https://origsvn.digium.com/svn/asterisk/trunk
........
r202410 | dvossel | 2009-06-22 10:33:35 -0500 (Mon, 22 Jun 2009) | 5 lines
attempting to load running modules
Modules placed in the priority heap for loading were not properly removed from the linked list. This resulted in some modules attempting to load twice.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@202412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202343 | mmichelson | 2009-06-22 09:58:24 -0500 (Mon, 22 Jun 2009) | 36 lines
Merged revisions 202341-202342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202341 | mmichelson | 2009-06-22 09:42:55 -0500 (Mon, 22 Jun 2009) | 26 lines
Fix a situation in which Asterisk would not stop retransmitting 487s.
If a CANCEL were received by Asterisk, we would send a 487 in response
to the original INVITE and a 200 OK for the CANCEL. If there were a network
hiccup which caused the 200 OK and the 487 to be lost, then the UA communicating
with Asterisk may try to retransmit its CANCEL. Asterisk's response to this used
to be to try sending another 487 to the canceled INVITE and another 200 OK to the
CANCEL.
The problem here is that the originally-sent 487 was sent "reliably" meaning that
it will be retransmitted until it is received properly. So when we receive the second
CANCEL it is likely that the first batch of 487s we sent is still going strong and
reaches the UA. The result was that the second set of 487s would be retransmitted
constantly until the maximum number of retries had been reached.
The fix for this is that if we receive a second CANCEL for an INVITE, then we cancel
the retransmission of the first set of 487s and start a second set. This causes the
dialog to be terminated reasonably.
(closes issue #14584)
Reported by: klaus3000
Patches:
14584_v2.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
r202342 | mmichelson | 2009-06-22 09:44:58 -0500 (Mon, 22 Jun 2009) | 3 lines
Remove an extra debug line left from previous commit.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@202345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202337 | mmichelson | 2009-06-22 09:35:09 -0500 (Mon, 22 Jun 2009) | 31 lines
Merged revisions 202336 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202336 | mmichelson | 2009-06-22 09:34:05 -0500 (Mon, 22 Jun 2009) | 25 lines
Fix a possible infinite loop in SDP parsing during glare situation.
There was a while loop in get_ip_and_port_from_sdp which was controlled
by a call to get_sdp_iterate. The loop would exit either if what we were
searching for was found or if the return was NULL. The problem is that
get_sdp_iterate never returns NULL. This means that if what we were searching
for was not present, the loop would run infinitely. This modification of the
loop fixes the problem.
(closes issue #15213)
Reported by: schmidts
(closes issue #15349)
Reported by: samy
(closes issue #14464)
Reported by: pj
(closes issue #15345)
Reported by: aragon
Patches:
sip_inf_loop.patch uploaded by mmichelson (license 60)
Tested by: aragon
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@202339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the "h" extension fails, give it another chance in main/pbx.c, when it
returns from the bridge code. Fixes an issue where the "h" extension may
occasionally not fire, when a Dial is executed from a Macro.
Debugged in #asterisk with user tompaw.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201783 | tilghman | 2009-06-18 15:52:36 -0500 (Thu, 18 Jun 2009) | 6 lines
One of the changes in 1.6.1 was to allow app_directory to use functionality
within app_voicemail for directory functions. It is therefore no longer
necessary for app_directory to be linked against the ODBC libraries (and it
never was necessary for app_directory to be linked against IMAP, though it
was).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r201610 | russell | 2009-06-18 10:27:10 -0500 (Thu, 18 Jun 2009) | 36 lines
Merged revisions 201600 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201600 | russell | 2009-06-18 10:24:31 -0500 (Thu, 18 Jun 2009) | 29 lines
Fix memory corruption and leakage related reloads of non files mode MoH classes.
For Music on Hold classes that are not files mode, meaning that we are executing
an application that will feed us audio data, we use a thread to monitor the
external application and read audio from it. This thread also makes use of the
MoH class object. In the MoH class destructor, we used pthread_cancel() to ask
the thread to exit. Unfortunately, the code did not wait to ensure that the
thread actually went away. What needed to be done is a pthread_join() to ensure
that the thread fully cleans up before we proceed. By adding this one line, we
resolve two significant problems:
1) Since the thread was never joined, it never fully goes away. So, on every
reload of non-files mode MoH, an unused thread was sticking around.
2) There was a race condition here where the application monitoring thread
could still try to access the MoH class, even though the thread executing
the MoH reload has already destroyed it.
(issue #15109)
Reported by: jvandal
(issue #15123)
Reported by: axisinternet
(issue #15195)
Reported by: amorsen
(issue AST-208)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201570 | dvossel | 2009-06-18 10:16:05 -0500 (Thu, 18 Jun 2009) | 11 lines
parsing extension correctly from sip register lines
If a transport type was specified, but no extension, parsing of the extension would return whatever was after the transport rather than defaulting to 's'.
