Previously, Asterisk only processed session timer information if both the
'Supported: timer' and 'Session-Expires' headers were present. However, the
Session-Expires header is optional. If we were to receive a request with a
Min-SE greater than our configured session-expires, we would respond with a
'Session-Expires' header that was too small.
This patch cleans the situation up a bit, always processing timer information
if the 'Supported: timer' header is present.
(closes issue ASTERISK-20787)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/2299/
........
Merged revisions 380696 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also adds proper dependency checking, and direct .a file targets. We don't
take advantage of this currently, but we will soon.
(issue ASTERISK-20815)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Building Asterisk on Raspbian with hard-float support fails as it uses the
string 'linux-gnueabihf' for host os, as opposed to 'linux-gnueabi'. This patch
modifies the configure script for Asterisk such that it will match on any
string beginning with 'linux-gnueabi', as opposed to requiring an explicit
match.
(closes issue ASTERISK-21006)
Reported by: Christian Hesse
Tested by: Christian Hesse
patches:
linux-gnueabihf.patch uploaded by Christian Hesse (license 6459)
linux-gnueabihf-autoconf.patch uploaded by Christian Hesse (license 6459)
........
Merged revisions 380520 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A user in #asterisk ran into a problem where a configuration error prevented
the chan_sip module from being loaded. Upon fixing their configuratione error,
they could no longer load the chan_sip module. This was because the
configuration checking happened after the SIP provider was registered with the
Asterisk core, and subsequent attempts to load the SIP module failed as the
provider was already registered.
Since we want to detect any failure in registering chan_sip as early as
possible (as that could be emblematic of a deeper mismatch between module
and Asterisk core), this patch does not change the registration location, but
does ensure that if a module load is declined, we unregister the module as
the SIP api provider.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC5347 section 2.5.2 states the following:
...
The attribute "T38MaxBitRate" was once incorrectly registered with
IANA as "T38maxBitRate" (lower-case "m"). In accordance with T.38
examples and common implementation practice, the form "T38MaxBitRate"
SHOULD be generated by implementations conforming to this package.
In general, it is RECOMMENDED that implementations of this package
accept lowercase, uppercase, and mixed upper/lowercase encodings of
all the T.38 attributes.
...
Asterisk currently does not perform case insensitive matching on the T.38
attributes. This causes the T38MaxBitRate attribute to be negotiated at
2400 baud instead of 14400 (or whatever value you actually wanted).
This patch makes it so that when we compare T.38 attributes, we do so in a case
insensitive fashion.
Note that while the issue reporter did not directly write the patch, they
contributed to it (and would have provided one themselves if the license had
gone through a tad faster), and hence get attribution for it.
Review: https://reviewboard.asterisk.org/r/2298/
(closes issue ASTERISK-20897)
Reported by: Eric Hill
Tested by: Eric Hill
patches:
-- uploaded by Eric Hill
........
Merged revisions 380458 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ICalendar module had a systemic memory leak on each fetch of data from
the ICalendar source. The previous fetched data was not being properly
disposed. This patch makes it so that before each fetch of data, we dispose
of the previously fetched data.
(closes issue ASTERISK-21012)
Reported by: Joel Vandal
Tested by: Joel Vandal
........
Merged revisions 380451 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Multiple channels logging in as the same agent can result in dead channels
waiting for a condition signal that will never come because another
channel thread stole it. A symptom is chan_sip repeatedly generating
warning messages about rescheduling autodestruction of dialogs with an
agent channel owner.
* Made only login_exec() (the app AgentLogin) clear the agent_pvt->chan
pointer to prevent multiple channels from logging in as the same agent.
agent_read(), agent_call(), and agent_set_base_channel() no longer
disconnect the agent channel from the agent_pvt. This also eliminates the
need to keep checking for agent_pvt->chan being NULL.
* Made agent_hangup() not wake up the AgentLogin agent thread until it is
done.
* Made agent_request() not able to get the agent until he has logged in
and any wrapup time has expired.
* Made agent_request() use ast_hangup() instead of agent_hangup() to
correctly dispose of a channel.
* Removed agent_set_base_channel(). Nobody calls it and it is a bad thing
in general.
* Made only agent_devicestate() determine the current device state of an
agent. Note: Agent group device states have never been supported.
Review: https://reviewboard.asterisk.org/r/2260/
........
