This fix checks to make sure that if a confbridge record start command is issued
from the CLI it will always use the file name given on the CLI even if it
changes between start/stop records for a conference. Previously it had been
reusing the same file between start/stops even if a new filename was given.
(issue AST-1088)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the end result of the ICE negotiation resulted in the path for media
changing it was possible for the strictrtp code to discard the RTP packets.
This change causes strictrtp to enter learning mode once again when the
ICE negotiation has completed successfully.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A deadlock can occur in chan_iax2 when it attempts to set the caller ID, as it
already holds the iax2 private lock and improperly fails to obtain the channel
lock before calling ast_set_callerid. By not safely obtaining the channel lock,
a locking inversion can take place, causing a deadlock.
This patch solves this by calling the required deadlock avoidance functions
that obtain the channel lock before setting the caller ID.
Thanks to Pavel for fixing my syntax errors and testing this patch out.
(closes issue ASTERISK-21128)
Reported by: Pavel Troller
Tested by: Pavel Troller
patches:
ASTERISK-21128-1.8.diff uploaded by mjordan (license 6283)
ASTERISK-21128-modified-1.8.diff uploaded by Pavel Troller (license 6302)
........
Merged revisions 382233 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some channel drivers, specifically those that have a varying rate in the
number of audio samples, the audio quality for a MeetMe conference can be
exceedingly poor. This is due to a unilateral application of the DENOISE
function in func_speex to channels joining the conference.
The denoiser function in the speex library is initialized with the number of
audio samples in each sample that will be provided to it. If the number of
audio samples changes, the denoiser has to be thrown away and re-initialized.
While this could be worked around by removing func_speex, that doesn't help
if you actually use the denoiser with other channels on the system.
This patches does the following:
* Checks for the presence of func_speex as opposed to codec_speex when
determining if the DENOISE function is present (which is where the function
is actually implemented)
* Adds an option to MeetMe 'n' that causes the denoiser to not be applied
to a channel when it joins. This keeps the current behavior the default, but
let's users disable the denoiser if it causes problems on their system.
Review: https://reviewboard.asterisk.org/r/2358
(closes issue AST-1062)
Reported by: Thomas Arimont
........
Merged revisions 382227 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382230 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ConfBridge was refactored to better handle the concept of marked,
wait_marked, and normal users co-existing in a conference (thereby implementing
a state machine for the conference), the wait_marked users were put into their
own list of conference participants, separate from the active users. This list
is used for wait_marked users when they are waiting in a conference but no
marked user has joined; normal users may have joined at this point however.
There are several AMI/CLI commands that affect conference users that were not
checking the wait_marked users list:
* CLI/AMI commands that mute/unmute a participant. In this case, wait_marked
users have to remain in their particular state and should not be affected -
however, the commands would return "Channel not found" as opposed to the
appropriate error condition.
* CLI/AMI commands that kick a participant. An admin should always be able to
kick a participant out of the conference.
This patch fixes both sets of commands, and cleans up the CLI commands slightly
by allowing them to complete a participant name (this was supposed to have been
added, but the function call was commented out and wasn't implemented).
Review: https://reviewboard.asterisk.org/r/2346/
(closes issue AST-1114)
Reported by: John Bigelow
Tested by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge and Page require that there always be a default bridge and user
profile available. While properties of the default profiles can be overriden
in the configuration file, removing them can create situations where neither
application can function properly.
This patch ensures that if an administrator removes the profiles from the
confbridge.conf configuration file, the profiles are added upon load.
Documentation clarifying this has been added to the confbridge.conf.sample file.
Review: https://reviewboard.asterisk.org/r/2356/
(closes issue AST-1115)
Reported by: John Bigelow
Tested by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems using variadic argument macros in res_config_mysql.
* Improper use of va_end. Multiple calls to va_end were possible resulting in
an unbalanced matching of va_start/va_end.
* Calls to va_arg after a possible encounter of a SENTINEL value.
This patch corrects those errors.
