* Fix crash in ast_channel_hangupcause_set() because p->owner not checked
before calling. Regression introduced by the fix for ASTERISK-22621.
(closes issue ASTERISK-23135)
Reported by: OK
(issue ASTERISK-23323)
Reported by: Walter Doekes
........
Merged revisions 409156 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, local candidate lists including SRFLX would fail to start
properly when building ICE candidate check lists. This patch fixes that problem
by making sure that each SRFLX candidate is associated with the proper
base address so that the check list can create matches properly.
This patch was written by jcolp. The issue will be left open to await testing
by the issue participants.
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409129 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This memset complained in dev mod on my Ubuntu box. The memset is both
unnecessary and dangerous. At this point, m hasn't been initialized
yet, so the memset will write off to whatever address happens to be
on the stack at the time.
........
Merged revisions 409077 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change minrate from 2400 to 4800 on config reload in response to changes from
ASTERISK-22790 only. Any config with minrate of 2400 that would fail before
r405693 will still fail.
Comment out many settings in res_fax.conf.sample. The defaults are set in
res_fax.c, so setting the same value in sample config does nothing but make
the sample config more fragile.
(closes issue ASTERISK-23231)
Reported by: David Brillert
Review: https://reviewboard.asterisk.org/r/3261/
........
Merged revisions 409052 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When two RTP channels are in a remote bridge, the remote bridging loop in
rtp_engine will periodically check to see if the two channels can still be
bridged. One of the many things it checks is whether or not the codecs have
changed on the channel. If the codec has changed, it will break out of the
loop to re-determine which type of bridge is appropriate.
In order to perform this check, the ast_rtp_glue virtual table's get_codec
callback is called for each channel. The callback implementations assume
that the channel tech private is valid when called; as such, there has
always been some code in place to check whether or not the channel pvt is
NULL before calling. However, this check is insufficient.
The channels are unlocked during the remote bridging loop. It is possible
for a channel to get masqueraded between the check for the pvt being NULL and
the actual call to get_codec. When this occurs, the callback is called with a
ZOMBIE channel, which now has a NULL pvt. Crash.
While this has always been possible in Asterisk 1.8, it is much more likely to
occur in Asterisk 11 and later versions due to the timing changes that occur
when getting the codec from a channel. Note that this is much more likely to be
reproduced on slow, boggy hardware running Asterisk 11 - but fairly rarely
otherwise.
Also Note: This crash was also caught by the various SIP blind transfer tests,
in addition to the bug report Alec filed.
Review: https://reviewboard.asterisk.org/r/3247/
(closes issue ASTERISK-21737)
Reported by: Alec Davis
Tested by: Alec Davis
........
Merged revisions 409001 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409002 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the 'v' option is specified to ForkCDR application, AST_CDR_FLAG_KEEP_VARS
flag is set only for the first CDR in the chain. So ForkCDR works fine with this
option only once. After the second and further calls to ForkCDR, CDR variables
get cleared on all CDRs besides the first one and moved to the newly forked CDR.
It always sets the KEEP_VARS flag on the first CDR in the chain, instead of the
most recent CDR which is used as a base to fork a new CDR.
This patch sets KEEP_VARS flag on the most recent CDR on the stack (the CDR used
for forking).
(closes issue ASTERISK-23260)
Reported by: zvision
Patches:
app_forkcdr.diff uploaded by zvision (license 5755)
........
Merged revisions 408747 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk didn't support the dynamic payload change in rtp mapping in the 200
OK response.
Scenario:
Asterisk sends the INVITE proposing alaw and telephone-event, it proposes
rtpmap:101 for telephone-event. Peer responds with 2xx, it answers with
alaw and telephone-event also, but it proposes a different rtpmap number
(rtpmap:103) for telephone-event.
Expected Behaviour:
Asterisk should honour the rtpmapping in the response and send DTMF packets
using 103 as payload type for DTMF.
Actual Behaviour: Asterisk sends DTMF packets using payload type 101.
With this patch asterisk now supports changes that can occur in the rtp mapping
in the response.
(closes issue ASTERISK-23279)
Reported by: NITESH BANSAL
Review: https://reviewboard.asterisk.org/r/3225/
Patches:
dynamic_payload_change.patch uploaded by nbansal (license 6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the code to check to see if MOH is playing on the transferor and if
so then start it on the channel that replaces it during a masquerade.
Example scenario of the problem:
Alice calls Bob and then Bob begins the attended transfer process into a queue.
Upon going on hold Alice hears music and so does Bob once he is in the queue.