Merged revisions 380364 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original fix (r380043) for getting Asterisk to respond with the correct
tag overlooked some corner cases, and the fact that the same code is in 1.8.
This patch moves the building of the crypto line out of
sdp_crypto_process(). Instead, it merely copies the accepted tag. The call to
sdp_crypto_offer() will build the crypto line in all cases now, using a tag of
"1" in the case of sending offers.
(closes issue ASTERISK-20849)
Reported by: José Luis Millán
Review: https://reviewboard.asterisk.org/r/2295/
........
Merged revisions 380347 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced which removed automatic fallback behavior from
the PBX. This behavior was used by call parking (or at least documented as
how the feature works) in order to select an extension when the flat channel
extension wasn't available from the comebackcontext. Parking now handles
the fallbacks internally in order to keep behavior matching with how it is
documented.
(closes issue ASTERISK-20716)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2296/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r369028, chan_sip's processing of media streams in an SDP was modified to
better handle multiple offered media streams. Part of that change modified
how streams were declined. Previously, declined media streams were not
handled in an RFC compliant manner; now, we set the port number to 0 in the
media stream definition and proceed on with the next media stream.
Unfortunately, the formatting of the declined media stream forgot to append a
'\r\n' to the end of the media stream. This is normally added to the accepted
media streams later on in the processing of the SDP. Since the declined media
stream uses a different buffer than the accepted media streams (and is a
malloc'd buffer as opposed to a struct ast_str), it's easier to just slap the
'\r\n' on the declined media stream buffer rather than attempt to append it
later on.
So, that's what we do. And now some devices (and probably some providers) will
be a bit happier (but probably not terribly happy, since we just rejected
something they offered).
Review: https://reviewboard.asterisk.org/r/2297/
(closes issue ASTERISK-20908)
Reported by: Dennis DeDonatis
Tested by: Dennis DeDonatis
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ptlib 2.10.9, the configure script fails due to grep returning multiple
matches for the pattern it searches for. This patch updates the pattern
matching to return only the actual version for the symbol searched for,
PTLIB_VERSION.
(closes issue ASTERISK-20980)
Reported by: Stefan Reuter
patches:
ASTERISK-20980-1.patch uploaded by Stefan Reuter (license 5339)
........
Merged revisions 380297 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch came about due to a problem observed where wav files had an
empty header. The header is supposed to be updated in wav_close(). It
turns out that this was broken when the cache_record_files option from
asterisk.conf was enabled. The cleanup code was moving the file to its
final destination *before* running the close() method of the file
destructor, so the header didn't get updated.
Another problem here is that the move was being done before actually
closing the FILE *.
Finally, the last bug fixed here is that I noticed that wav_close()
checks for stream->filename to be non-NULL. In the previous cleanup
order, it's checking a pointer to freed memory. This doesn't actually
cause anything to break, but it's treading on dangerous waters. Now the
free() of stream->filename is happening after the format module's
close() method gets called, so it's safer.
Review: https://reviewboard.asterisk.org/r/2286/
........
Merged revisions 380210 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "sound_only_one" sound was not being set even though it was configured. In
looking into this, I found that the "join" and "leave" prompts were not being
set either.
(closes issue ASTERISK-20898)
Reported by: Stephan
Tested by: Stephan
Patches:
asterisk-20898-custom-sounds-ignored.diff uploaded by
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2289/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk responds with an SDP ANSWER for SRTP, it had the code to
correctly fill in the crypto data, which was overwritten by a call to
sdp_crypto_offer. Corrected the situation by changing sdp_crypto_offer
to not replacing crypto data if it already exists.
(closes issue ASTERISK-20849)
Reported by: José Luis Millán
Tested by: Iñaki Baz Castillo
Patches:
fix_sdp_crypto_tags.diff uploaded by Pedro Kiefer (license 6407)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for ConfbridgeList states that the Conference field is
optional. That's not really the case: if you fail to provide a Conference
number, the command will kick back an error.
(closes issue AST-1090)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the problem, but the issue includes a test which is still
being considered for the automated test suite.
