If an ISDN call is hungup by both sides at the same time a crash could
happen.
* Added missing NULL checks for the owner channel after calling
pri_queue_pvt_cause_data() in two places. Code after those calls need to
check the owner channel pointer for NULL before use because
pri_queue_pvt_cause_data() needs to do deadlock avoidance to lock the
owner and the owner may get hung up.
ASTERISK-21893 #close
Reported by: Alexandr Gordeev
Change-Id: Ica3e266ebc7a894b41d762326f08653e1904bb9a
The code which reads asterisk.conf supports processing the debug
option with ast_true, but ast_true returns -1. This causes debug
to still be off, convert to 1 so debug will be on as requested.
ASTERISK-25042
Reported by: Corey Farrell
Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6
pbx_spool used to delete/move the call file upon successful outgoing
call completion, but did not delete it from in-memory list of files
(dirlist, used only when compiled with inotify/kqueue support).
That resulted in an extra attempt to process that filename after
retrytime seconds.
Then, if a new file with the same name appears that is scheduled
in future further than the completed one plus its retrytime,
then it gets executed earlier than expected.
This patch fixes remove_from_queue function to also remove the entry
from the dirlist.
ASTERISK-17069 #close
Reported by: Jeremy Kister
ASTERISK-24442 #close
Reported by: tootai
Change-Id: If9ec9b88073661ce485d6b008fd0b2612e49a28b
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
Added the necessary lines to the Makefile and sounds.xml so we'll have the
Swedish sounds in all available formats in menuselect.
See also: Swedish sounds were added into the core sounds release 1.4.27.
ASTERISK-24744 #close
Reported by: Tove Hjelm
Tested by: Rusty Newton
Change-Id: Ib6f4fd177afd1667b2402735034001d4d055a908
ERR_remove_state was deprecated with OpenSSL 1.0.0 and was replaced by
ERR_remove_thread_state. ERR_load_SSL_strings and ERR_load_BIO_strings were
called by SSL_load_error_strings already and got removed. These changes allow
OpenSSL forks like BoringSSL to be used with Asterisk.
ASTERISK-25043 #close
Reported by: Alexander Traud
patches:
asterisk_with_BoringSSL.patch uploaded by Alexander Traud (License 6520)
Change-Id: If1c0871ece21a7e0763fafbd2fa023ae49d4d629
(cherry picked from commit 247fef6653)
Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in
Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly. Updated clean
targets as well.
Updated /.gitignore and doc/.gitignore.
Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622
* Added a lookbehind to one-line comment matcher to skip escaped
semicolons.
* Added support for block comments.
Change-Id: Id17dfaeda8ed4be572e8107a0c010066584aaee7
This patch fixes EXITWITHTIMEOUT queue_log entry to always come with 3
parameters: position, original position and waiting time.
ASTERISK-25038 #close
Reported by: Etienne Lessard
Change-Id: I0c62045922e26bee2125e93aee1dee17eee79618
Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be re-established before the negative connection cache
time is met.
ASTERISK-22708 #close
Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which
checks compiler requirements for RAII:
gcc: -fnested-functions support
clang: -fblocks (and if required -lBlocksRuntime)
The original check was implemented in configure.ac and now has it's
own file. This function also sets C_COMPILER_FAMILY to either gcc or
clang for use by makefile
Created autoconf/ast_check_strsep_array_bounds.m4 (contains
AST_CHECK_STRSEP_ARRAY_BOUNDS):
which checks if clang is able to handle the optimized strsep & strcmp
functions (linux). If not, the standard libc implementation should be
used instead. Clang + the optimized macro's work with:
strsep(char *, char []), but not with strsepo(char *, char *).
Instead of replacing all the occurences throughout the source code,
not using the optimized macro version seemed easier
See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h':
llvm-comment: Normally, this array-bounds warning are suppressed for
macros, so that unused paths like the one that accesses __s1[3] are
not warned about. But if you preprocess manually, and feed the
result to another instance of clang, it will warn about all the
possible forks of this particular if statement. Instead of switching
of this optimization, another solution would be to run the preproces-
sing step with -frewrite-includes, which should preserve enough
information so that clang should still be able to suppress the diag-
nostic at the compile step later on.
See also "https://llvm.org/bugs/show_bug.cgi?id=20144"
See also "https://llvm.org/bugs/show_bug.cgi?id=11536"
Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning
suppressions:
-Wno-unused-value
-Wno-parentheses-equality
In an earlier review (reviewboard: 4550 and 4554), they were deemed a
nuisace and less than benefitial.
configure.ac:
Added AST_CHECK_RAII() see earlier
Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier
Removed moved content
ASTERISK-24917
Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb
(cherry picked from commit 9c3ed42875)
* Add AST_DEVMODE to BUILDOPTS
* Remove CFLAGS that do not effect ABI from BUILDOPTS.