Bob then transfers Alice into the queue and then music for Alice stops even
though she should be hearing it since has now replaced Bob in the queue.
The problem that was occurring is that once the channel was masqueraded the app
(queues, confbridge, etc...) had no way of knowing that the channel had just
been swapped out thus it did not start music for the present channel.
Credit to Olle Johansson for pointing me in the right direction on this issue.
(closes issue ASTERISK-19499)
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/3226/
........
Merged revisions 408642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the "x" option (specify a DTMF digit to exit the application), it is
not obvious in the documentation that this only works when spying on a channel.
If a channel being used to spy on other channels is waiting to connect to a
channel or is no longer attached to a channel, the DTMF is ignored.
As noted on the issue tracker, since there are workarounds available and this is
a rarely used option we are opting for a documentation change here.
(closes issue ASTERISK-22661)
Reported by: Chris Hillman
Patches:
asterisk-22661-doc-clarify-chan_spy.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2990/
........
Merged revisions 408536 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Repeatedly modifying config files and reloading too fast sometimes fails
to reload the configuration because the cached modification timestamp has
one second resolution.
* Added file size and nanosecond resolution fields to the cached config
file modification timestamp information. Now if the file size changes or
the file system supports nanosecond resolution the modified file has a
better chance of being detected for reload.
* Added a missing unlock in an off-nominal code path.
(closes issue AST-1303)
Review: https://reviewboard.asterisk.org/r/3235/
........
Merged revisions 408387 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is highly unlikely, but - at least in Asterisk 12 - theoretically possible
to load Asterisk with no dialplan whatsoever. If that occurs, and some other
module (that is not a pbx module) attempts to merge its contexts into the
dialplan, the existing merge routine will crash. This is because it is not
insane, and rightly believes that you provided some sort of dialplan,
somewhere.
This patch will gracefully merge the contexts in such a case. Note that this
is highly unlikely to occur in 1.8/11, as features will most likely provide
some dialplan via parking. However, in Asterisk 12, parking is now provided
by res_parking, and hence may create its dialplan later.
(closes issue ASTERISK-23297)
Reported by: CJ Oster
Review: https://reviewboard.asterisk.org/r/3222
........
Merged revisions 408200 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_format_sdp_parse and ast_format_sdp_generate
the check checks for a valid interface and function
were potentially confusing, and hid an error in the
test of the presence of the function that is called
later. This patch clears up and corrects the test.
Review: https://reviewboard.asterisk.org/r/3208/
(closes issue ASTERISK-23098)
Reported by: marcelloceschia
Patches:
main_format.patch uploaded by marcelloceschia (license 6036)
ASTERISK-23098.patch uploaded by coreyfarrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when the first marked user enters the conference that
contains waitmarked users, a prompt is played indicating that the user
is being placed into the conference. Unfortunately, this prompt is
played to the marked user and not the waitmarked users which is not
very helpful.
This patch changes that behavior to play a prompt stating
"The conference will now begin" to the entire conference after adding
and unmuting the waitmarked users since the design of confbridge is not
conducive to playing a prompt to a subset of users in a conference in
an asynchronous manner.
(closes issue PQ-1396)
Review: https://reviewboard.asterisk.org/r/3155/
Reported by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a DAHDI device is removed at run-time it sends the event
DAHDI_EVENT_REMOVED on each channel. This is intended to signal the
userspace program to close the respective file handle, as the driver of
the device will need all of them closed to properly clean-up.
This event has long since been handled in chan_dahdi (chan_zap at the
time). However the event that is sent on a D-Channel of a "PRI" (ISDN)
span simply gets ignored.
This commit adds handling for closing the file descriptor (and shutting
down the span, while we're at it).
It also adds a CLI command 'pri destroy span <N>' to destroy the span
and its DAHDI channels.
Backported from trunk/12.
Review: https://reviewboard.asterisk.org/r/726/
........
Merged revisions 394552 394567 from http://svn.asterisk.org/svn/asterisk/trunk
........
Merged revisions 407817 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes path handling for log files so that an extra / is not
appended to the file path when the path is absolute (begins with /).
This would previously result in different but functionally equivalent
paths in the output of 'logger show channels'.
........
Merged revisions 407455 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thanks to Guillaume Martres for doing the necessary research to validate
the change.
(closes issue ASTERISK-17727)
Reported by: LN
Patches:
use_certificate_chain.patch (license #5864) patch uploaded by st
documente_certificate_chain.patch (license #6576) patch uploaded by Guillaume Martres
........