(issue ASTERISK-20919)
Reported by: NITESH BANSAL
Patches:
patch_ast_fax_spandsp.patch uploaded by NITESH BANSAL (license 6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The old prompts for the administrator menu were inadequate. They didn't mention
that the menu had additional options through the 8 key and pressing the 8 key
wouldn't reveal what those options were. This patch fixes all of that while
also organizing code pertaining to each individual menu type which was
previously all stored in one gigantic function along with many of the basic
conference functions.
(closes issue AST-996)
Reported by: John Bigelow
Review: http://reviewboard.digium.internal/r/360/
........
Merged revisions 379885 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two bugs:
* If an outbound call is made from a SLA phone using SLAStation, then there is
no ringtone audible to the phone that originates the call. The indication of
the ringing was not being passed to the SLA station; this patch fixes that
by passing through the progress indications.
* If an SLA station hangs up before the called party answers, then the channel
to the called party continues to ring until a timeout occurs. If the called
party manages to answer, Asterisk attempts to connect the called party to
a non-existant MeetMe room. This patch corrects the behavior by abandoning
the call attempt if it detects that the SLA station is no longer in use
while attempting to call the called party.
Review: https://reviewboard.asterisk.org/r/2275/
(closes issue ASTERISK-20462)
Reported by: dkerr
patches:
asterisk-11-bugid20440+20462.patch uploaded by dkerr (license 5558)
asterisk-11-bugid20462.patch uploaded by dkerr (license 5558)
(closes issue ASTERISK-20440)
Reported by: dkerr
patches:
asterisk-11-bugid20440.patch uploaded by dkerr (license 5558)
asterisk-11-bugid20440+20462.patch uploaded by dkerr (license 5558)
........
Merged revisions 379825 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Generate a warning message if sound files do not exist when trying to
play the user count to the conference. Use the new helper routine
sound_file_exists() for consistency.
* Put the new user into autoservice when playing user counts to the
conference.
* Check the return value of ast_bridge_impart().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When iLBC is being used with a jitter buffer and the jb has to
interpolate frames, it generates frames with a null pointer and a
non-zero datalen. This is now handled properly.
(closes issue ASTERISK-20914)
Reported By: John McEleney
Patches:
ASTERISK-20914-1.8.diff uploaded by Matt Jordan (license 6283)
........
Merged revisions 379718 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Skinny device call logging (ie missed, place and received calls) has issues
because the incorrect sequence of callstates is/can be sent to the device.
This patch removes some extra callstate updates driven by forces external
to skinny and ensures the needed intermediary callstate messages are sent.
(closes issue ASTERISK-20964)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
ast11-skinny-calllog01.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An incorrect string initializations was left in ast_str_encode_mime from the
patch that converted string manipulations to use ast_str strings (r191140).
The string initialization causes a crash when ast_str_set is called on
the string later on in the function.
(closes issue ASTERISK-18697)
Reported by: Chris Boot
patches:
minivm-null-pointer-dereference-fix.patch uploaded by bootc (license 6309)
(issue ASTERISK-20854)
Reported by: Chris Warr
Tested by: Chris Warr
........
Merged revisions 379608 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk forks itself into the background via a call to daemon, it must
re-set the pid value of the new process. Otherwise, astcanary gets the pid
value of the process before the fork, which prevents it from running. Asterisk
eventually starts lowering its priority, as it can no longer communicate
with the proverbial canary in the coal mine.
This patch ensures that the correct process identifier is used by astcanary.
Note that this is getting committed to 10 as a regression fix.
(closes issue ASTERISK-20947)
Reported by: Jakob Hirsch
Tested by: mjordan
patches:
asterisk-10.12.0.astcanary_ppid.diff uploaded by Jakob Hirsch (license 6113)
........
Merged revisions 379509 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379510 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379513 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the restructuring work got committed to Confbridge in r375470 to
fix many open issues, it caused a regression in the reported count of
users when conference information was requested via CLI or manager.
This corrects the user count and user information displayed when
listing conference information from the CLI and manager.
(closes issue ASTERISK-20938)
Reported By: Timo Teras
Patches:
confbridge-list.patch uploaded by Timo Teras (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379478 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_voicemail will no longer issue error messages when it retrieves an msg_id
with a NULL value from realtime and will instead simply populate the msg_id
field with a newly generated msg_id. In addition, this patch changes the way
msg_ids are generated to eliminate certain causes of duplicate IDs appearing
within a single system. In addition, when messages are copied, they will now
receive a new msg_id.
