https://origsvn.digium.com/svn/asterisk/trunk
................
r185122 | rmudgett | 2009-03-30 15:41:24 -0500 (Mon, 30 Mar 2009) | 26 lines
Merged revisions 185120 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185120 | rmudgett | 2009-03-30 15:38:11 -0500 (Mon, 30 Mar 2009) | 19 lines
Make chan_misdn BRI TE side normally defer channel selection to the NT side.
Channel allocation collisions are not handled by chan_misdn very well.
This patch simply avoids the problem for BRI only.
For PRI, allocation collisions are still possible but less likely since
there are simply more channels available and each end could use a different
allocation strategy.
misdn.conf options available:
te_choose_channel - Use to force the TE side to allocate channels.
method - Specify the channel allocation strategy.
(closes issue #13488)
Reported by: Christian_Pinedo
Patches:
isdn_lib.patch.txt uploaded by crich
Tested by: crich, siepkes, festr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@185124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185072 | mmichelson | 2009-03-30 11:26:48 -0500 (Mon, 30 Mar 2009) | 45 lines
Merged revisions 185031 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185031 | mmichelson | 2009-03-30 11:17:35 -0500 (Mon, 30 Mar 2009) | 39 lines
Fix queue weight behavior so that calls in low-weight queues are not inappropriately blocked.
(This is copied and pasted from the review request I made for this patch)
Asterisk has some odd behavior when queue weights are used. The current logic used when
potentially calling a queue member is:
If the member we are going to call is part of another queue and _that other queue has any
callers in it_ and has a higher weight than the queue we are calling from, then don't try
to contact that member. The issue here is what I have marked with underscores. If the
higher-weighted queue has any callers in it at all, then the queue member will be unreachable
from the lower-weighted queue. This has the potential to be really really bad if using a
queue strategy, such as leastrecent or fewestcalls, with the potential to call the same
member repeatedly.
The fix proposed by garychen on issue 13220 is very simple and, as far as I can see, works
well for this situation. With this set of changes, the logic used becomes:
If the member we are going to call is part of another queue, the other queue has a higher
weight than the queue we are calling from, and the higher weight queue has at least as many
callers as available members, then do not try to contact the queue member. If the higher
weighted queue has fewer callers than available members, then there is no reason to deny
the call to this member since the other queue can afford to spare a member.
Since the fix involved writing a generic function for determining the number of available
members in the queue, I also modified the is_our_turn function to make use of the new
num_available_members function to determine if it is our turn to try calling a member. There
is one small behavior change. Before writing this patch, if you had autofill disabled, then
if you were the head caller in a queue, you would automatically be told that it was your
turn to try calling a member. This did not take into account whether there were actually any
queue members available to take the call. Now we actually make sure there is at least one
member available to take the call if autofill is disabled.
(closes issue #13220)
Reported by: garychen
Review: http://reviewboard.digium.com/r/202/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@185087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
................
r184986 | mmichelson | 2009-03-30 10:25:04 -0500 (Mon, 30 Mar 2009) | 27 lines
Blocked revisions 184980 via svnmerge
........
r184980 | mmichelson | 2009-03-30 10:23:59 -0500 (Mon, 30 Mar 2009) | 22 lines
Backport state interface changes to app_queue from trunk.
After several issues raised on the Asterisk bugtracker against
the 1.4 branch were determined to be fixable with the state interface
change available in the 1.6.X series, it finally came time to just
suck it up and backport the change.
For a detailed explanation of what this change entails, the original
trunk commit for this feature may be found here:
http://svn.digium.com/view/asterisk?view=revision&revision=97203
In addition, the details for the use of this change to fix the problems
stated in issue #12970 may be found in the review request I made for
this change. It is linked below.
(closes issue #12970)
Reported by: edugs15
Review: http://reviewboard.digium.com/r/116
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184948 | file | 2009-03-30 11:37:47 -0300 (Mon, 30 Mar 2009) | 21 lines
Merged revisions 184947 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184947 | file | 2009-03-30 11:35:47 -0300 (Mon, 30 Mar 2009) | 14 lines
Improve our handling of T38 in the initial INVITE from a device.
We now answer with matching media streams to what is requested. If an INVITE
is received with both a T38 and RTP media stream this means we answer with both.
