This patch fixes an access to the peer callnumber that is unprotected by a
corresponding mutex. The peer->callno value can be changed by multiple threads,
and all data inside the iaxs array must be procted by a corresponding lock
of iaxsl.
The patch moves the unprotected access to a location where the mutex is
safely obtained.
Review: https://reviewboard.asterisk.org/r/4599/
ASTERISK-21211 #close
Reported by: Jaco Kroon
patches:
asterisk-11.2.1-iax2_poke-segfault.diff submitted by Jaco Kroon (License 5671)
........
Merged revisions 434291 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When udpbindaddr is set to the IPv6 bind all address of '::', Asterisk will
attempt to handle both IPv4 and IPv6 addresses, although the information will
be stored in a struct with an AF_INET6 address type. However, the current
NAT handling code won't handle the IPv4 mapped IPv6 addresses correctly.
This patch adds an additional check for the mapped address case, allowing
the NAT code to handle clients even when the address is IPv6.
Review: https://reviewboard.asterisk.org/r/4563/
ASTERISK-18032 #close
Reported by: Christoph Timm
patches:
nat_with_ipv6.diff submitted by Valentin Vidić (License 6697)
........
Merged revisions 434288 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes several warnings pointed out by the clang compiler.
* chan_pjsip: Removed check for data->text, as it will always be non-NULL.
* app_minivm: Fixed evaluation of etemplate->locale, which will always
evaluate to 'true'. This patch changes the evaluation to use
ast_strlen_zero.
* app_queue:
- Fixed evaluation of qe->parent->monfmt, which always evaluates to
true. Instead, we just check to see if the dereferenced pointer
evaluates to true.
- Fixed evaluation of mem->state_interface, wrapping it with a call to
ast_strlen_zero.
* res_smdi: Wrapped search_msg->mesg_desk_term with calls to ast_strlen_zero.
Review: https://reviewboard.asterisk.org/r/4541
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4541.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434285 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After completing an attended transfer the transfer target channel (the one that
gets swapped out) was not being hung up after leaving the bridge. This resulted
in a channel possibly being left around. Added an explicit softhangup for the
channel in question after the transfer is successfully completed in order to
make sure the channel is hung up.
ASTERISK-24782 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4575/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If we receive a MESSAGE request that we cannot send a response
to, we should not send the incoming MESSAGE to the dialplan.
This commit should help the bouncing message_retrans test to
pass consistently.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some applications - such as SLA - a phone pressing hold should not behave
in the fashion that the Asterisk core would like it to. Instead, the hold
action has some application specific behaviour associated with it - such as
disconnecting the channel that initiated the hold; only playing MoH to channels
in the bridge if the channels are of a particular type, etc.
One way of accomplishing this is to use a framehook to intercept the
hold/unhold frames, raise an event, and eat the frame. Tasty. This patch
accomplishes that using a new dialplan function, HOLD_INTERCEPT.
In addition, some general cleanup of raising hold/unhold Stasis messages was
done, including removing some RAII_VAR usage.
Review: https://reviewboard.asterisk.org/r/4549/
ASTERISK-24922 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting the configuration option 'timers' equal to 'no' the bit flag was
not properly negated. This patch clears all associated flags and only sets the
specified one. pjsip will handle any necessary flag combinations. Also went
ahead and did similar for the '100rel' option.
ASTERISK-24910 #close
Reported by: Ray Crumrine
Review: https://reviewboard.asterisk.org/r/4582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These are fixes for compilation under gcc 5.0...
chan_sip.c: In parse_request needed to make 'lim' unsigned.
inline_api.h: Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99
inline semantics (same as clang).
ccss.c: In ast_cc_set_parm, needed to fix weird comparison.
dsp.c: Needed to work around a possible compiler bug. It was throwing
an array-bounds error but neither
sgriepentrog, rmudgett nor I could figure out why.
manager.c: In action_atxfer, needed to correct an array allocation.
This patch will go to 11, 13, trunk.