(closes issue ASTERISK-19451)
Reported by: wdoekes
patches:
ASTERISK-19451-1.8--2.diff uploaded by wdoekes (License 5674)
........
Merged revisions 382021 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Somehow, chan_jingle has managed to operate for years without setting the
sin_family on its bindaddr socket. This patch properly sets the field during
initial module load to AF_INET.
Note that the patch on the issue was modified slightly to change the
initialization of the socket from allocation of a chan_jingle private to the
module initialization, as the bindaddr object (which is static) only needs to
have the address set once.
(closes issue ASTERISK-19341)
Reported by: andre valentin
patches:
0105-chan_jingle.patch uploaded by avalentin (License 6064)
........
Merged revisions 381975 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When converting AMI class authorizations to a string representation, the
method always appends the ALL class authorization. This is especially
important for events, as they should always communicate that class
authorization - even if the event itself does not specify ALL as a class
authorization for itself. (Events have always assumed that the ALL class
authorization is implied when they are raised)
Unfortunately, this did mean that specifying a user with restricted class
authorizations would show up in the 'manager show user' CLI command as
having the ALL class authorization.
Rather then modifying the existing string manipulation function, this patch
adds a function that will only return a string if the field being compared
explicitly matches class authorization field it is being compared against.
This prevents ALL from being returned unless it is actually specified for
the user.
(closes issue ASTERISK-20397)
Reported by: Johan Wilfer
........
Merged revisions 381939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ParkAndAnnounce application documentation for the optional return_context
parameter states the following:
return_context
The goto-style label to jump the call back into after timeout. Default
'priority+1'.
Unfortunately, the application was sending the channel back into the dialplan
at 'priority', which is the ParkAndAnnounce application call. This causes an
infinite loop of the channel constantly being parked, announced, timed out,
parked, announced, timed out... while fun, especially for those callers you
wish to drive to the end of madness, this was not the intent of the
application.
(closes issue ASTERISK-20113)
Reported by: serginuez
patches:
app_parkandannounce.diff uploaded by serginuez (License 6405)
........
Merged revisions 381916 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When IPv6 support was added to FastAGI, the intent was to have the ability to
check all addresses resolved for a host since we might receive an IPv4 address
and an IPv6 address. The problem with the current code, is that, since we are
doing O_NONBLOCK, we get EINPROGRESS when calling ast_connect() but are ignoring
this instead of handling it. We break out of the loop and continue on. When we
later call ast_poll(), it succeeds but we never check if we have a connection or
not on the socket level. We then attempt to send data to the host address that
we think is setup and it fails. We then check the errno and see that we have
"connection refused" and then return with agi failed.
This patch does the following:
* Handles EINPROGRESS by creating the function handle_connection()
- ast_poll() was moved into this function
- This function checks the results of the connection on the socket level after
calling ast_poll()
* Continues to the next address if the above fails to create a connection
* Once all addresses resolved are tried and we still are unable to establish a
connection, then we return that the FastAGI call failed
(closes issue ASTERISK-21065)
Reported by: Jeremy Kister
Tested by: Jeremy Kister, Michael L. Young
Patches:
asterisk-21065_poll_correctly_v4.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2330/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Apparently this feature became broken in 11, probably as a result
of the Hangup Cause project.
(closes issue ASTERISK-21113)
Reprted by: Heiko Wundram
Patches:
app_dial.patch uploaded by Heiko Wundram (license 5822)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk was a little too pro-active in claiming that it found launchd. On
systems without launchd - such as FreeBSD - this resulted in certain items
in Asterisk that conflict with launchd to not be selectable, such as
res_timing_kqueue.
(closes issue ASTERISK-20749)
Reported by: Oleg Baranov
........
Merged revisions 381847 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The vm_mailbox_snapshot_create function has an option that combines the
contents of INBOX and Old into a single snapshot. The intent of this is that
both 'new' messages and 'deleted' messages are given in a single snapshot, as
some applications prefer this view of the voicemail world. Unfortunately, the
initial implementation ignored the "Urgent" folder. The "Urgent" folder is a
pseudo-INBOX, in that new messages left with the 'U' flag will be placed in
that folder as opposed to INBOX. Thus, the option failed the intent with which
it was added.