For any outgoing calls created as a result of this inbound one no T38 is requested
in the initial INVITE. Instead if we start receiving udptl packets we trigger a
reinvite on the outbound side.
(closes issue #12437)
Reported by: marsosa
Tested by: pinga-fogo, okrief, file, afu
Review: http://reviewboard.digium.com/r/208/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184838 | russell | 2009-03-29 00:32:04 -0500 (Sun, 29 Mar 2009) | 8 lines
Simplify chan_h323 build to not require a second run of "make".
(closes issue #14715)
Reported by: jthurman
Patches:
h323-makefile-1.6.0.7-rc2.patch uploaded by jthurman (license 614)
h323-makefile-1.6.1.0-rc3.patch uploaded by jthurman (license 614)
h323-makefile-1.6.2.0-beta1.patch uploaded by jthurman (license 614)
Tested by: tzafrir, russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r184762 | kpfleming | 2009-03-27 14:10:32 -0500 (Fri, 27 Mar 2009) | 12 lines
Improve timing interface to remember which provider provided a timer
The ability to load/unload timing interfaces is nice, but it means that when a timer is allocated, it may come from provider A, but later provider B becomes the 'preferred' provider. If this happens, all timer API calls on the timer that was provided by provider A will actually be handed to provider B, which will say WTF and return an error.
This patch changes the timer API to include a pointer to the provider of the timer handle so that future operations on the timer will be forwarded to the proper provider.
(closes issue #14697)
Reported by: moy
Review: http://reviewboard.digium.com/r/211/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184763 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184673 | file | 2009-03-27 12:46:46 -0300 (Fri, 27 Mar 2009) | 7 lines
Fix speech structure leak in the AGI speech recognition integration.
The AGI dialplan applications did not destroy the speech structure automatically
if it was not destroyed by the running AGI script. They will now do this.
(issue LUMENVOX-15)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184566 | file | 2009-03-27 10:15:26 -0300 (Fri, 27 Mar 2009) | 16 lines
Merged revisions 184565 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184565 | file | 2009-03-27 10:06:45 -0300 (Fri, 27 Mar 2009) | 9 lines
Fix an issue where nat=yes would not always take effect for the RTP session on outgoing calls.
If calls were placed using an IP address or hostname the global nat setting was copied over
but was not set on the RTP session itself. This caused the RTP stack to not perform symmetric RTP
actions.
(closes issue #14546)
Reported by: acunningham
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184389 | dvossel | 2009-03-26 16:09:37 -0500 (Thu, 26 Mar 2009) | 14 lines
Merged revisions 184388 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184388 | dvossel | 2009-03-26 16:07:32 -0500 (Thu, 26 Mar 2009) | 8 lines
pri loop TestClient/TestServer fails: server SEND DTMF 8
app_test was failing when sending the last DTMF digit, 8, because of the 100ms pause issued after DTMF is sent. During this pause the other side would hang up causing the test to look like it failed. Now the other side waits a second before hanging up.
(closes issue #12442)
Reported by: tzafrir
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184280 | file | 2009-03-25 16:22:06 -0300 (Wed, 25 Mar 2009) | 5 lines
Fix issue with a T38 reinvite being sent even if not configured to do so.
If we receive a T38 request negotiate control frame we should only attempt to do so
if the option is enabled on the dialog.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184220 | eliel | 2009-03-25 10:38:19 -0400 (Wed, 25 Mar 2009) | 19 lines
Merged revisions 184188 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184188 | eliel | 2009-03-25 10:12:54 -0400 (Wed, 25 Mar 2009) | 13 lines
Avoid destroying the CLI line when moving the cursor backward and trying to autocomplete.
When moving the cursor backward and pressing TAB to autocomplete, a NULL is put
in the line and we are loosing what we have already wrote after the actual
cursor position.
(closes issue #14373)
Reported by: eliel
Patches:
asterisk.c.patch uploaded by eliel (license 64)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184079 | mmichelson | 2009-03-24 17:40:39 -0500 (Tue, 24 Mar 2009) | 15 lines
Merged revisions 184078 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184078 | mmichelson | 2009-03-24 17:34:45 -0500 (Tue, 24 Mar 2009) | 9 lines
Change NULL pointer check to be ast_strlen_zero.
The 'digit' variable is guaranteed to be non-NULL, so the if
statement could never evaluate true. Changing to ast_strlen_zero
makes the logic correct.