Review: https://reviewboard.asterisk.org/r/4581/
Reported-by: Jeffrey Ollie
Tested-by: George Joseph
ASTERISK-24932 #close
........
Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a warning caught by clang, in which it detected that large
chunks of extconf were unused. Frankly, I wish we could pretend that all of
extconf was unused, but alas, that is not yet the case.
A few extraneous functions in the parking tests were removed as well, for
the same reason.
Review: https://reviewboard.asterisk.org/r/4553
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4553.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434093 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an invalid format specifier used in the formatting of an
ERROR message in the framehook code. The format specifier specifies a
type of 'unsigned short', but the argument passed to it is of type 'int'.
The patch changes the format specifier to 'i'.
Review: https://reviewboard.asterisk.org/r/4540
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4535.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434087 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Versions of Asterisk prior to 12 defaulted to 8000 as a sample rate
if one was not provided by a format. In Asterisk 13, this was removed.
The result was that some calculations which involve dividing by the
sample rate resulted in dividing by 0. The fix being put in place
here is to have the same default fallback that was present in previous
versions of Asterisk.
Asterisk-24914 #close
Reported by Marcello Ceschia
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_pjsip_phoneprov_provider is using ao2_callback with OBJ_MULTIPLE, then
ignoring the return. OBJ_NODATA flag was to prevent a reference leak, but
this caused the module to FRACK on unload. Revert change until this can
be investigated further.
ASTERISK-24935
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4578/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434025 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a change to align behavior with that of Asterisk 11 and previous versions.
In those versions, if a parked call were retrieved, and the call ended, the parked
call retriever would be hung up after the ParkedCall application ran. Prior to this
patch, in Asterisk 13, the same situation would result in the parked call retriever
falling through to additional priorities in the extension where the ParkedCall
application was called. With this patch, the behavior between Asterisk 11 and 13
aligns.
ASTERISK-24899 #close
Reported by Malcolm Davenport
Patches:
ASTERISK-24899.patch uploaded by Mark Michelson(license #5049)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outbound SIP MESSAGEs had the potential to be sent out
of order from how they were specified in a set of
dialplan steps.
This change creates a serializer for sending outbound
MESSAGE requests on. This ensures that the MESSAGEs are
sent by Asterisk in the same order that they were sent
from the dialplan.
ASTERISK-24937 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4579
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A change in r430179 inserted a variable near the top of a
structure caused a problem when running DPMA in a version
of Asterisk compiled across the change. This patch moves
the new variable to the end of the structure, eliminating
the problem.
Review: https://reviewboard.asterisk.org/r/4574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an error occurs while writing to a web socket, the web socket is
disconnected and the event is logged. A side-effect of this, however, is that
any application on the other side waiting for a response from Stasis is left
hanging indefinitely (as there is no mechanism presently available for
notifying interested parties about web socket error states in Stasis).
To remedy this scenario, this patch introduces a new channel variable:
STASISSTATUS.
The possible values for STASISSTATUS are:
SUCCESS - The channel has exited Stasis without any failures
FAILED - Something caused Stasis to croak. Some (not all) possible
reasons for this:
- The app registry is not instantiated;
- The app requested is not registered;
- The app requested is not active;
- Stasis couldn't send a start message
ASTERISK-24802
Reported By: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/4519/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some invalid enum conversion warnings caught by clang. In
particular:
* chan_sip: Several functions mixed usage of the st_refresher_param
enum and st_refresher enum. This patch corrects the functions to use the
right enum.
* chan_pjsip: Fixed mixed usage of ast_sip_session_t38state and ast_t38_state.
* strings: Fixed incorrect usage of AO2 flags with strings container.
* res_stasis: Change a return enumeration to stasis_app_user_event_res.
Review: https://reviewboard.asterisk.org/r/4535
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4535.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433746 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch in r433720 caused a warning to be kicked back by gcc. It occurred
due to this check in unistd.h:
if (__nbytes > __bos0 (__buf))
return __read_chk_warn (__fd, __buf, __nbytes, __bos0 (__buf));
That is, if __nbytes is greater than the result of GCC's built-in object size
for the struct, we'll kick back a warning.
