Dynamic and pattern matching hints should not be checked for their last
known state until they are instantiated by subscribers.
(closes issue AFS-56)
Reported by: John Hardin
Patch AFS-56-pbx.diff submitted by Matt Jordan (license 6283)
........
Merged revisions 414813 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ODBC realtime driver uses ^NN parameter encoding to cope with the
special meaning of the semi-colon. A semi-colon in a field is
interpreted as if the key was supplied twice, something which isn't
otherwise possible with fixed database columns. E.g. allow=alaw;ulaw
is parsed as allow=alaw and allow=ulaw. A literal semi-colon is
rewritten to ^3B when stored in the database.
The module uses a stringfield to efficiently store the encoded
parameters. However, this stringfield wasn't always freed in some
off-nominal cases.
Commit r413241 fixed initialization so the encoding for INSERT and
DELETE queries wouldn't crash. (Only SELECTs and UPDATEs worked
apparently.) But that commit forgot the frees. This change cleans
that up.
Review: https://reviewboard.asterisk.org/r/3555/
........
Merged revisions 414564 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, when the last marked user leaves the conference, waitmarked
users don't get MOH if MOH is supposed to be played while a waitmarked
user is waiting for another marked user.
* Made not interrupt MOH when the user is a waitmarked user. The
waitmarked user doesn't need to hear any leave announcements from the
conference as the user would have already heard different leave
announcements if they were enabled. Apparently DAHDI occasionally sends
unending non-silent streams to these users or a normal user still in the
conference has continuous high background noise. These non-silent streams
cause MOH to be suspended while the never ending "announcement" is played.
Issue caused by ASTERISK-13680.
AST-1349 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3543/
........
Merged revisions 414401 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting a conference recording using the admin menu overwrites the DAHDI
conference data structure used to modify the admin user's conference mute
mode.
* Made no longer pass the user's DAHDI conference data structure into the
menu functions. The menu now uses its own DAHDI conference data
structure to start the recording channel.
* Moved the unlock conf->playlock to before playing the conf-full message.
No sense keeping the lock while that prompt is playing. The user is never
going to get into the conference at that point.
........
Merged revisions 413991 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
> Apparently this was already fixed in Asterisk 11.
> https://reviewboard.asterisk.org/r/1944/ (r368519, 2012-06-05 16:41:43 +0200)
........
chan_local+app_dial: Propagagate call answered elsewhere over local channels.
AST_FLAG_ANSWERED_ELSEWHERE was not propagated back from local channels.
It is now. That means that when a call is picked up from a callgroup of
local channels, the other channels will now properly see it as "picked up".
This occurs when you use a construct like Dial(Local/a@context&Local/b@context)
where a@context and b@context dial two chan_sip devices respectively. If one
device picks up, the other will not see "1 missed call" anymore. In this
respect, it now behaves the same as when doing Dial(SIP/a&SIP/b).
Review: https://reviewboard.asterisk.org/r/3540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the barge audiohook was attached prior to the spyee and its peer
actually being bridged, the audiohook would not be applied and the
connected peer would not be able to hear audio from the spy when the
spy is in barge mode.
(closes issue ASTERISK-23381)
Reported by: Robert Moss
Review: https://reviewboard.asterisk.org/r/3505/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The realtime API specifies that the store callback is supposed to return the number
of rows affected. res_config_pgsql was instead returning an Oid cast as an int, which
during any nominal execution would be cast to 0. Returning 0 when more than 0 rows were
inserted causes problems to the function's callers.
To give an idea of how strange code can be, this is the necessary code change to fix
a device state issue reported against chan_pjsip in Asterisk 12+. The issue was that
the registrar would attempt to insert contacts into the database. Because of the 0
return from res_config_pgsql, the registrar would think that the contact was not successfully
inserted, even though it actually was. As such, even though the contact was query-able
and it was possible to call the endpoint, Asterisk would "think" the endpoint was unregistered,
meaning it would report the device state as UNAVAILABLE instead of NOT_INUSE.
The necessary fix applies to all versions of Asterisk, so even though the bug reported
only applies to Asterisk 12+, the code correction is being inserted into 1.8+.
