Wed, 22 Jul 2009) | 9 lines
Restore an int declaration on PPC platforms.
This x is one crafty little bugger...
It was used for 2 different things (one of which was only done on PPC) in 1.4.
One of the uses were removed in trunk, and with it went the declaration.
(closes issue #14038)
Reported by: ffloimair
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207946 | tilghman | 2009-07-21 17:45:32 -0500 (Tue, 21 Jul 2009) | 15 lines
Merged revisions 207945 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207945 | tilghman | 2009-07-21 17:38:54 -0500 (Tue, 21 Jul 2009) | 8 lines
Force an error if a blank is passed to QUOTE (because the documentation states the argument is not optional).
This change makes URIENCODE and QUOTE behave similarly, since the documentation
states that the argument is not optional, for both.
(closes issue #15439)
Reported by: pkempgen
Patches:
20090706__issue15439.diff.txt uploaded by tilghman (license 14)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207680 | kpfleming | 2009-07-21 08:28:04 -0500 (Tue, 21 Jul 2009) | 18 lines
Merged revisions 207647 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new dahdi_wait function to specifically wait for the wink
event. If the wink is not eventually received the channel is hung up.
(closes issue #14434)
Reported by: araasch
Patches:
emwinkmod uploaded by araasch (license 693)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207424 | mmichelson | 2009-07-20 14:48:12 -0500 (Mon, 20 Jul 2009) | 39 lines
Merged revisions 207423 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207423 | mmichelson | 2009-07-20 14:39:59 -0500 (Mon, 20 Jul 2009) | 33 lines
Answer video SDP offers properly when videosupport is not enabled.
Copied from Review board:
In issue 12434, the reporter describes a situation in which audio and video
is offered on the call, but because videosupport is disabled in sip.conf,
Asterisk gives no response at all to the video offer. According to RFC 3264,
all media offers should have a corresponding answer. For offers we do not
intend to actually reply to with meaningful values, we should still reply
with the port for the media stream set to 0.
In this patch, we take note of what types of media have been offered and
save the information on the sip_pvt. The SDP in the response will take into
account whether media was offered. If we are not otherwise going to answer
a media offer, we will insert an appropriate m= line with the port set to 0.
It is important to note that this patch is pretty much a bandage being
applied to a broken bone. The patch *only* helps for situations where video
is offered but videosupport is disabled and when udptl_pt is disabled but
T.38 is offered. Asterisk is not guaranteed to respond to every media offer.
Notable cases are when multiple streams of the same type are offered.
The 2 media stream limit is still present with this patch, too.
In trunk and the 1.6.X branches, things will be a bit different since Asterisk
also supports text in SDPs as well.
(closes issue #12434)
Reported by: mnnojd
Review: https://reviewboard.asterisk.org/r/311
Review: https://reviewboard.asterisk.org/r/313
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207361 | russell | 2009-07-20 11:36:15 -0500 (Mon, 20 Jul 2009) | 16 lines
Merged revisions 207360 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207360 | russell | 2009-07-20 11:26:24 -0500 (Mon, 20 Jul 2009) | 9 lines
Only do the chan->fdno check in ast_read() in a developer build.
I changed this check to only happen in a dev-mode build. I also added a
comment explaining what is going on. I also made it so that detection of
this situation does not affect ast_read() operation.
(closes issue #14723)
Reported by: seadweller
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
to make merging easier. These changes are already on trunk.
................
r145293 | rmudgett | 2008-09-30 18:55:24 -0500 (Tue, 30 Sep 2008) | 54 lines
channels/chan_misdn.c
channels/misdn/isdn_lib.c
* Miscellaneous other fixes from trunk to make merging easier later.
........
r145200 | rmudgett | 2008-09-30 16:00:54 -0500 (Tue, 30 Sep 2008) | 7 lines
* Miscellaneous formatting changes to make v1.4 and trunk
more merge compatible in the mISDN area.
channels/chan_misdn.c
* Eliminated redundant code in cb_events() EVENT_SETUP
........
r144257 | crichter | 2008-09-24 03:42:55 -0500 (Wed, 24 Sep 2008) | 9 lines
improved helptext of misdn_set_opt.
........
r142181 | rmudgett | 2008-09-09 12:30:52 -0500 (Tue, 09 Sep 2008) | 1 line
Cleaned up comment
........
r138738 | rmudgett | 2008-08-18 16:07:28 -0500 (Mon, 18 Aug 2008) | 30 lines
channels/chan_misdn.c
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/misdn.txt (doc/tex/misdn.tex)
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
................
r158010 | rmudgett | 2008-11-19 19:46:09 -0600 (Wed, 19 Nov 2008) | 9 lines
Merged revision 157977 from
https://origsvn.digium.com/svn/asterisk/team/group/issue8824
........
Fixes JIRA ABE-1726
The dial extension could be empty if you are using MISDN_KEYPAD
to control ISDN provider features.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