Merged revisions 407272 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code assumed that unregistering the alias would always succeed while in
practice this is not actually true. A common case is the "reload" command itself.
If the cli_aliases.conf configuration file was changed and reload executed the
command would fail to unregister and ultimately point to freed memory.
The reload process now checks whether unregistering succeeded or not and if not
the old CLI alias is retained.
(closes issue ASTERISK-19773)
Reported by: Joel Vandal
(closes issue ASTERISK-22757)
Reported by: Gareth Blades
........
Merged revisions 407205 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
STACK_PEEK requires 2 parameters and LOCAL_PEEK requires 1 parameter. This
protects against situations where those parameters are blank or missing by
logging an error and returning.
(closes issue ASTERISK-23220)
Reported by: James Sharp
........
Merged revisions 407100 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The parsing for the destination of the macro/gosub uses the '^' character to
separate out context, extension, and priority. However, the logic for the
macro/gosub execution was written such that it would only do the actual
macro/gosub jump if a '^' character existed. This doesn't apply when the
macro/gosub jump occurs in a priority/priority label. This patch changes
the logic so that the parsing still occurs, but the jump will occur even
for priorities/priority labels.
(issue ASTERISK-23164)
Review: https://reviewboard.asterisk.org/r/3154
........
Merged revisions 407041 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_bind to a port reserved for another program by SELinux causes
errno == EACCES. This caused random failures when binding rtp or
udptl sockets. Treat EACCES as a non-fatal error, try next port.
(closes issue ASTERISK-23134)
Reported by: Corey Farrell
........
Merged revisions 406933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's RADIUS module currently build against libradiusclient-ng, but this
project has been superseeded by libfreeradius-client. The API is 99% compatible
except that the header name has changed, the library name has changed, and
the configuration file location has changed.
(closes issue ASTERISK-22980)
Reported by: Jeremy Lainé
Patches:
freeradius-client.patch uploaded by sharky (license 6561)
........
Merged revisions 406801 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_instance_make_compatible(), after a failure of
channel tech call get_rtp_info() to return peer_instance,
the null pointer would be passed to ao2_ref, producing an
error that looked like a refernce counting problem but is
not. This patch corrects that and adds helpful LOG_ERROR
messages to indicate which failure path occurred.
(issue AST-1276)
Review: https://reviewboard.asterisk.org/r/3156/
........
Merged revisions 406721 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
extconfig.conf was hard-coded to not allow nested includes for some reason.
The code has been this way since a patch was merged for ASTERISK-3333 (revision
4889), which was a significant update to this code ("Merge config updates").
I can't figure out any good reason why this should be limited. This patch just
removes the limit and uses the default nesting depth limit.
Closes issue ASTERISK-17837
Review: https://reviewboard.asterisk.org/r/3159/
........
Merged revisions 406643 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_filestream object gets tacked on to a channel via
chan->timingdata. It's a reference counted object, but the reference
count isn't used when putting it on a channel. It's theoretically
possible for another thread to interfere with the channel while it's
unlocked and cause the filestream to get destroyed.
Use the astobj2 reference count to make sure that as long as this code
path is holding on the ast_filestream and passing it into the file.c
playback code, that it knows it's valid.
Bug reported by Leif Madsen.
Review: https://reviewboard.asterisk.org/r/3135/
........
Merged revisions 406566 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL data structures need to be protected during a configuration reload
and shutdown. Asterisk crashed during a shutdown because CEL events were
still in flight and the CEL data structures were already destroyed.
* Protected the appset and linkedids ao2 containers using the reload_lock.
As a result appset, linkedids, and held objects don't need a lock.
* Added NULL checks before use of the appset and linkedids ao2 containers
in case the CEL module is already shutdown.
* Fixed overloading of the linkedids held objects reference count. During
shutdown any held objects would be leaked.
* Fixed memory leak of linkedids held objects if the LINKEDID_END is not
being tracked. The objects in the linkedids container were not removed if
the LINKEDID_END event is not used.
* Added access protection to the appset container during the CLI "cel show
status" command.
* Made CEL config reload not set defaults if the cel.conf file is invalid.
(closes issue AST-1253)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3127/
........
Merged revisions 406417 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made register atexit shutdown routine only once in __init_manager().
* Fixed some initial load failure conditions in __init_manager().
* Made reset options to defaults on reload when the reload will actually
happen.
* Removed unnecessary container traversals of the white/black filters
during manager_free_user().
* ast_free() does not need a NULL check before calling.
........
Merged revisions 406359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
