In some cases I have yet to determine some stasis messages may
be created without a channel snapshot. This change adds some
tolerance to this scenario, preventing a crash from occurring.
(cherry picked from commit a75035be55)
This change adds support for refers that are not session based. It
includes a refer implementation for the PJSIP technology which results
in out-of-dialog REFERs being sent to a PJSIP endpoint. These can be
triggered using the new ARI endpoint `/endpoints/refer`.
Resolves: #71
UserNote: There is a new ARI endpoint `/endpoints/refer` for referring
an endpoint to some URI or endpoint.
Currently, if an FXS channel is still off hook when
all calls on the line have hung up, the user is provided
reorder tone until going back on hook again.
In addition to not reflecting what most commercial switches
actually do, it's very common for switches to automatically
reoriginate for the user so that dial tone is provided without
the user having to depress and release the hookswitch manually.
This can increase convenience for users.
This behavior is now supported for kewlstart FXS channels.
It's supported only for kewlstart (FXOKS) mainly because the
behavior doesn't make any sense for ground start channels,
and loop start signalling doesn't provide the necessary DAHDI
event that makes this easy to implement. Likely almost everyone
is using FXOKS over FXOLS anyways since FXOLS is pretty useless
these days.
ASTERISK-30357 #close
Resolves: #224
UserNote: The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
sig_analog allows users to flash and use the three-way dial
tone as a primitive hold function, simply by never timing
it out.
Some systems allow this dial tone to time out to silence,
so the user is not annoyed by a persistent dial tone.
This option allows the dial tone to time out normally to
silence.
ASTERISK-30004 #close
Resolves: #205
UserNote: The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
In 8d6fdf9c3a invisible bridges were
skipped but that lead to producing metrics with no name and no help.
Keep track of the number of metrics configured and then only emit these.
Add a basic testcase that verifies that there is no '(NULL)' in the
output.
ASTERISK-30474
Fixes#221
UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by
the underlying PJSIP library. The bundled version of PJSIP supports
TLS v1.3.
c3ff4648 removed the [iaxtel700] context but neglected to remove
references to it.
This commit addresses that and also removes iaxtel and freeworlddialup
references from other config files.
The app_queue module provides both an AMI action and a CLI command
to change the priority of a caller in a queue. Up to now this change
of priority has only been reflected to new callers into the queue.
This change adds an "immediate" option to both the AMI action and
CLI command which immediately applies the priority change respective
to the other callers already in the queue. This can allow, for example,
a caller to be placed at the head of the queue immediately if their
priority is sufficient.
Resolves: #202
UserNote: The 'queue priority caller' CLI command and
'QueueChangePriorityCaller' AMI action now have an 'immediate'
argument which allows the caller priority change to be reflected
immediately, causing the position of a caller to move within the
queue depending on the priorities of the other callers.
The ast_app_getdata() and ast_app_getdata_terminator() declarations
in app.h were changed recently to return enum ast_getdata_result
(which is how they were defined in app.c). The existing
declaration of ast_getdata_result in app.h was about 1000 lines
after those functions however so under certain circumstances,
a "use before declaration" error was thrown by the compiler.
The declaration of the enum was therefore moved to before those
functions.
Resolves: #200
A change made in 82cebaa0 did not properly handle the case when a
channel was not provided, triggering a crash. ast_check_hangup(...)
does not protect against NULL pointers.
Fixes#180
in a particular mailbox folder. The forward command can be used
to copy a message within a mailbox or to another mailbox. Also adds
a VoicemailBoxSummarry, required to retrieve message ID's.
Resolves: #181
UserNote: The following manager actions have been added
VoicemailBoxSummary - Generate message list for a given mailbox
VoicemailRemove - Remove a message from a mailbox folder
VoicemailMove - Move a message from one folder to another within a mailbox
VoicemailForward - Copy a message from one folder in one mailbox
to another folder in another or the same mailbox.
Adds CLI commands to allow move/remove/forward individual messages
from a particular mailbox folder. The forward command can be used
to copy a message within a mailbox or to another mailbox. Also adds
a show mailbox, required to retrieve message ID's.
Resolves: #170
UserNote: The following CLI commands have been added to app_voicemail
voicemail show mailbox <mailbox> <context>
Show contents of mailbox <mailbox>@<context>
voicemail remove <mailbox> <context> <from_folder> <messageid>
Remove message <messageid> from <from_folder> in mailbox <mailbox>@<context>
voicemail move <mailbox> <context> <from_folder> <messageid> <to_folder>
Move message <messageid> in mailbox <mailbox>&<context> from <from_folder> to <to_folder>
voicemail forward <from_mailbox> <from_context> <from_folder> <messageid> <to_mailbox> <to_context> <to_folder>
Forward message <messageid> in mailbox <mailbox>@<context> <from_folder> to
mailbox <mailbox>@<context> <to_folder>
From the gdb information, it was found that when calling __ast_free, the size of the
allocated space pointed to by the pointer matches the size created when rtp->themssrc_valid
is equal to 0. However, in reality, when reading the value of rtp->themssrc_valid in gdb,
it is found to be 1.