* Use BUILDOPTS to generate AST_BUILDOPT_SUM.
* Remove loop that defined AST_MODULE_*
These changes ensure that only ABI effecting options are considered for
AST_BUILDOPT_SUM. This also reduces unneeded full system rebuilds caused
by enabling or disabling one module that another is dependent on.
ASTERISK-25028 #close
Reported by: Corey Farrell
Change-Id: I2c516d93df9f6aaa09ae079a8168c887a6ff93a2
The PBX core maintains two hash tables for hints: a container of the
actual hints (hints), along with a container of devices that are watching that
hint (hintdevices). When a dialplan reload occurs, each hint in the hints
container is destroyed; this requires a lookup in the container of devices to
find the device => hint mapping object. In the current code, this performs an
ao2_callback, iterating over each of the device to hint objects in the
hintdevices container. For a large number of hints, this is extremely
expensive: dialplan reloads with 20000 hints could take several minutes
in just this phase.
This patch improves the performance of this step in the dialplan reloads
by caching which devices are watching a hint on the hint object itself.
Since we don't want to create a circular reference, we just cache the
name of the device. This allows us to perform a smarter ao2_callback on
the hintdevices container during hint removal, hashing on the name of the
device and returning an iterator to the matching names. The overall
performance improvement is rather large, taking this step down to a number of
seconds as opposed to minutes.
In addition, this patch also registers the hint containers in the PBX
core with the astobj2 library. This allows for reasonable debugging to
hash collisions in those containers.
ASTERISK-25040 #close
Reported by: Matt Jordan
Change-Id: Iedfc97a69d21070c50fca42275d7b3e714e59360
(cherry picked from commit 80c0756f73)
Vectors are very useful constructs. As a container, they prevent having
to calloc/realloc arrays manually. They also have advantages over linked
lists, which require elements in the list to be a struct. This patch
backports vectors to Asterisk 11 for use in future patches.
Change-Id: Idc9d74d246a0158b0b36ccb250e7acc71bab078d
Some telco switches occasionally ignore ISDN RESTART requests. The fix
for ASTERISK-19608 added an escape clause for B channels in the restarting
state if the telco ignores a RESTART request. If the telco fails to
acknowledge the RESTART then Asterisk will assume the telco acknowledged
the RESTART on the second call attempt requesting the B channel by the
telco. The escape clause is good for dealing with RESTART requests in
general but it does cause the next call for the restarting B channel to be
rejected if the telco insists the call must go on that B channel.
chan_dahdi doesn't really need to issue a RESTART request in response to
receiving a cause 44 (Requested channel not available) code. Sending the
RESTART in such a situation is not required (nor prohibited) by the
standards. I think chan_dahdi does this for historical reasons to deal
with buggy peers to get channels unstuck in a similar fashion as the
chan_dahdi.conf resetinterval option.
* Add the chan_dahdi.conf force_restart_unavailable_chans compatability
option that when disabled will prevent chan_dahdi from trying to RESTART
the channel in response to a cause 44 code.
ASTERISK-25034 #close
Reported by: Richard Mudgett
Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65
This patch adds a new option to cdr.conf, 'newcdrcolumns', that will handle CDR
columns added in Asterisk 1.8. The columns are:
* peeraccount
* linkedid
* sequence
When enabled, the columns in the database entry will be populated with the data
from the CDR.
ASTERISK-24976 #close
Change-Id: I51a57063f4ae5e194a9d933a8df45dc8a4534f0b
The patch in 0b6410c4f8 did correctly fix a memory leak of the DTLS
structures in the RTP engine. However, when a 'core reload' is issued, a
double free of the memory pointed to by the char *'s in the DTLS
configuration struct can occur, as ast_rtp_dtls_cfg_free does not set
the pointers to NULL when they are freed.
This patch sets those pointers to NULL, preventing a second call to
ast_rtp_dtls_cfg_free from corrupting memory.
ASTERISK-25022
Change-Id: I820471e6070a37e3c26f760118c86770e12f6115
A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.
One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.
Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.
ASTERISK-24955 #close
Reported by: Matt Jordan
Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733
The doxygen for ast_rtp_codecs_payloads_copy() states:
"This copies the payloads from the codecs0 structure to the codecs1
structure, overwriting any current values."