This was found while reviewing ast_channel_ao2 code review.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184037 | russell | 2009-03-24 16:40:44 -0500 (Tue, 24 Mar 2009) | 6 lines
Exclude slin16, siren7, and siren14 from bandwidth=low and =medium
The default codec configuration for chan_iax2 is bandwidth=low. I noticed
slin16 being negotiated as the codec in some test calls, but that no longer
happens after this change.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@184038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r183766 | mmichelson | 2009-03-23 13:58:03 -0500 (Mon, 23 Mar 2009) | 13 lines
Merged revisions 183700 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183700 | mmichelson | 2009-03-23 12:59:28 -0500 (Mon, 23 Mar 2009) | 7 lines
Fix a memory leak in res_monitor.c
The only way that this leak would occur is if Monitor were started
using the Manager interface and no File: header were given. Discovered
while reviewing the ast_channel_ao2 review request.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r183436 | dvossel | 2009-03-19 15:30:39 -0500 (Thu, 19 Mar 2009) | 13 lines
Merged revisions 183386 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183386 | dvossel | 2009-03-19 14:40:07 -0500 (Thu, 19 Mar 2009) | 6 lines
Cleaning up a few things in detect disconnect patch
Initialized ast_call_feature in detect_disconnect to avoid accessing uninitialized memory. Cleaned up /param tags in features.h. No longer send dynamic features in ast_feature_detect.
issue #11583
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r183244 | mmichelson | 2009-03-19 13:10:34 -0500 (Thu, 19 Mar 2009) | 16 lines
Fix a memory leak associated with queues.
For every attempt that app_queue made to place an outbound call to a queue member,
we would allocate a queue_end_bridge structure. When the bridge for the call had
completed, we would free the structure. Unfortunately not all call attempts actually
end up bridged to a member, so we need to be more selective of when to allocate
the structure. With this change, the allocation occurs in an area where we can
guarantee that the call will be bridged.
(closes issue #14680)
Reported by: caspy
Patches:
14680.patch uploaded by mmichelson (license 60)
Tested by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r183172 | dvossel | 2009-03-19 11:28:33 -0500 (Thu, 19 Mar 2009) | 20 lines
Merged revisions 183126 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183126 | dvossel | 2009-03-19 11:15:16 -0500 (Thu, 19 Mar 2009) | 17 lines
Allow disconnect feature before a call is bridged
feature.conf has a disconnect option. By default this option is set to '*', but it could be anything. If a user wishes to disconnect a call before the other side answers, only '*' will work, regardless if the disconnect option is set to something else. This is because features are unavailable until bridging takes place. The default disconnect option, '*', was hardcoded in app_dial, which doesn't make any sense from a user perspective since they may expect it to be something different. This patch allows features to be detected from outside of the bridge, but not operated on. In this case, the disconnect feature can be detected before briding and handled outside of features.c.
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
detect_disconnect.diff uploaded by dvossel (license 671)
Tested by: sobomax, dvossel
Review: http://reviewboard.digium.com/r/195/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r183117 | mmichelson | 2009-03-19 11:07:54 -0500 (Thu, 19 Mar 2009) | 20 lines
Merged revisions 183115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183115 | mmichelson | 2009-03-19 11:04:02 -0500 (Thu, 19 Mar 2009) | 14 lines
Fix an issue where cancelled outgoing SIP calls would erroneously report the device as "in use."
A user was having an issue where if an outgoing SIP call was canceled, the SIP device
would remain in use if we had not received any response to the initial INVITE we sent out.
The SIP device would remain in use until the autocongestion timer was exhausted.
I tracked down the cause of this to be the section of code I am removing here. I asked several
people what the purpose of this code was meant to be, but no one could give me any sort of
answer as to why this was here. The person who was having this issue has been using this patch
for several months and it has stopped the problems they have had.
AST-196
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r183108 | file | 2009-03-19 12:37:23 -0300 (Thu, 19 Mar 2009) | 11 lines
Improve our triggering of a T38 switchover internally when triggered by a received reinvite.
Previously we reached across the channel bridge to get the other party's SIP dialog
structure in order to trigger an outgoing reinvite. This is extremely dangerous to do
and only works if bridged to another SIP channel. This patch changes this to use the
T38 control frame method of requesting a switchover. This change also causes the SIP
channel driver to propogate back whether the switchover worked or not instead of blindly
accepting the incoming T38 reinvite.