(closes issue ASTERISK-20717)
Reported by: Alec Davis
Review: https://reviewboard.asterisk.org/r/2220/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Record-Route parsing copied the header into a char[256] array, which can
be a problem if the header is longer than that. This patch parses the
header in place, without the copy, avoiding the issue.
In addition to the original patch, I added a unit test for the new
get_in_brackets_const function.
(closes issue ASTERISK-20837)
Reported by: Corey Farrell
Patches:
chan_sip-build_route-optimized-rev1.patch uploaded by Corey Farrell (license 5909)
(with minor changes by dlee)
........
Merged revisions 379392 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379393 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per the bluez API, in order to bind to the first available port, the rc_channel
field of the socket addressing structure used to bind the socket should be set
to 0. Previously, Asterisk had set the rc_channel field set to 1, causing it
to connect to whatever happens to be on port 1.
We could probably not explicitly set rc_channel to 0 since we memset the struct
earlier, but explicitly setting it will hopefully prevent someone from coming
in and setting it to some explicit port in the future.
(closes issue ASTERISK-16357)
Reported by: challado
Tested by: Alexander Heinz, Nikolay Ilduganov, benjamin, eliafino, David van Geyn
patches:
ASTERISK-16357.diff uploaded by Nikolay Ilduganov (license 6253)
........
Merged revisions 379342 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Again, since res_jabber/res_xmpp have duplicate APIs, their documentation ref
links have to specify which reference they're referring to. The various
documentation parsers can interpret the module attribute however they want
in order to construct the appropriate links.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since res_jabber/res_xmpp provide the same APIs (app/func/manager/etc.),
the XML documentation for each needs to call out which module is providing
the documentation. The module attribute has been added to the various XML
fragments for this purpose.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379209 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The parser for SMS messages would incorrectly parse out the from number.
The parsing would incorrectly start scanning for the from number at the
same index as the first double quote ("); this would inadvertently cause
it to treat the first double quote as the terminating double quote for
the from number as well.
The SMSSRC should now populate correctly.
(closes issue ASTERISK-16822)
Reported by: menschentier
Tested by: Jonas Falck
patches:
fixSMSSRC.patch uploaded by jonax (license 6320)
(closes issue ASTERISK-19153)
Reported by: Panos Gkikakis
patches:
sms-sender-fix.diff uploaded by roeften (license 5884)
........
Merged revisions 379178 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The chan_misdn channel driver will send a channel with an invalid destination
to the 'i' extension itself if said extension can be reached. It forgot,
however, to set the INVALID_EXTEN channel variable when it bounces the channel
to this extension. Dialplan writers everywhere moaned at yet another
inconsistency.
This is yet another example of why duplicating logic in multiple places results
in bugs that stick around in Jira for just under three years.
Yes: ASTERISK-15456 was created on January 18th, 2010. Patch committed on
January 15th, 2013. Ouch.
(closes issue ASTERISK-15456)
Reported by: Thomas Omerzu
patches:
chan_misdn_invalid.patch2 uploaded by Thomas Omerzu (license 5927)
........
Merged revisions 379145 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
Prevent crash in ConfBridge due to race condition when channels leave bridge
When a channel leaves a bridge, a race condition existed where the
bridge_channel's pvt structure would be accessed after it was disposed of.
This patch prevents that by setting the pointer to the pvt to NULL prior
to disposing of it.
Note that this patch is a backport from Asterisk 10. This particular race
condition was fixed as part of the larger code rework that occurred for that
release.
The solution to this problem was pointed out by Gunnar Harms in ASTERISK-16640.
(closes issue ASTERISK-16640)
Reported by: thomas987
(closes issue ASTERISK-16835)
Reported by: saghul
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@379092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r370252 for ASTERISK-18404, Asterisk's handling of RTP was modified to
better account for out of order RTP packets. This was accomplished by using the
RTP timestamp and sequence number to check for out of order packets. However,
when a SSRC change occurs, the timestamp and sequence number will no longer
have any relation to the previously received packets. The variables tracking
the timestamp and sequence number therefore have to be reset.
(closes issue ASTERISK-20906)
Reported by: Eelco Brolman
patches:
dtmf_on_hold.patch uploaded by Eelco Brolman (license #6442)
........
Merged revisions 378967 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378984 65c4cc65-6c06-0410-ace0-fbb531ad65f3
