When terminating the threads thrashing a sorcery memory cache each
would be told to stop and then we would wait on them. During at
least one thrashing test this was problematic due to the specific
usage pattern in use. It would take some time for termination of the
thread to occur.
This would occur due to contention between the threads retrieving
and the threads updating the cache. As the retrieving threads are
given priority it may be some time before the updating threads
are able to proceed.
This change makes it so all threads are told to stop and then each
are joined to ensure they stop. This way all the threads should
stop at around the same time instead of waiting for one to stop,
the next to stop, then the next, and so on. As a result of this
the execution time for each thrash test is much closer to their
expected value than previously seen as well.
Change-Id: I04a53470b0ea4170b8819180b0bd7475f3642827
A user cannot set new bridge options after the conference is created by
the first user. Attempting to do so is documented as undefined behavior.
This patch ensures that the bridge profile options used are from the
conference and not what a subsequent user may have tried to set.
Change-Id: I1b6383eba654679e5739d5a8de98199cf074a266
* changes:
app_confbridge: Add ability to get the muted conference state.
app_confbridge.c: Update CONFBRIDGE and CONFBRIDGE_INFO documentation.
app_confbridge: Make non-admin users join a muted conference muted.
The SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 defines did not exist prior
to OpenSSL version 1.0.1. A recent commit attempts to, by default, set
these options, which can cause problems on systems with older OpenSSL
installations.
This commit adds a configure script check for those defines and will not
attempt to make use of those if they do not exist. We will print a
warning urging the user to upgrade their OpenSSL installation if those
defines are not present.
Change-Id: I6a2eb9a43fd0738b404d8f6f2cf4b5c22d9d752d
Device state subscription lifetimes were governed by when the
subscription was established and unsubscribed from. However, it is
possible that at the time of unsubscription, there could be device state
events still in flight. When those device state events occur, the device
state callback could attempt to dereference a freed pointer. Crash.
This change ensures that the lifetime of the device state subscription
does not end until the underlying stasis subscription has confirmed that
its final message has been sent.
Change-Id: I25a0f1472894c1a562252fb7129671478e25e9b2
During ICE negotiation the IPs of the local interfaces are sent to the remote
peer as host candidates. In many cases Asterisk is behind a static one-to-one
NAT, so these host addresses will be internal IP addresses.
To help in hiding the topology of the internal network, this patch adds the
ability to override the host candidates by matching them against a
user-defined list of replacements.
Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f
This change exposes the configuration of various aspects of the TLS
support and sets the default to the modern standards.
The TLS cipher is now set to the best values according to the
Mozilla OpSec team, different TLS versions can now be disabled, and
the cipher order can be forced to be that of the server instead of
the client.
ASTERISK-24972 #close
Change-Id: I0a10f2883f7559af5e48dee0901251dbf30d45b8
Sending UDPTL packets to Asterisk with the right amount of missing
sequence numbers and enough redundant 0-length IFP packets, can make
Asterisk crash.
ASTERISK-25603 #close
Reported by: Walter Doekes
ASTERISK-25742 #close
Reported by: Torrey Searle
Change-Id: I97df8375041be986f3f266ac1946a538023a5255
Setting the sip.conf timert1 value to a value higher than 1245 can cause
an integer overflow and result in large retransmit timeout times. These
large timeout times hold system file descriptors hostage and can cause the
system to run out of file descriptors.
NOTE: The default sip.conf timert1 value is 500 which does not expose the
vulnerability.
* The overflow is now detected and the previous timeout time is
calculated.
ASTERISK-25397 #close
Reported by: Alexander Traud
Change-Id: Ia7231f2f415af1cbf90b923e001b9219cff46290
test_dlinklists doesn't need to NOTICE everyone that every macro worked.
res_phoneprov doesn't need to VERBOSE everyone that a phoneprov extension or
provider was registered.
res_odbc was missing a newline at the end of one message.
Change-Id: I6c06361518ef3711821795e535acd439782a995e
A regression was introduced where searching for realtime PJSIP objects
by regex by starting the regex with a leading "^" would cause no items
to be returned.
This was due to a change which attempted to drop the requirement for a
leading "^" to be present due to how some CLI commands formulate their
regexes. However, the change, rather than simply eliminating the
requirement, caused any regexes that did begin with "^" to end up not
returning the expected results.
This change fixes the problem by inspecting the regex and formulating
the realtime query differently depending on if it begins with "^".
ASTERISK-25702 #close
Reported by Nic Colledge
Patches:
realtime_retrieve_regex.patch submitted by Alexei Gradinari License #5691
Change-Id: I055df608a6e6a10732044fa737a9fe8dca602693
The module res_xmpp does not accept usernames in the form used in component
mode (XEP-0114). In component mode there is no @something in the name.
In component mode the connection is now not dropped anymore.
If the xmpp server sends out a "stream" tag before handshake is finished,
the connection gets dropped in res_xmpp. Now this tag will be ignored and
the connection will be established.
After connecting there will be an exchange of presence states. This does
not work as expected in component mode. The responsible function
"xmpp_pak_presence" is left before the states get sent out. Sending
presence states in component mode is now moved to the top of the function.
ASTERISK-25735 #close
Change-Id: I70e036f931c3124ebb2ad1e56f93ed35cfdd9d5c
A recent commit set qualify_timeout to Decimal which isn't supported.
This path corrects it to Float.