This patch makes it so that the "Urgent" folder is included in the snapshot
when that option is used.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381835 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The incorrect callid was being written to the "data1" field in queue_log table
for transfer events. The callid of the queue was being written instead of the
transfer target's callid. This now gets the correct "transfer to" number and
places that in the "data1" field of the queue_log table when a transfer event
is triggered.
(closes issue ASTERISK-19960)
Reported by: vladimir shmagin
........
Merged revisions 381770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you started/stopped recording of a conference multiple times channels
would remain active even when all participants left the conference. This
was due to the fact that a reference to the confbridge was being added
every time a start record command was issued, but when the recording was
stopped there was no matching de-reference thus keeping the conference alive.
Made sure only a single reference is added for the record thread no matter how
many times recording is started/stopped. A de-reference is issued upon thread
ending.
Note, this issue is being fixed under AST-1088 since it relates to it and
should have been corrected along with those modifications.
(issue AST-1088)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381737 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A deadlock occurred after starting/stopping and then restarting a confbridge
recording. Upon starting a recording a record thread is created that holds a
lock until just before exiting. Stopping the recording does not stop/exit the
thread or release the lock. The thread waits until recording begins again.
Starting a stopped recording signals the thread to continue and start recording
again. However restarting the recording also created another record thread
resulting in a deadlock. The fix was to make sure the record thread was only
created once.
Also it was noted that filenames for the recordings were being concatenated for
each start/stop. This was fixed by creating a new file for each conference
session and appending the actual recorded data within the file (e.g. passing
the 'a' option to MixMonitor).
(issue AST-1088)
Reported by: John Bigelow
Review: http://reviewboard.digium.internal/r/374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, presencestate information was sent whenever the state was not
NOT_SET. When r381594 actually returned INVALID presence state in all the
places it was supposed to, it caused chan_sip to start adding presence
state information to NOTIFY requests that it previously would not have
added. chan_sip shouldn't be adding presence state information when the
provider is in an invalid state; users can't set the state to invalid and
an invalid state always implies that the provider is in an error condition.
(issue AST-1084)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a crash in Asterisk that could be caused by using the
PresenceState AMI action while providing an invalid provider. This patch
also adds some additional warnings when a user attempts to provide the
PresenceState action with invalid data, and removes some NOTICE statements
that were still lurking in the code from testing.
(closes issue AST-1084)
Reported by: John Bigelow
Tested by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reference counting for the channel and its tech_pvt got messed up at
some point between 1.8 and 11. The result was that if a BYE for a dialog
that had been replaced (via an INVITE with Replaces) was received, Asterisk
would crash due to trying to access data on a channel that was no longer there.
The fix I introduced is to remove code that both unrefs the sip_pvt and sets
the channel's tech_pvt to NULL when an INVITE with Replaces is handled. This
way when a BYE is received, the tech_pvt will be non-NULL and so the BYE can
be processed and not cause a crash.
(closes issue ASTERISK-20929)
reported by Kristopher Lalletti
patches:
ASTERISK-20929.patch uploaded by Mark Michelson (License #5049)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While autoservice is running and servicing a channel the callid is being stored
and removed in the thread's local storage for each iteration of the thread loop.
If debug was set to a sufficient level the log file would be spammed with callid
thread local storage debug messages.
Added a new function that checks to see if the callid to be stored is different
than what is already contained (if anything). If it is different then
store/replace and log, otherwise just leave as is. Also made it so all logging
of debug messages pertaining to the callid thread storage outputs only when
TEST_FRAMEWORK is defined.
(issue ASTERISK-21014)
(closes issue ASTERISK-21014)
Report by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2324/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some bad copy/pasting resulted in using the audio crypto attribute for both
text and video RTP. Also the audio crypto isn't set until after these, so it
was really just bad all around.