(closes issue #15111)
Reported by: ffs
Patches:
chan_sip.c_register-parser.patch uploaded by ffs (license 730)
Tested by: ffs, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201462 | mmichelson | 2009-06-17 15:10:01 -0500 (Wed, 17 Jun 2009) | 12 lines
Fix problem with no audio due to ignoring the SDP.
A recent change to our SDP version comparison made audio not function
on some calls. This was because of a test wherein we were trying to
see if an unsigned value was less than 0. This is a dumb comparison
and arguably the compiler should have warned about it. Alas, though,
it slipped past. Now it's fixed by changing the variable to be a
signed type.
Found by several developers. Tested by mnicholson and dbrooks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r201458 | mmichelson | 2009-06-17 15:04:12 -0500 (Wed, 17 Jun 2009) | 15 lines
Merged revisions 201450 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201450 | mmichelson | 2009-06-17 14:59:31 -0500 (Wed, 17 Jun 2009) | 9 lines
Change the datastore traversal in ast_do_masquerade to use a safe list traversal.
It is possible for datastore fixup functions to remove the datastore from the list
and free it. In particular, the queue_transfer_fixup in app_queue does this. While
I don't yet know of this causing any crashes, it certainly could.
Found while discussing a separate issue with Brian Degenhardt.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r201445 | dvossel | 2009-06-17 14:45:35 -0500 (Wed, 17 Jun 2009) | 25 lines
Merged revisions 201423 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201423 | dvossel | 2009-06-17 14:28:12 -0500 (Wed, 17 Jun 2009) | 19 lines
StopMixMonitor race condition (not giving up file immediately)
StopMixMonitor only indicates to the MixMonitor thread to stop
writing to the file. It does not guarantee that the recording's
file handle is available to the dialplan immediately after execution.
This results in a race condition. To resolve this, the filestream
pointer is placed in a datastore on the channel. When StopMixMonitor
is called, the datastore is retrieved from the channel and the
filestream is closed immediately before returning to the dialplan.
Documentation indicating the use of StopMixMonitor to free files
has been updated as well.
(closes issue #15259)
Reported by: travisghansen
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/283/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201344 | dvossel | 2009-06-17 10:20:26 -0500 (Wed, 17 Jun 2009) | 16 lines
SIP registry ref count error
During a sip reload, the list of sip_registry objects are
supposed to be traversed, unlinked, and destroyed, but
destruction never takes place due to a ref counting error.
This causes a memory leak when registry items are removed
from sip.conf and reloaded. While the registries are removed
from the global list, they are not removed from the scheduler.
Because of this, SIP register attempts continue to be sent
out for the item even though it may no longer be in the .conf.
(closes issue #15295)
Reported by: amorsen
Review: https://reviewboard.asterisk.org/r/282/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r201262 | kpfleming | 2009-06-17 07:04:17 -0500 (Wed, 17 Jun 2009) | 15 lines
Merged revisions 201261 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201261 | kpfleming | 2009-06-17 07:03:25 -0500 (Wed, 17 Jun 2009) | 9 lines
Correct AST_LIST_APPEND_LIST behavior when list to be appended is empty.
When the list to be appended is empty, and the list to be appended to is *not*,
AST_LIST_APPEND_LIST would actually cause the target list to become broken,
and no longer have a pointer to its last entry. This patch fixes the problem.
(reported by Stanislaw Pitucha on the asterisk-dev mailing list)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r201056 | kpfleming | 2009-06-16 13:54:30 -0500 (Tue, 16 Jun 2009) | 18 lines
Merged revisions 200991 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200985 | kpfleming | 2009-06-16 11:32:36 -0500 (Tue, 16 Jun 2009) | 7 lines
Fix problems with new compiler attribute checking in configure script.
The last changes to ast_gcc_attribute.m4 caused some problems checking for
various attributes, because the scope of the symbol the attribute is applied
to can be important; this patch allows the scope to be specified for the check.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@200989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200946 | dvossel | 2009-06-16 11:03:30 -0500 (Tue, 16 Jun 2009) | 32 lines
SIP transport type issues
What this patch addresses:
1. ast_sip_ouraddrfor() by default binds to the UDP address/port
reguardless if the sip->pvt is of type UDP or not. Now when no
remapping is required, ast_sip_ouraddrfor() checks the sip_pvt's
transport type, attempting to set the address and port to the
correct TCP/TLS bindings if necessary.
2. It is not necessary to send the port number in the Contact
header unless the port is non-standard for the transport type.
This patch fixes this and removes the todo note.
3. In sip_alloc(), the default dialog built always uses transport
type UDP. Now sip_alloc() looks at the sip_request (if present)
and determines what transport type to use by default.
