........
r187560 | mmichelson | 2009-04-09 16:06:26 -0500 (Thu, 09 Apr 2009) | 11 lines
Add a new option, mwi_from, to sip.conf.
This allows for you to change the From header for outgoing MWI
NOTIFY requests. Prior to this, the best you could do was to
set a callerid in the general section of sip.conf. The problem
was that this was used for all outbound requests, not just
MWI NOTIFY requests.
AST-201
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187562 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r187488 | mmichelson | 2009-04-09 13:58:41 -0500 (Thu, 09 Apr 2009) | 24 lines
Merged revisions 187484 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r187484 | mmichelson | 2009-04-09 13:51:20 -0500 (Thu, 09 Apr 2009) | 18 lines
Handle a SIP race condition (reinvite before an ACK) properly.
RFC 5047 explains the proper course of action to take if a
reINVITE is received before the ACK from a previous invite
transaction. What we are to do is to treat the reINVITE as
if it were both an ACK and a reINVITE and process it normally.
Later, when we receive the ACK we had been expecting, we will
ignore it since its CSeq is less than the current iseqno of
the sip_pvt representing this dialog.
(closes issue #13849)
Reported by: klaus3000
Patches:
13849_v2.patch uploaded by mmichelson (license 60)
Tested by: mmichelson, klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r187491 | jpeeler | 2009-04-09 14:10:02 -0500 (Thu, 09 Apr 2009) | 15 lines
Add ability for dialplan execution to continue when caller hangs up.
The F option to app_dial has been modified to accept no parameters and perform
the above functionality. I don't see anywhere else that is doing function
overloading, but this really is the best place for this operation because:
- It makes it close to the 'g' option in the argument list which provides
similar functionality.
- The existing code to support the current F option provides a very
convienient location to add this new feature.
(closes issue #12381)
Reported by: michael-fig
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r187421 | mmichelson | 2009-04-09 12:30:39 -0500 (Thu, 09 Apr 2009) | 21 lines
Fix a crash in res_musiconhold when using cached realtime moh.
The moh_register function links an mohclass and then immediately
unrefs the class since the container now has a reference. The problem
with using realtime music on hold is that the class is allocated,
registered, and started in one fell swoop. The refcounting logic
resulted in the count being off by one. The same problem did not
happen when using a static config because the allocation and registration
of an mohclass is a separate operation from starting moh. This also did
not affect non-cached realtime moh because the classes are not registered
at all.
I also have modified res_musiconhold to use the _t_ variants of the ao2_
functions so that more info can be gleaned when attempting to trace the
refcounts. I found this to be incredibly helpful for debugging this issue
and there's no good reason to remove it.
(closes issue #14661)
Reported by: sum
........
r187424 | mmichelson | 2009-04-09 12:34:39 -0500 (Thu, 09 Apr 2009) | 3 lines
Use safe macro practices even though they really aren't necessary.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r187269 | kpfleming | 2009-04-08 22:44:27 -0400 (Wed, 08 Apr 2009) | 5 lines
add a dedicated log channel for modules to be able report security-related events, so that they can be fed into external processes for analysis and possible mitigation efforts
(inspired by this evening's Toronto Asterisk Users Group meeting and previous dicussions amongst various community members)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r187211 | jpeeler | 2009-04-08 16:00:39 -0500 (Wed, 08 Apr 2009) | 20 lines
Add timer for features so that backup bridge config can go away
The biggest change done here was elimination of the backup_config for use with
features. Previously, the bridging code upon detecting a feature would set the
start time of the bridge to the start time of the feature. Then after the
feature had either expired or timed out the start time would be reset to the
true bridge start time from the backup_config. Now, the time differences are
calculated with respect to the newly added feature_start_time timeval instead.
There should be no behavior changes from the previous functionality aside from
the bridge timing being unaffected by either valid or partial feature matches.
Previously the timing would be increased by the length of time configured for
featuredigittimeout, which was probably never noticed.