(closes ASTERISK-20905)
Reported by: Kristopher Lalletti
patches:
rtp_crypto_video_text.diff uploaded by Jonathan Rose (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The function call ast_db_deltree returns the number of row deleted, or a
negative number if it failed. DBdeltree was treating any non-zero return
as an error, causing a spurious verbose error message to be displayed.
This patch handles the return code of ast_db_deltree correctly.
(closes issue ASTERISK-21070)
Reported by: ianc
patches:
dbdeltree.diff uploaded by ianc (License #5955)
........
Merged revisions 381364 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When sip_ref_peer and sip_unref_peer were exported to be usable in
channels/sip/security_events.c, modifications to those functions when
building under REF_DEBUG were not taken into account. This change
moves the necessary defines into sip.h to make them accessible to
other parts of chan_sip that need them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If say.conf did not exists prior to originally loading module app_playback it
would not load on subsequent reloads of the module once it had been created.
This occurred because upon reload of the app_playback module it would only
load a new configuration if an old one had previously existed. This fix simply
removed the association between checking if an old configuration existed and
the loading of the new one.
(closes issue ASTERISK-20800)
Reported by: pgoergler
........
Merged revisions 381216 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An error existed in res_xmpp where it would attempt to delete attributes from
a node that itself was also deleted. Per the iksemel documentation, attributes
added using iks_insert are copied to the parent node's stack, and will be
reclaimed when that node is itself destroyed.
(closes issue ASTERISK-20982)
Reported by: marcelloceschia
patches:
delete-node-fix.diff uploaded by marcelloceschia (License 6036)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unloading ConfBridge caused the next AMI action received to crash
Asterisk.
* Add the missing unregister of AMI action ConfbridgeSetSingleVideoSrc
when ConfBridge is unloaded.
(closes issue ASTERISK-20994)
Reported by: Jeremy Kister
Patches:
jira_asterisk_20994_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: Rusty Newton, Jeremy Kister
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I added my extensive suite of session timer unit tests, apparently one of
them was failing and I never noticed. If neither Min-SE nor Session-Expires is
set in the header, it was responding with a Session-Expires of the global
maxmimum instead of the configured max for the endpoint.
(issue ASTERISK-20787)
........
Merged revisions 380973 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch ensures that d->activeline and l->activesub are moved over to the
new device and line so that on callend the appropriate subs can be found
to complete hangup before device resets.
(closes issue ASTERISK-16610)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-reloadactive01.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make skinny reset vmexten '\0' on reload to ensure that
it is set to '\0' if the appropriate item is removed/commented in
skinny.conf. part of ASTERISK-21037
Reported by: snuffy
Tested by: snuffy, myself
Patches:
part of immed_dial_fix.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Page and ConfBridge custom announcement did not play when users
entered the conference.
* Fix the CONFBRIDGE(user,announcement) file not getting played. The code
to do this got removed accidentally when the ConfBridge code was
restructured to be more state machine like.
* Fixed play_prompt_to_user() doxygen comments.
* Fixed the Page A(x) and n options for the caller. The caller never
played the announcement file and totally ignored the n option. The code
to do this was lost when the application was converted to use ConfBridge.
* Factored out setup_profile_bridge(), setup_profile_paged(), and
setup_profile_caller() routines to setup ConfBridge profiles. Made each
profile setup routine use the default template if one has not already been
setup by dialplan.
(closes issue ASTERISK-20990)
Reported by: Jeremy Kister
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A marked user ending a conference with only end_marked users generates
error messages:
ERROR[0000][C-00000000]: confbridge/conf_state.c:47 conf_invalid_event_fn: Invalid event for confbridge user ''
* The MULTI_MARKED state was doing too much when it was kicking out the
end_marked users from the conference. The kicked out users will clean up
after themselves when they exit the conference.
(closes issue ASTERISK-20991)
Reported by: Jeremy Kister
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