Review: http://reviewboard.digium.com/r/200/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r183057 | file | 2009-03-18 19:22:56 -0300 (Wed, 18 Mar 2009) | 6 lines
Fix an issue where a T38 control frame would get dropped.
If two channels were bridged together using a generic bridge the T38
control frame would get passed up instead of being indicated on the
other channel.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@183066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182847 | russell | 2009-03-17 21:28:55 -0500 (Tue, 17 Mar 2009) | 52 lines
Merged revisions 182810 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182722 | jpeeler | 2009-03-17 15:47:31 -0500 (Tue, 17 Mar 2009) | 15 lines
Allow H.323 Plus library to be used in addition to the OpenH323 library
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182553 | russell | 2009-03-17 10:22:12 -0500 (Tue, 17 Mar 2009) | 5 lines
Tweak the handling of the frame list inside of ast_answer().
This does not change any behavior, but moves the frames from the local frame
list back to the channel read queue using an O(n) algorithm instead of O(n^2).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182525 | kpfleming | 2009-03-17 09:38:11 -0500 (Tue, 17 Mar 2009) | 11 lines
Improve behavior of ast_answer() to not lose incoming frames
ast_answer(), when supplied a delay before returning to the caller, use ast_safe_sleep() to implement the delay. Unfortunately during this time any incoming frames are discarded, which is problematic for T.38 re-INVITES and other sorts of channel operations.
When a delay is not passed to ast_answer(), it still delays for up to 500 milliseconds, waiting for media to arrive. Again, though, it discards any control frames, or non-voice media frames.
This patch rectifies this situation, by storing all incoming frames during the delay period on a list, and then requeuing them onto the channel before returning to the caller.
http://reviewboard.digium.com/r/196/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r182521 | seanbright | 2009-03-17 10:24:53 -0400 (Tue, 17 Mar 2009) | 3 lines
Don't include a space before the optional extra text that may follow a help
string.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182450 | tilghman | 2009-03-17 00:51:54 -0500 (Tue, 17 Mar 2009) | 14 lines
Merged revisions 182449 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182449 | tilghman | 2009-03-17 00:50:52 -0500 (Tue, 17 Mar 2009) | 7 lines
Fix race in astdb
The underlying db1 implementation does not fully isolate the pages retrieved
from astdb, so the lock protecting accesses needs to be extended until the
copy from the shared memory structure is done.
(closes issue #14682)
Reported by: makoto
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r182408 | rmudgett | 2009-03-16 20:54:53 -0500 (Mon, 16 Mar 2009) | 8 lines
OPENR2 uses an incorrect string value if the extension delimiter is not present.
* Fixed OPENR2 using an incorrect string value if the extension
delimiter is not present in the Dial() function. This was fixed for
SS7 and PRI in trunk -r172400.
* Made OPENR2 stripmsd behavior the same as the SS7, PRI, and others.
* Removed trailing whitespace that appeared with OPENR2.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r182355 | russell | 2009-03-16 15:35:58 -0500 (Mon, 16 Mar 2009) | 29 lines
Add MFC/R2 support for chan_dahdi.
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182282 | dvossel | 2009-03-16 12:49:58 -0500 (Mon, 16 Mar 2009) | 13 lines
Merged revisions 182281 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182281 | dvossel | 2009-03-16 12:47:42 -0500 (Mon, 16 Mar 2009) | 7 lines
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182278 | tilghman | 2009-03-16 12:33:38 -0500 (Mon, 16 Mar 2009) | 7 lines
Fix an off-by-one error in the FILE() function, and extend FILE()'s length parameter to work like variable substitution.
Previously, FILE() returned one less character than specified, due to the
terminating NULL. Both the offset and length parameters now behave
identically to the way variable substitution offsets and lengths also work.
(closes issue #14670)
Reported by: BMC
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182171 | file | 2009-03-16 10:58:24 -0300 (Mon, 16 Mar 2009) | 7 lines
Fix a memory leak in the ast_answer / __ast_answer API call.
For a channel that is not yet answered this API call will wait
until a voice frame is received on the channel before returning.
It does this by waiting for frames on the channel and reading them
in. The frames read in were not freed when they should have been.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