(closes issue #14503)
Reported by: KNK
Tested by: jpeeler
Review: http://reviewboard.digium.com/r/179/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r187046 | mmichelson | 2009-04-08 11:52:20 -0500 (Wed, 08 Apr 2009) | 16 lines
Merged revisions 187045 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r187045 | mmichelson | 2009-04-08 11:52:03 -0500 (Wed, 08 Apr 2009) | 10 lines
Fix a small logical error when loading moh classes.
We were unconditionally incrementing the number of mohclasses
registered. However, we should actually only increment if the
call to moh_register was successful.
While this probably has never caused problems, I noticed it
and decided to fix it anyway.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r186985 | mmichelson | 2009-04-08 10:27:41 -0500 (Wed, 08 Apr 2009) | 30 lines
Merged revisions 186984 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186984 | mmichelson | 2009-04-08 10:26:46 -0500 (Wed, 08 Apr 2009) | 24 lines
Make a couple of changes with regards to a new message printed in ast_read().
"ast_read() called with no recorded file descriptor" is a new message added
after a bug was discovered. Unfortunately, it seems there are a bunch of places
that potentially make such calls to ast_read() and trigger this error message
to be displayed. This commit does two things to help to make this message appear
less.
First, the message has been downgraded to a debug level message if dev mode is
not enabled. The message means a lot more to developers than it does to end users,
and so developers should take an effort to be sure to call ast_read only when
a channel is ready to be read from. However, since this doesn't actually cause an
error in operation and is not something a user can easily fix, we should not spam
their console with these messages.
Second, the message has been moved to after the check for any pending masquerades.
ast_read() being called with no recorded file descriptor should not interfere with
a masquerade taking place.
This could be seen as a simple way of resolving issue #14723. However, I still want
to try to clear out the existing ways of triggering this message, since I feel that
would be a better resolution for the issue.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r186833 | mmichelson | 2009-04-07 18:50:56 -0500 (Tue, 07 Apr 2009) | 15 lines
Merged revisions 186832 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186832 | mmichelson | 2009-04-07 18:49:49 -0500 (Tue, 07 Apr 2009) | 8 lines
Set the AST_FEATURE_WARNING_ACTIVE flag when a p2p bridge returns AST_BRIDGE_RETRY.
Without this flag set, warning sounds will not be properly played to either party
of the bridge.
(closes issue #14845)
Reported by: adomjan
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186835 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r186620 | mmichelson | 2009-04-06 11:06:25 -0500 (Mon, 06 Apr 2009) | 3 lines
Silly svn. These files didn't get merged over in the merge of the issue8824 branch.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r186525 | mmichelson | 2009-04-03 17:41:46 -0500 (Fri, 03 Apr 2009) | 22 lines
This commit introduces COLP/CONP and Redirecting party information into Asterisk.
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r186461 | kpfleming | 2009-04-03 15:20:01 -0500 (Fri, 03 Apr 2009) | 11 lines
Merged revisions 186458 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186458 | kpfleming | 2009-04-03 15:19:20 -0500 (Fri, 03 Apr 2009) | 5 lines
Fix a bug where DAHDI/Zaptel channels would not properly switch formats when requested
Don't offer AST_FORMAT_SLINEAR on DAHDI/Zaptel channels... while it could provide a slight performance benefit, the translation core in Asterisk has some flaws when a channel driver offers multiple raw formats. this fix is much simpler than fixing the translation core to solve that issue (although that will be done later).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r186379 | dvossel | 2009-04-03 11:29:47 -0500 (Fri, 03 Apr 2009) | 4 lines
audio_audiohook_write_list() did not correctly update sample size after ast_translate.
audio_audiohook_write_list() did not take into account that the sample size may change after translation depending on if the original frame is is 8khz or 16khz. the sample size is now updated after translating to reflect this possibility. This caused the audio on the receiving end to sound terrible. Thanks to jcolp and mmichelson for helping me work this out.
(issue AST-197)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r186286 | mmichelson | 2009-04-03 09:32:05 -0500 (Fri, 03 Apr 2009) | 20 lines
Fix the ability to retrieve voicemail messages from IMAP.
A recent change made interactive vm_states no longer get
added to the list of vm_states and instead get stored in
thread-local storage.