Within ast_rtcp_write(), the call to ast_rtp_rtcp_report_alloc() uses rtp->themssrc_valid,
which is outside the protection of the rtp_instance lock. However,
ast_rtcp_generate_report(), which is called by ast_rtcp_generate_compound_prefix(), uses
rtp->themssrc_valid within the protection of the rtp_instance lock.
This can lead to the possibility that the value of rtp->themssrc_valid used in the call to
ast_rtp_rtcp_report_alloc() may be different from the value of rtp->themssrc_valid used
within ast_rtcp_generate_report().
Resolves: asterisk#63
This deprecates the users.conf config file, which
is no longer as widely supported but still integrated
with a number of different modules.
Because there is no real mechanism for marking a
configuration file as "deprecated", and users.conf
is not just used in a single place, this now emits
a warning to the user when the PBX loads to notify
about the deprecation.
This configuration mechanism has been widely criticized
and discouraged since its inception, and is no longer
relevant to the configuration that most users are doing
today. Removing it will allow for some simplification
and cleanup in the codebase.
Resolves: #183
UpgradeNote: The users.conf config is now deprecated
and will be removed in a future version of Asterisk.
In PROpenedOrUpdated, the cherry-pick reminder will now be
suppressed if there are already valid 'cherry-pick-to' comments
in the PR or the PR contained a 'cherry-pick-to: none' comment.
When immediate=yes on an FXS channel, sig_analog will
start fake audible ringback that continues until the
channel is answered. Even if it answers immediately,
the ringback is still audible for a brief moment.
This can be disruptive and unwanted behavior.
This adds an option to disable this behavior, though
the default behavior remains unchanged.
ASTERISK-30003 #close
Resolves: #118
UserNote: The immediatering option can now be set to no to suppress
the fake audible ringback provided when immediate=yes on FXS channels.
This accomplishes the same thing as a `find ... | sort` but with the
added benefit of clarity and avoiding a call to a subshell.
Additionally drop the -s option from call to patch as it is not POSIX.
The apply_patches script wasn't sorting the list of patches in
the "patches" directory before applying them. This left the list
in an indeterminate order. In most cases, the list is actually
sorted but rarely, they can be out of order and cause dependent
patches to fail to apply.
We now sort the list but the "sort" program wasn't in the
configure scripts so we needed to add that and regenerate
the scripts as well.
Resolves: #193
Fixes two compilation errors in app_voicemail_imap, one due to an unsed
variable and one due to a new variable added in the incorrect location
in _163.
Resolves: #174
Adds last locked and unlocked timestamps as well as a
counter for the number of times the lock has been
attempted (vs locked/unlocked) to debug output printed
using the DEBUG_THREADS option.
Resolves: #110
The new documentation site uses traditional markdown instead
of the Confluence flavored version. This required changes in
the mustache templates and the python that generates the files.
Some callers of __messagecount did not correctly handle error return,
instead returning a -1 message count.
This caused a notification with "Messages-Waiting: yes" and
"Voice-Message: -1/0 (0/0)" if the IMAP server was unavailable.
Fixes: #64
Added two new functions (ast_sip_session_get_dialog and
ast_sip_session_get_pjsip_inv_state) that retrieve the dialog and the
pjsip_inv_state respectively from the pjsip_inv_session on the
ast_sip_session struct. This is due to pjproject adding a new field to
the pjsip_inv_session struct that caused crashes when trying to access
fields that were no longer where they were expected to be if a module
was compiled against a different version of pjproject.
Resolves: #145
This adds an option 'force_longest_waiting_caller' which changes the
global behavior of the queue engine to prevent queue callers from
'jumping ahead' when an agent is in multiple queues.
Resolves: #108
Also closes old asterisk issues:
- ASTERISK-17732
- ASTERISK-17570
Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce
These were uncovered when trying to run `bootstrap.sh` with Autoconf
2.71:
* AC_CONFIG_HEADER() is deprecated in favor of AC_CONFIG_HEADERS().
* AC_HEADER_TIME is obsolete.
* $as_echo is deprecated in favor of AS_ECHO() which requires an update
to ax_pthread.m4.
Note that the generated artifacts in this commit are from Autoconf 2.69.
Resolves#139