Closes issue ASTERISK-23707
Reported by Mark Michelson
........
Merged revisions 413224 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413225 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves a race condition where data could be written to a NULL
FILE pointer causing a crash as a websocket connection was in the
process of shutting down by adding locking to websocket session writes
and by deferring session teardown until session destruction.
(closes issue ASTERISK-23605)
Review: https://reviewboard.asterisk.org/r/3481/
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413123 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On congested networks, it is possible for the DTLS handshake messages to get
lost. This patch adds a timer to res_rtp_asterisk that will periodically
check to see if the handshake has succeeded. If not, it will retransmit the
DTLS handshake.
Review: https://reviewboard.asterisk.org/r/3337
ASTERISK-23649 #close
Reported by: Nitesh Bansal
patches:
dtls_retransmission.patch uploaded by Nitesh Bansal (License 6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backport -r411687 and fix the fix because content_length is the length of
out plus the length of the file controlled by fd.
When a response has an out content length of 0, fwrite would be called to
write a buffer with no data in it. This resulted in the following classic
error message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write the content of out if
the out string is non-zero.
........
Merged revisions 412922 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the TCP_NODELAY option to accepted connections on the HTTP
server built into Asterisk. This option disables the Nagle algorithm
which controls queueing of outbound data and in some cases can cause
delays on receipt of response by the client due to how the Nagle
algorithm interacts with TCP delayed ACK. This option is already set on
all non-HTTP AMI connections and this change would cover standard HTTP
requests, manager HTTP connections, and ARI HTTP requests and
websockets in Asterisk 12+ along with any future use of the HTTP
server.
Review: https://reviewboard.asterisk.org/r/3466/
........
Merged revisions 412745 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues in app_sms:
(1) Firstly, the 'flags' field on the stack in sms_exec() is uninitialised,
causing it to use the wrong protocol in some cases. This patch correctly
initializes the flags fields.
(2) Secondly, when disconnect supervision is not working or
inbanddisconnect=yes is set in chan_dahdi.conf, app_sms was failing to
terminate the call after it sent the REL(ease) message and the peer stopped
talking to it. This patch fixes the code to handle the 'bad stop bit'
message more gracefully in that case, and hang up the call.
Review: https://reviewboard.asterisk.org/r/1392/
ASTERISK-18331 #close
Reported by: David Woodhouse
patches:
asterisk-fix-sms.patch uploaded by David Woodhouse (License 5754)
........
Merged revisions 412655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In sounds/Makefile
1 Adds and moves some lines necessary for the en_GB core set. I'm just following how the other sets are defined here.
2 removes the ES extra sounds related lines as we don't have ES extra sound sets.
In sounds/sounds.xml
3 Adds member definitons for EN_AU, EN_GB, IT for core sound sets, and EN_GB in extra sound sets
ASTERISK-23550 #close
Review: https://reviewboard.asterisk.org/r/3464/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
channels/chan_oss: Fix compilation problem on SmartOS/Illumos/SunOS
THis patch fixes an issue in chan_oss when building on certain platforms. It
ensures that soundcard.h is found.
Review: https://reviewboard.asterisk.org/r/3426
Note that this patch is a part of the patch on ASTERISK-23576; the Makefile
portion only applies to Asterisk 11+.
(issue ASTERISK-23576)
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues when building on SmartOS:
- channels/chan_oss.c: it makes sure soundcard.h is found
- main/Makefile: only use "-Wl,--version-script" when GNU LD is used as the Sun
Linker doesn't support that. Similar checks are already used elswhere in the
Makefile
Review: https://reviewboard.asterisk.org/r/3426
ASTERISK-23576 #close
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Moved sip_pvt unref in ast_hangup() and handle_request_do() to the end
of the function. The unref needs to happen after the last use of the
pointer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
autoservice acquires a local reference to the logger callid of each channel
in a loop. This local reference was not released, causing the callid of
every channel in autoservice to leak. This change moves the callid unref
inside the loop.
ASTERISK-23616 #close
Reported by: ibercom
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