In trunk and all the 1.6.X branches, the problem is that
when we search for messages in a voicemail box, we would
attempt to update the appropriate vm_state struct by directly
searching in the list of vm_states instead of using the
get_vm_state_by_imap_user function. This meant we could not
find the interactive vm_state that we wanted.
(closes issue #14685)
Reported by: BlargMaN
Patches:
14685.patch uploaded by mmichelson (license 60)
Tested by: BlargMaN, qualleyiv, mmichelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r186230 | russell | 2009-04-02 21:03:48 -0500 (Thu, 02 Apr 2009) | 29 lines
Merged revisions 186229 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186229 | russell | 2009-04-02 20:57:44 -0500 (Thu, 02 Apr 2009) | 21 lines
Fix a memory leak in cdr_radius.
I came across this while doing some testing of my ast_channel_ao2 branch.
After running a test overnight that generated over 5 million calls, Asterisk
had taken up about 1 GB of my system memory. So, I re-ran the test with
MALLOC_DEBUG turned on. However, it showed no leaks in Asterisk during the
test, even though Asterisk was still consuming it somehow.
Instead, I turned to valgrind, which when run with --leak-check=full, told
me exactly where the leak came from, which was from allocations inside the
radiusclient-ng library. This explains why MALLOC_DEBUG did not report it.
After a bit of analysis, I found that we were leaking a little bit of memory
every time a CDR record was passed to cdr_radius.
I don't actually have a radius server set up to receive CDR records. However,
I always have my development systems compile and install all modules. In
addition to making sure there are not build errors across modules, always
loading modules helps find bugs like this, too, so it is strongly recommend for
all developers.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185953 | kpfleming | 2009-04-02 08:51:44 -0500 (Thu, 02 Apr 2009) | 11 lines
Merged revisions 185952 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185952 | kpfleming | 2009-04-02 08:43:43 -0500 (Thu, 02 Apr 2009) | 5 lines
the DAHDI_GETCONF, DAHDI_SETCONF and DAHDI_GET_PARAMS ioctls were recently corrected to show that they do, in fact, read data from userspace as part of their work. due to this fix, valgrind now reports a number of cases where chan_dahdi passed an uninitialized (or partially) buffer to these ioctls, which could lead to unexpected behavior.
this patch corrects chan_dahdi to ensure that buffers passed to these ioctls are always fully initialized.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185846 | dvossel | 2009-04-01 14:03:32 -0500 (Wed, 01 Apr 2009) | 16 lines
Merged revisions 185845 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185845 | dvossel | 2009-04-01 14:02:00 -0500 (Wed, 01 Apr 2009) | 10 lines
Fixes issue with dropped calles due to re-Invite glare and re-Invites never executing after a 491
Acknowledgement for 491 responses were never being processed because it didn't match our pending invite's seqno. Since the ACK was never processed, the 491 frame would continue to be retransmitted until eventually the call was dropped due to max retries. Now during a pending invite, if we receive another invite, we send an 491 and hold on to that glare invite's seqno in the "glareinvite" variable for that sip_pvt struct. When ACK's are received, we first check to see if it is in response to our pending invite, if not we check to see if it is in response to a glare invite. In this case, it is in response to the glare invite and must be dealt with or the call is dropped. I've changed the wait time for resending the re-Invite after receving a 491 response to comply with RFC 3261. Before this patch the scheduled re-Invite would only change a flag indicating that the re-Invite should be sent out, now it actually sends it out as well.
(closes issue #12013)
Reported by: alx
Review: http://reviewboard.digium.com/r/213/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185772 | russell | 2009-04-01 08:48:26 -0500 (Wed, 01 Apr 2009) | 14 lines
Merged revisions 185771 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185771 | russell | 2009-04-01 08:47:30 -0500 (Wed, 01 Apr 2009) | 6 lines
Fix a case where DTMF could bypass audiohooks.
