Send/RcvFax support
Introduce t.38 controls between asterisk core and channel/proto layers.
Not all parameters are transferred from proto layers but *Fax apps
tested and work ok.
(issue #18693)
Reported by: benngard2
Patches:
issue-18693.patch uploaded by may213 (license 454)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves the data store destruction and app signaling events for a call to ast_hangup so that threads which wait for data store destruction
don't become stuck forever when attached to an application/function/etc that keeps the channel open.
(closes issue #18742)
Reported by: jkister
Patches:
patch.diff uploaded by jrose (license 1225)
Tested by: jkister, jcovert, jrose
Review: https://reviewboard.asterisk.org/r/1136/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310635 | rmudgett | 2011-03-14 11:47:54 -0500 (Mon, 14 Mar 2011) | 32 lines
Merged revisions 310633 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310633 | rmudgett | 2011-03-14 11:38:24 -0500 (Mon, 14 Mar 2011) | 25 lines
"Caller*ID failed checksum" on Wildcard TDM2400P and TDM410
The last character in the caller id message is getting a framing error.
The checksum is the last character in the message. A framing error in the
checksum could be because:
1) The sender did not send a full stop bit.
2) The sender cut off the FSK carrier too soon.
3) The sender opted to send zero of the specified zero to 10 trailing mark
bits and round-off errors in the code resulted in the code not being where
it thought it was in the demodulated bit stream.
Bit 8 of 'b' is set when parity error.
Bit 9 of 'b' is set when framing error.
Made ignore the framing and parity error bits if the errored character is
the checksum. We can tolerate a framing/parity error there. The checksum
character validates the message.
(closes issue #18474)
Reported by: nivek
Patches:
callerid.c.1.patch uploaded by nivek (license 636) (with modifications)
Tested by: nivek
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310448 | tilghman | 2011-03-12 14:24:54 -0600 (Sat, 12 Mar 2011) | 38 lines
Recorded merge of revisions 310435 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310435 | tilghman | 2011-03-12 14:22:07 -0600 (Sat, 12 Mar 2011) | 31 lines
Add AELSub, which provides a stable entry point into AEL subroutines.
This commit needs some explanation, given that we're adding a new application
into an existing release branch. This is generally a violation of our release
policy, except in very limited circumstances, and I believe this is one of
those circumstances.
The problem that this solves is one of the sanity of using multiple dialplan
languages to define a dialplan. In the case of the reporter, he or she is
using AEL is define subroutines, while using Realtime extensions to invoke
those subroutines. While you can do this, it's based upon the reality of AEL
using actual dialplan extensions; however, there is no guarantee that the
details of _how_ AEL is compiled into extensions will remain stable. In fact,
at the time of this commit, it has already changed twice, once in a
fundamental way.
Now normally, a new application would only be added to trunk. However, this
application is explicitly to create a stable user-level API between versions,
and adding it to trunk only will not solve the user's problem of switching
between 1.6.2 and 1.8, nor will it help anybody switching from 1.8 to 1.10.
Therefore, it needs to go into existing release branches. For the sake of
consistency, and also because one of the changes was between 1.4 and 1.6.x,
I am also electing to commit this to 1.4.
(closes issue #18910)
Reported by: alexandrekeller
Patches:
20110304__issue18919__1.6.2.diff.txt uploaded by tilghman (license 14)
20110304__issue18919__1.4.diff.txt uploaded by tilghman (license 14)
Tested by: alexandrekeller
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the channel condition is one of the following after breaking out of the loop, don't try to update_peer
(where x = 0/1)
1). ZOMBIE
2). cx->tech_pvt != pvtx
3). gluex != ast_rtp_instance_get_glue(cx->tech->type))
(closes issue #18781)
Reported by: alecdavis
Patches:
bug18781.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, ZX81
Review: https://reviewboard.asterisk.org/r/1128/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r309204 changed the behavior of ast_http_send. It now requires headers
to be passed with trailing \r\n. This change updates the remaining
instances in the code that did not pass the \r\n.
(closes issue #18186)
Reported by: nivaldomjunior
Patches:
res_phoneprov.c.diff uploaded by lathama (license 1028)
manager.diff.txt uploaded by twilson (license 396)
Tested by: lathama
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309541 | mnicholson | 2011-03-04 12:59:20 -0600 (Fri, 04 Mar 2011) | 4 lines
Check for errors from fseek() when loading config file, properly abort on errors from fread(), and supply a traceback for errors generated when loading the config file.
Also, prepend a newline to traceback output so that the main error message is on it's own line.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309255 | qwell | 2011-03-02 13:53:47 -0600 (Wed, 02 Mar 2011) | 8 lines
Fix usage of "hasvoicemail=yes" and "mailbox=" in users.conf for SIP.
Since it's a duplicate, nothing is going to be done, so delme doesn't need to
be set at all. Strangely, when this was added, this was being set to 1 in 1.6,
and 0 in trunk.
(issue AST-439)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added XML documentation for CHANNEL(keypad_digits) and
CHANNEL(no_media_path).
* Tweaked XML documentation for CHANNEL(reversecharge).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309170 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309033 | tilghman | 2011-02-28 04:43:12 -0600 (Mon, 28 Feb 2011) | 4 lines
A later version of flex already includes the fwrite workaround code, which if used twice causes a compilation error.
Detect whether Flex will compile without the workaround; if so, suppress our workaround code.
........
r309034 | tilghman | 2011-02-28 05:07:52 -0600 (Mon, 28 Feb 2011) | 2 lines
Clarify meaning, removing double negative (stupid!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Call path
sip_set_rtp_peer (locks chan then pvt)
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper (locks p->owner)
But by the time p->owner lock was attempted, seems as though chan and p->owner were different.
So in sip_set_rtp_peer, lock pvt first then lock p->owner using deadlocking methods.
(closes issue #18837)
Reported by: alecdavis
Patches:
bug18837-trunk.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, Irontec, ZX81, cmaj
Review: [https://reviewboard.asterisk.org/r/1126/]
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@308945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind reported that ast_channel_set_caller_event() was reading data
from a freed buffer when using the pre_set structure.
Rearange things to pre-calculate the name and number pointer before
updating the caller party structure to see if the name or number was
changed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@308903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308814 | twilson | 2011-02-24 11:54:49 -0600 (Thu, 24 Feb 2011) | 19 lines
Merged revisions 308813 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308813 | twilson | 2011-02-24 11:42:16 -0600 (Thu, 24 Feb 2011) | 12 lines
Don't broadcast FullyBooted to every AMI connection
The FullyBooted event should not be sent to every AMI connection every
time someone connects via AMI. It should only be sent to the user who
just connected.
(closes issue #18168)
Reported by: FeyFre
Patches:
bug0018168.patch uploaded by FeyFre (license 1142)
Tested by: FeyFre, twilson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@308815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308007 | qwell | 2011-02-15 17:33:24 -0600 (Tue, 15 Feb 2011) | 17 lines
Merged revisions 308002 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308002 | qwell | 2011-02-15 17:32:20 -0600 (Tue, 15 Feb 2011) | 10 lines
Fix regression that changed behavior of queues when ringing a queue member.
This reverts r298596, which was to fix a highly bizarre and contrived issue
with a queue member that called into his own queue being transferred back
into his own queue. I couldn't reproduce that issue in any way. I think one
of the other recent transfer fixes actually fixed this.
(closes issue #18747)
Reported by: vrban
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@308010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