4. When changing the transport type of a sip_socket, the file
descriptor must be set to -1 and in some cases the tcptls_session's
ref count must be decremented and set to NULL. I've encountered
several issues associated with this process and have created a function,
set_socket_transport(), to handle the setting of the socket type.
(closes issue #13865)
Reported by: st
Patches:
dont_add_port_if_tls.patch uploaded by Kristijan (license 753)
13865.patch uploaded by mmichelson (license 60)
tls_port_v5.patch uploaded by vrban (license 756)
transport_issues.diff uploaded by dvossel (license 671)
Tested by: mmichelson, Kristijan, vrban, jmacz, dvossel
Review: https://reviewboard.asterisk.org/r/278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@200987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200943 | mvanbaak | 2009-06-16 17:51:36 +0200 (Tue, 16 Jun 2009) | 9 lines
add FILE_STORAGE to Voicemail Build Options
Voicemail can only use one storage module at the moment.
Because it's unclear that selecting one of the storage modules
in menuselect will disable filesystem storage we now have
a FILE_STORAGE option that conflicts with the other modules.
(closes issue #15333)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@200947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200764 | kpfleming | 2009-06-15 20:28:08 -0500 (Mon, 15 Jun 2009) | 11 lines
Ensure that configure-script testing for compiler attributes actually works.
The configure script tests for compiler attributes didn't actually enable
enough warnings or provide a proper test harness to determine whether the
compiler supports the attribute in question or not; this caused gcc 4.1 to
report that it supports 'weakref', but it doesn't actually support it in the
way that is needed for our optional API mechanism. The new configure script
test will properly distinguish between full support and partial support
for this attribute, among others.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@200766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200726 | kpfleming | 2009-06-15 20:03:22 -0500 (Mon, 15 Jun 2009) | 6 lines
Document the new automatic 'ignoresdpversion' behavior.
Asterisk will now automatically ignore incorrect incoming SDP version numbers
when necessary to complete a T.38 re-INVITE operation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@200728 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r165180 | mnicholson | 2008-12-17 12:49:12 -0600 (Wed, 17 Dec 2008) | 14 lines
This patch adds a new 'ignoresdpversion' option to sip.conf. When this is
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
........
r200689 | kpfleming | 2009-06-15 15:42:38 -0500 (Mon, 15 Jun 2009) | 12 lines
Accept T.38 re-INVITE responses with invalid SDP versions.
This commit changes the 'incoming SDP version' check logic a bit more; when
'ignoresdpversion' is *not* set for a peer, if we initiate a re-INVITE to
switch to T.38, we'll always accept the peer's SDP response, even if they
don't properly increment the SDP version number as they should. If this situation
occurs, a warning message will be generated suggesting that the peer's
configuration be changed to include the 'ignoresdpversion' configuration option
(although ideally they'd fix their SIP implementation to be RFC compliant).
AST-221
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@200707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the definition of new_find_extension(), the arguments 'callerid' and
'label' were swapped. The prototype declaration and all calls to the
function are ordered 'callerid' then 'label', but the function itself
was ordered 'label' then 'callerid'.
(closes issue #15303)
Reported by: JimDickenson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@199996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199818 | dvossel | 2009-06-09 15:47:57 -0500 (Tue, 09 Jun 2009) | 11 lines
CLI NOTIFY sending wrong transport type.
SIP's cli NOTIFY command only used UDP rather than copying the transport type from the peer.
(closes issue #15283)
Reported by: jthurman
Patches:
sip-notify-tcp-svn199728.patch uploaded by jthurman (license 614)
Tested by: jthurman, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@199820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199743 | dvossel | 2009-06-09 11:22:04 -0500 (Tue, 09 Jun 2009) | 11 lines
module load priority
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@199745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r199630 | seanbright | 2009-06-08 15:33:09 -0400 (Mon, 08 Jun 2009) | 32 lines
Merged revisions 199626,199628 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199626 | seanbright | 2009-06-08 15:24:32 -0400 (Mon, 08 Jun 2009) | 21 lines
Increase the size of our thread stack on 64 bit processors.
We were setting the stack size for each thread to 240KB regardless of
architecture, which meant that in some scenarios we actually had less available
stack space on 64 bit processors (pointers use 8 bytes instead of 4). So now we
calculate the stack size we reserve based on the platform's __WORDSIZE, which
gives us:
32 bit -> 240KB
64 bit -> 496KB
128 bit -> 1008KB (that's right, we're ready for 128 bit processors)
Patch typed by me but written by several members of #asterisk-dev, including
Kevin, Tilghman, and Qwell.
(closes issue #14932)
Reported by: jpiszcz
Patches:
06052009_issue14932.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
r199628 | seanbright | 2009-06-08 15:28:33 -0400 (Mon, 08 Jun 2009) | 2 lines
Fix a typo in the stack size calculation just introduced.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@199633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