This change fixes a situation where an audiohook that wants DTMF would not
actually get it. This is in the code path where we end DTMF digit length
emulation while handling a NULL frame.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r185581 | kpfleming | 2009-03-31 16:29:50 -0500 (Tue, 31 Mar 2009) | 19 lines
Optimizations to the stringfields API
This patch provides a number of optimizations to the stringfields API, focused around saving (not wasting) memory whenever possible. Thanks to Mark Michelson for inspiring this work and coming up with the first two optimizations that are represented here:
Changes:
- Cleanup of some code, fix incorrect doxygen comments
- When a field is emptied or replaced with a new allocation, decrease the amount of 'active' space in the pool it was held in; if that pool reaches zero active space, and is not the current pool, then free it as it is no longer in use
- When allocating a pool, try to allocate a size that will fit in a 'standard' malloc() allocation without wasting space
- When allocating space for a field, store the amount of space in the two bytes immediately preceding the field; this eliminates the need to call strlen() on the field when overwriting it, and more importantly it 'remembers' the amount of space the field has available, even if a shorter string has been stored in it since it was allocated
- Don't automatically double the size of each successive pool allocated; it's wasteful
http://reviewboard.digium.com/r/165/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185363 | dbrooks | 2009-03-31 11:46:57 -0500 (Tue, 31 Mar 2009) | 44 lines
Merged revisions 185362 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185362 | dbrooks | 2009-03-31 11:37:12 -0500 (Tue, 31 Mar 2009) | 35 lines
Fix incorrect parsing in chan_gtalk when xmpp contains extra whitespaces
To drill into the xmpp to find the capabilities between channels, chan_gtalk
calls iks_child() and iks_next(). iks_child() and iks_next() are functions in
the iksemel xml parsing library that traverse xml nodes. The bug here is that
both iks_child() and iks_next() will return the next iks_struct node
*regardless* of type. chan_gtalk expects the next node to be of type IKS_TAG,
which in most cases, it is, but in this case (a call being made from the
Empathy IM client), there exists iks_struct nodes which are not IKS_TAG data
(they are extraneous whitespaces), and chan_gtalk doesn't handle that case,
so capabilities don't match, and a call cannot be made.
iks_first_tag() and iks_next_tag(), on the other hand, will not return the
very next iks_struct, but will check to see if the next iks_struct is of
type IKS_TAG. If it isn't, it will be skipped, and the next struct of type
IKS_TAG it finds will be returned. This assures that chan_gtalk will find
the iks_struct it is looking for.
This fix simply changes all calls to iks_child() and iks_next() to become
calls to iks_first_tag() and iks_next_tag(), which resolves the capability
matching.
The following is a payload listing from Empathy, which, due to the extraneous
whitespace, will not be parsed correctly by iksemel:
<iq from='dbrooksjab@235-22-24-10/Telepathy' to='astjab@235-22-24-10/asterisk' type='set' id='542757715704'> <session xmlns='http://www.google.com/session' initiator='dbrooksjab@235-22-24-10/Telepathy' type='initiate' id='1837267342'> <description xmlns='http://www.google.com/session/phone'> <payload-type clockrate='16000' name='speex' id='96'/>
<payload-type clockrate='8000' name='PCMA' id='8'/>
<payload-type clockrate='8000' name='PCMU' id='0'/>
<payload-type clockrate='90000' name='MPA' id='97'/>
<payload-type clockrate='16000' name='SIREN' id='98'/>
<payload-type clockrate='8000' name='telephone-event' id='99'/>
</description>
</session>
</iq>
Review: http://reviewboard.digium.com/r/181/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
................
r185299 | mmichelson | 2009-03-31 10:34:29 -0500 (Tue, 31 Mar 2009) | 15 lines
Blocked revisions 185298 via svnmerge
........
r185298 | mmichelson | 2009-03-31 10:34:05 -0500 (Tue, 31 Mar 2009) | 10 lines
Fix some state_interface stuff that was in trunk but not in the backport to 1.4.
Issue #14359 was fixed between the time that I posted the review of the backport
of the state interface change for 1.4. This merges the changes from that issue
back into 1.4.