As it turns out, this is because there is an error in the code in the patch.
We are passing the address of the pointer to the struct, not iev, which is a
pointer to the struct. Hence, the number of bytes is probably going to be lot
larger than the number of bytes that make up a pointer! This patch changes
the code just read from the pointer to the struct - which fixes the warning.
ASTERISK-24917
........
Merged revisions 433743 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's build system has a tendency to pass include directives for libraries
to everything compiled within a particular group of source files. This means
we pass the header for libxml2 to things that don't necessarily need it. As a
result, we ignore this particular warning.
Review: https://reviewboard.asterisk.org/r/4545/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4545.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433720 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a warning caught by clang, wherein a variable sized struct is
not located at the end of a struct. While the code in question actually
expected this, this is a good warning to watch for. Hence, this patch refactors
the code in question to not have two variable length elements in the same
struct.
Review: https://reviewboard.asterisk.org/r/4530/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4530.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433717 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Assigning a variable to itself isn't super useful. However, the WAV format
modules make use of this in order to perform byte endian checks. This patch
works around the warning by only performing the self assignment if we are
going to do more than just assign it to ourselves. Which is odd, but true.
Review: https://reviewboard.asterisk.org/r/4544/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4544.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes clange compiler warnings for initializer overrides.
Specifically:
res_pjsip/config_transport maps PJSIP_TLSV1_METHOD to the same enumeration
value as PJSIP_SSL_DEFAULT_METHOD. When initializing an array containing
those enum values, we therefore initialize the value twice to two different
values, "tlsv1" and "default". This patch changes it to just initialize
the index in the array to "tlsv1".
Review: https://reviewboard.asterisk.org/r/4539/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4539.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk had an issue where retransmissions of MESSAGE requests resulted in
Asterisk processing the retransmission as if it were a new MESSAGE request.
This patch fixes the issue by creating a transaction in PJSIP on the incoming
request. This way, if a retransmission arrives, the PJSIP transaction layer
will resend the response and Asterisk will not ever see the retransmission.
ASTERISK-24920 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4532/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the kqueue timing module to conform to current timer API.
This fixes issues with using the kqueue timing source on Asterisk 13 on
FreeBSD 10. These issues include:
- Remove support for kevent64(). The values used to support Asterisk timers
fit within 32bits and so can be handled on all platforms via kevent().
- Provide debug logging for, but do not track, unacked events. This matches
the behavior of all other timer implementations.
- Implement continuous mode by triggering and leaving active, a user event.
This ensures that the file descriptor for the timer returns immediately from
poll(), without placing the load of a high speed timer on the kernel.
- In kqueue_timer_get_max_rate(), don't overstate the capability of the timer.
On some platforms, UINT_MAX is greater than INTPTR_MAX, the largest integer
type kqueue supports for timers.
- In kqueue_timer_get_event(), assume the caller woke up from poll() and just
return the mode the timer is currently in. This matches all other timer
implementations.
- Adjust the test code now that unacked events are not tracked.
Review: https://reviewboard.asterisk.org/r/4465/
ASTERISK-24857 #close
Reported by: scsiguy
Tested by: Ed Hynan
patches:
rb4465.patch submitted by scsiguy (License 6692)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new logger routine ast_log_safe. This routine should be
used for all error messages in code that can be run as a result of ast_log.
ast_log_safe does nothing if run recursively. All error logging in
astobj2.c, strings.c and utils.h have been switched to ast_log_safe.
This required adding support for raw threadstorage. This provides direct
access to the void* pointer in threadstorage. In ast_log_safe, NULL is used
to signify that this thread is not already running ast_log_safe, (void*)1 when
it is already running. This was done since it's critical that ast_log_safe
do nothing that could log during recursion checking.
ASTERISK-24155 #close
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/4502/
........
Merged revisions 433522 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