Change-Id: I038f5274ba8cb60f8518a5845ce448d49306aadf
When I ask asterisk to send a SIP NOTIFY message to a sip peer using either a)
AMI action: SIPnotify or b) cli command: sip notify <cmd> <peer>, I expect
asterisk to include the same value for its own ip in both cases a) and b),
but it seems a) produces a contact header like Contact:
<sip:asterisk@192.168.1.227:8060> whereas b) produces a contact header like
<sip:asterisk@127.0.0.1:8060>. 0.0.0.0:8060 is my udpbindaddr in sip.conf
My guess is that manager_sipnotify should call
ast_sip_ouraddrfor(&p->sa, &p->ourip, p) the same way sip_cli_notify does,
because after applying this patch, both cases a) and b) produce
the contact header that I expect: <sip:asterisk@192.168.1.227:8060>
Reported by: Stefan Engström
Tested by: Stefan Engström
Change-Id: I86af5e209db64aab82c25417de6c768fb645f476
* Added CONFBRIDGE_INFO(muted,) for querying the muted conference state.
* Added Muted header to AMI ConfbridgeListRooms action response list
events to indicate the muted conference state.
* Added Muted column to CLI "confbridge list" output to indicate the muted
conference state and made the locked column a yes/no value instead of a
locked/unlocked value.
ASTERISK-20987
Reported by: hristo
Change-Id: I4076bd8ea1c23a3afd4f5833e9291b49a0c448b1
The Makefile only optionally includes makeopts so when goals like uninstall that
dont depend on anything else are run after a distclean, rules like
'rm -f "$(DESTDIR)$(ASTMODDIR)/"*' get run as 'rm -f ""/*' which attempts
to remove everything in the root directory.
Although there's a rule defined for makeopts which prints a message and does
an 'exit 1', since '-include makepopts' was specified (with the -), the exit
was ignored letting the rest of the rules run.
This patch makes makeopts required unless the goal has the string 'clean' in it.
ASTERISK-25730 #close
Reported-by: George Joseph
Change-Id: I1bce59a7ea4f48e7a468e22b2abbb13c63417ac7
The config options framework is strict in that configuration options must
be documented unless XML documentation support is not available. In
practice this is useful as it ensures documentation exists however in
off-nominal cases this can cause strange problems.
If it is expected that a config option has a non-zero or non-empty
default value but the config option documentation is unavailable
this reasonable expectation will not be met. This can cause obscure
crashes and weirdness depending on how the code handles it.
This change tweaks the behavior to ensure that the config option
is still allowed to register, apply default values, and be set when
devmode is not enabled. If devmode is enabled then the option can
NOT be set.
This also does not remove the initial documentation error message that
is output on load when registering the configuration option.
ASTERISK-25725 #close
Change-Id: Iec42fca6b35f31326c33fcdc25473f6fd7bc8af8
A recent change to queue channel variable setting to the Stasis control
queue caused a regression. When setting channel variables, it is
possible to give a NULL channel variable value in order to unset the
variable (i.e. remove it from the channel variable list). The change
introduced a call to ast_variable_new(), which is not tolerant of NULL
channel variable values.
This new change switches from using ast_variable to using a custom
channel variable struct that is lighter weight and NULL value-tolerant.
Change-Id: I784d7beaaa3c036ea936d103e7caf0bb1562162d
Core and extra sounds 1.5 was recently released! The tarballs contain
change descriptions however I figure more people will see this one so
I'll try to be a bit detailed. Approximately 60 sounds were moved from Extra
to Core for en, en_GB, fr and added for languages that didn't already
have Extra sound sets (it,ja,ru).
In addition all of the English and Russian sounds have been completely
re-recorded.
Sounds moved and added:
activated,added,all-circuits-busy-now,astcc-followed-by-pound
at-tone-time-exactly,call-forwarding,call-fwd-no-ans,call-fwd-on-busy
,call-fwd-unconditional,calling,call-waiting,cancelled,
cannot-complete-as-dialed,check-number-dial-again,conf-full,de-activated
,disabled,do-not-disturb,enabled,enter-num-blacklist,entr-num-rmv-blklist
,extension,feature-not-avail-line,for,from-unknown-caller,goodbye,hello
,if-correct-press,im-sorry,info-about-last-call,is,is-in-use,is-set-to
,location,number,number-not-answering,num-was-successfully,one-moment-please
,please-try-again,pls-hold-while-try,pls-try-call-later,pm-invalid-option
,privacy-to-blacklist-last-caller,removed,simul-call-limit-reached
,something-terribly-wrong,sorry,sorry-youre-having-problems,speed-dial
,speed-dial-empty,telephone-number,time,to-call-this-number,to-extension
,to-listen-to-it,to-rerecord-it,unidentified-no-callback,with,you-entered
,your
There were also a few random fixes here and there to file names for a few
of the languages.
ASTERISK-25068 #close
Change-Id: I2b594344ec585d7dfd922b40c1af43b1508828b3
A test recently uncovered that running an ill-timed AMI command to show
inbound subscriptions could cause a crash since Asterisk will try to
operate on a freed subscription.
The fix for this is to remove the subscription tree from the list of
subscriptions at the time that we are sending our final NOTIFY request
out. This way, as the subscription is in the process of dying, it is
inaccessible from AMI.
Change-Id: Ic0239003d8d73e04c47c12dd2a7e23867e5b5b23
sip_sipredirect uses sscanf to copy up to 256 characters to a stacked buffer
of 256 characters. This patch reduces the copy to 255 characters to leave
room for the string null terminator.
ASTERISK-25722 #close
Change-Id: Id6c3a629a609e94153287512c59aa1923e8a03ab