(closes issue #14359)
Reported by: francesco_r
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185197 | file | 2009-03-31 11:07:36 -0300 (Tue, 31 Mar 2009) | 15 lines
Merged revisions 185196 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185196 | file | 2009-03-31 11:06:39 -0300 (Tue, 31 Mar 2009) | 8 lines
Fix crash when moving audiohooks between channels.
Handle the scenario where we are called to move audiohooks between channels
and the source channel does not actually have any on it.
(closes issue #14734)
Reported by: corruptor
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185122 | rmudgett | 2009-03-30 15:41:24 -0500 (Mon, 30 Mar 2009) | 26 lines
Merged revisions 185120 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185120 | rmudgett | 2009-03-30 15:38:11 -0500 (Mon, 30 Mar 2009) | 19 lines
Make chan_misdn BRI TE side normally defer channel selection to the NT side.
Channel allocation collisions are not handled by chan_misdn very well.
This patch simply avoids the problem for BRI only.
For PRI, allocation collisions are still possible but less likely since
there are simply more channels available and each end could use a different
allocation strategy.
misdn.conf options available:
te_choose_channel - Use to force the TE side to allocate channels.
method - Specify the channel allocation strategy.
(closes issue #13488)
Reported by: Christian_Pinedo
Patches:
isdn_lib.patch.txt uploaded by crich
Tested by: crich, siepkes, festr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185072 | mmichelson | 2009-03-30 11:26:48 -0500 (Mon, 30 Mar 2009) | 45 lines
Merged revisions 185031 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185031 | mmichelson | 2009-03-30 11:17:35 -0500 (Mon, 30 Mar 2009) | 39 lines
Fix queue weight behavior so that calls in low-weight queues are not inappropriately blocked.
(This is copied and pasted from the review request I made for this patch)
Asterisk has some odd behavior when queue weights are used. The current logic used when
potentially calling a queue member is:
If the member we are going to call is part of another queue and _that other queue has any
callers in it_ and has a higher weight than the queue we are calling from, then don't try
to contact that member. The issue here is what I have marked with underscores. If the
higher-weighted queue has any callers in it at all, then the queue member will be unreachable
from the lower-weighted queue. This has the potential to be really really bad if using a
queue strategy, such as leastrecent or fewestcalls, with the potential to call the same
member repeatedly.
The fix proposed by garychen on issue 13220 is very simple and, as far as I can see, works
well for this situation. With this set of changes, the logic used becomes:
If the member we are going to call is part of another queue, the other queue has a higher
weight than the queue we are calling from, and the higher weight queue has at least as many
callers as available members, then do not try to contact the queue member. If the higher
weighted queue has fewer callers than available members, then there is no reason to deny
the call to this member since the other queue can afford to spare a member.
Since the fix involved writing a generic function for determining the number of available
members in the queue, I also modified the is_our_turn function to make use of the new
num_available_members function to determine if it is our turn to try calling a member. There
is one small behavior change. Before writing this patch, if you had autofill disabled, then
if you were the head caller in a queue, you would automatically be told that it was your
turn to try calling a member. This did not take into account whether there were actually any
queue members available to take the call. Now we actually make sure there is at least one
member available to take the call if autofill is disabled.
(closes issue #13220)
Reported by: garychen
Review: http://reviewboard.digium.com/r/202/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
................
r184986 | mmichelson | 2009-03-30 10:25:04 -0500 (Mon, 30 Mar 2009) | 27 lines
Blocked revisions 184980 via svnmerge
........
r184980 | mmichelson | 2009-03-30 10:23:59 -0500 (Mon, 30 Mar 2009) | 22 lines
Backport state interface changes to app_queue from trunk.
After several issues raised on the Asterisk bugtracker against
the 1.4 branch were determined to be fixable with the state interface
change available in the 1.6.X series, it finally came time to just
suck it up and backport the change.
For a detailed explanation of what this change entails, the original
trunk commit for this feature may be found here:
http://svn.digium.com/view/asterisk?view=revision&revision=97203
In addition, the details for the use of this change to fix the problems
stated in issue #12970 may be found in the review request I made for
this change. It is linked below.
(closes issue #12970)
Reported by: edugs15
Review: http://reviewboard.digium.com/r/116
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