However, in practice, the overwriting of current values was not
happening. Instead, a new RTP codec payload object would be appended to
the codecs1 structure instead of replacing the corresponding object.
This patch corrects this behavior by overwriting the object in the
codecs1 structure if it exists already. If it does not already exist,
then create a new copy and link it in.
Tests of "memory show summary rtp_engine.c" had previously shown
additional allocations being performed any time that Asterisk processed
an incoming SDP. Scenarios involving lots of reinvites resulted in lots
of allocations. With this patch, I can perform as many reinvites as
I want and see no memory increases from the RTP engine.
ASTERISK-24916 #close
Reported by Christophe Osuna
Change-Id: I9a90bc3f564535bc767bf2fc0c455d5f065cea75
The realtime API passes down the va_list argument to each RT engine in
failover chain until one succeeds. MySQL engine used to access the
variable argument list with va_arg, which mutates the va_list, so the
next engine in failover chain gets invalid agrument list.
This patch uses va_copy to preserve the original va_list argument intact.
ASTERISK-19538 #close
Reported by: alexat
Tested by: Ivan Poddubny
Change-Id: I7738b9f98bde81ddfbc2c0fa579d85a0c3e580ae
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
Add new column to INSERT new columns added in cdr 1.8 version. The columns are:
* peeraccount
* linkedid
* sequence
This feature is configurable in cdr_odbc.conf using a new configuration
option, 'newcdrcolumns'.
ASTERISK-24976 #close
Change-Id: Ibe0c7540a88305c6012786f438a0813ad8b19127
Confbridge dynamic profiles did not have a default profile unless you
explicitly used Set(CONFBRIDGE(bridge,template)=default_bridge). If a
template was not set prior to the bridge being created then some
options were left with no default values set. This patch makes it so
the default templates are set to the default bridge and user profiles.
ASTERISK-24749 #close
Reported by: philippebolduc
Change-Id: I1bd6e94b38701ac2112d842db68de63d46f60e0a
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefore deemed
unnecessary.
Example:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they do not
have to be *signed*. C leaves it up to the compiler as an implementation
option what to consider the integer type of a particular enumeration is.
Gcc treats an enum without negative values as an int while clang treats this
enum as an unsigned int.
rmudgett & mmichelson:
cast the enum to (unsigned int) in assert. The cast does have an effect.
For gcc, which seems to treat all enums as int, the cast to unsigned int
will eliminate the possibility of negative values being allowed. For
clang, which seems to treat enums without any negative members as
unsigned int, the cast will have no effect. If for some reason in the
future a negative value is ever added to the enum the assert will still
catch the negative value.
ASTERISK-24917
Change-Id: Ief23ef68916192b9b72dabe702b543ecfeca0b62
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefor deemed
unnecessary.
Exanple:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they
do not have to be *signed*. C leaves it up to the compiler as an
implementation option what to consider the integer type of a particu-
lar enumeration is. Gcc treats an enum without negative values as
an int while clang treats this enum as an unsigned int.
rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
The cast does have an effect. For gcc, which seems to treat all enums
as int, the cast to unsigned int will eliminate the possibility of
negative values being allowed. For clang, which seems to treat enums
without any negative members as unsigned int, the cast will have no
effect. If for some reason in the future a negative value is ever
added to the enum the assert will still catch the negative value.
ASTERISK-24917
Change-Id: I0557ae0154a0b7de68883848a609309cdf0aee6a
- When you need to refer to 'variable XXX' outside a block, it needs
to be declared as '__block XXX', otherwise it will not be available with-
in the block, making updating that variable hard to do, and ast_free
lead to issues.
- Removed the #error message
because it creates complications when compiling external projects
against asterisk For example when using a different compiler than the
one used to compile asterisk. The warning/error should be generated
during the configure process not the compilation process
ASTERISK-24917
Change-Id: I12091228090e90831bf2b498293858f46ea7a8c2
Fix a crash that could occur in __ast_channel_internal_alloc if
ao2_alloc fails.
ASTERISK-24991 #close
Change-Id: I4ca89189eb22f907408cb87d0a1645cfe1314a90
The chan_dahdi channel driver is a very old driver. The ability for it to
support ISDN was added well after the initial analog support. Setting the
softhangup flags is a carry over from the original analog code. The
driver was not updated to call ast_queue_hangup() which will post the AMI
HangupRequest event.
* Changed sig_pri.c to call ast_queue_hangup() instead of setting the
softhangup flag when the remote party initiates a hangup.
ASTERISK-24895 #close
Reported by: Andrew Zherdin
Change-Id: I5fe2e48556507785fd8ab8e1c960683fd5d20325
